| 782/773D Timken Tapered Roller Bearings | P60°:104 kN; J min.:295.275 mm; Cap bolt, SAE grade:8; L:387.35 mm; A2:173.037 mm; db:114.3 mm; Pa:18.1 kN; End plug (suffix Y):EPR 12; Labyrinth ring (dc shaft position):LOR 106; h:60.325 mm; Cap bolt recommended tightening torque:515.2 N·m; P150°:35.6 kN; Bearing limiting speed:3400 r/min; ba:52.388 mm; J1:60.325 mm; Cap bolt:2 x 3/4-10 UNC; dc:96.838 mm; N1:22.225 mm; Appropriate attachment bolt size G:0.75 in; |
| EE295102/295192CD Timken Tapered Roller Bearings | Cap bolt:2 x 7/16-14 UNC; J min.:158.75 mm; da:36.513 mm; Mass pillow block:5.28 kg; R1:28.575 mm; R2:12.7 mm; Pa:3.09 kN; P120°:7.56 kN; Taconite seal:TER 17; N1:15.875 mm; Da:85.001 mm; L:209.55 mm; A1:60.325 mm; S:2.778 mm; H:112.713 mm; h:24.606 mm; End plug (suffix Y):EPR 3; H1:57.15 mm; Cap bolt recommended tightening torque:61 N·m; ba:24.606 mm; |
| 71432/71751D Timken Tapered Roller Bearings | A2:260.35 mm; Taconite seal:TER 139; P60°:301 kN; Da:259.999 mm; ba:64.294 mm; R2:38.1 mm; Mass pillow block:87.5 kg; End plug (suffix Y):EPR 18; L:511.175 mm; P180°:127 kN; h:44.45 mm; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; R1:87.313 mm; Pa:34 kN; Housing:SAFS 034 KA; Cap bolt, SAE grade:8; P120°:116 kN; H1:152.4 mm; J1:85.725 mm; |
| H239649/H239612CD Timken Tapered Roller Bearings | Basic dynamic load rating C:52.7 kN; l1:40 mm; Shaft design:Shaft with inch fema; Housing material:Machined steel; Mass:4.36 kg; GF:M12x1.75; Maximum disc diameter max.:800 mm; B:82 mm; s:3.9 mm; Recommended maximum temperature max.:50 °C; Recommended tightening torque for self-locking shaft nut:475 N·m; B1:67 mm; J:133.35 mm; Recommended minimum temperature min.:-20 °C; Corrosion protection:Zinc-coated housing; |
| HM120848/HM120817XD Timken Tapered Roller Bearings | G:M 140x2; d3:180 mm; d1:127 mm; Hydraulic nut:HMV 28 E; B:28 mm; B1:82 mm; Mass adapter sleeve assembly:2.8 kg; d:140 mm; |
| 93825/93127CD Timken Tapered Roller Bearings | Bearing number:387A/382S; Size (mm):57.15x96.838x25.4; Bore Diameter (mm):57,15; Outer Diameter (mm):96,838; Width (mm):25,4; d:57,15 mm; D:96,838 mm; T:25,4 mm; B:21,946 mm; C:20,274 mm; Weight:0,65 Kg; Basic dynamic load rating (C):78 kN; Basic static load rating (C0):96,5 kN; (Grease) Lubrication Speed:3700 r/min; |
| M224749/M224710D Timken Tapered Roller Bearings | Calculation factor Y1:2.3; D1 ≈:316 mm; K:7.5 mm; D:360 mm; Calculation factor e:0.3; Calculation factor Y0:2.2; d:240 mm; ra max.:2.5 mm; B:118 mm; da min.:253 mm; d2 ≈:265 mm; Mass bearing:41.5 kg; r1,2 min.:3 mm; b:13.9 mm; Basic static load rating C0:2700 kN; Da max.:347 mm; Fatigue load limit Pu:228 kN; Reference speed:1100 r/min; Limiting speed:2500 r/min; Calculation factor Y2:3.4; |
| M541349/M541310CD Timken Tapered Roller Bearings | D1:93 mm; D:155 mm; Mass housing washer:1.33 kg; B:13.5 mm; r1,2 min.:1.5 mm; |
| EE130889/131401CD Timken Tapered Roller Bearings | with cylindrical bore:700 min-1; Pu:1120 kN; Static (Cor):8.3 mm; Oil:191.920 kN; B:109 mm; Grease:1980 kN; d:160 mm; with tapered bore:900 min-1; rs (min):2.1 mm; D:270 mm; Dynamic (Cr):4.5 mm; |
| 98394X/98789D Timken Tapered Roller Bearings | Max. speed for Taconite seal:625 r/min; P90°:180 kN; P150°:105 kN; ba:61.119 mm; Appropriate attachment bolt size G:1 in; Cap bolt, SAE grade:8; A2:260.35 mm; Initial grease fill:481.95 g; Stabilizing ring:SR-28-0; RG:3/4 NPT; P60°:301 kN; da:123.825 mm; PG:1/4 NPT; Ca:77.8 mm; H:298.45 mm; L:511.175 mm; End plug (suffix Y):EPR 27; Cap bolt recommended tightening torque:813.5 N·m; |
| 36690/36620D Timken Tapered Roller Bearings | r1 min.:1.5 mm; C:76.2 mm; Da max.:152.5 mm; Mass plain bearing:9.1 kg; B:152.4 mm; Da min.:139.5 mm; da max.:124.6 mm; r2 min.:1 mm; Basic dynamic load rating C:1340 kN; dk:146.05 mm; Specific static load factor K0:300 N/mm²; da min.:110 mm; ra max.:1.5 mm; α:5 °; Material constant KM:330; Basic static load rating C0:2650 kN; D:158.75 mm; rb max.:1 mm; Design (sliding contact surface combination):Steel/steel; |
| 594A/592D Timken Tapered Roller Bearings | G1:24 mm; B1:184 mm; B2:202 mm; G:Tr 340x5; Mass withdrawal sleeve:18 kg; G2:G 1/8; A:6.5 mm; Hydraulic nut:HMV 68 E; d:320 mm; d1:300 mm; |