| 71425/71751D Timken Tapered Roller Bearings | A1:79.375 mm; P180°:19.1 kN; Labyrinth ring (db shaft position):LOR 55; H1:76.2 mm; P120°:18 kN; End plug (suffix Y):EPR 7; Stabilizing ring:SR-13-0; db:77.787 mm; J min.:206.375 mm; Ca:39.014 mm; dc:61.913 mm; Cap bolt:2 x 1/2-13 UNC; H2:25.4 mm; PG:1/8 NPT; S:3.969 mm; N1:19.05 mm; R2:15.875 mm; P150°:16 kN; Pa:12 kN; Cap bolt, SAE grade:5; |
| L521949/L521910D Timken Tapered Roller Bearings | Oil Speed Rating n2:1900 rpm; Basic Dynamic Radial Load Rating C:494000 N; Grease Speed Rating n1:1500 rpm; Fillet Radius rb:1.00 mm; d:180.000 mm; B:104.00 mm; Fillet Radius ra:3.00 mm; D:320.0000 mm; Basic Static Radial Load Rating Co:780000 N; |
| HM921343/HM921310D Timken Tapered Roller Bearings | J:260 mm; P180°:215 kN; Oil seal:2 x TSN 613 U; J6:288 mm; Q150°:125 kN; Ca:58 mm; End cover:ASNH 516-613 R; Mass housing:9.5 kg; Appropriate attachment bolt, size G:16 mm; P0°:350 kN; Da:140 mm; Cap bolt, size:M 12x70; da:60 mm; Pa:140 kN; H2:32 mm; Oil level, min.:36 mm; P150°:175 kN; J1:50 mm; A1:90 mm; H:177 mm; |
| 46792/46720CD Timken Tapered Roller Bearings | Grease:744 kN; Pu:587 kN; rs (min):3 mm; with cylindrical bore:1 800 min-1; Dynamic (Cr):4.5 mm; B:67 mm; Static (Cor):8.3 mm; d:95 mm; D:200 mm; with tapered bore:2 300 min-1; Oil:80.340 kN; |
| H249148/H249111CD Timken Tapered Roller Bearings | d2 ≈:345 mm; G:Tr 320x5; b:16.7 mm; D:500 mm; d1:280 mm; r1,2 min.:5 mm; G1:30 mm; Basic static load rating C0:5100 kN; B:160 mm; K:9 mm; Da max.:480 mm; B2 ≈:200 mm; Fatigue load limit Pu:380 kN; ra max.:4 mm; B1:192 mm; Mass bearing + sleeve:140 kg; D1 ≈:434 mm; Calculation factor Y2:3.4; Basic dynamic load rating C:3368 kN; Calculation factor Y1:2.3; |
| 94687/94114CD Timken Tapered Roller Bearings | Fatigue load limit Pu:6 kN; Mass needle roller and cage assembly:0.037 kg; Reference speed:11000 r/min; U:20 mm; Ew:42 mm; Limiting speed:13000 r/min; Fw:35 mm; Basic static load rating C0:50 kN; Basic dynamic load rating C:29.2 kN; |
| HM231149/HM231111CD Timken Tapered Roller Bearings | Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:400000 N; Grease Speed Rating n1:1900 rpm; Fillet Radius rb:1.00 mm; D:225.0000 mm; B:108.00 mm; Basic Dynamic Radial Load Rating C:351000 N; Oil Speed Rating n2:2700 rpm; d:90.000 mm; |
| 941/932CD Timken Tapered Roller Bearings | d2:101.6 mm; Attachment bolt diameter G:15.875 mm; da:63.5 mm; Mass bearing unit:8.16 kg; B:85.725 mm; A1:91.281 mm; A:73.025 mm; L:266.7 mm; H:144.463 mm; S:0.794 mm; J min.:209.55 mm; s:31.75 mm; Basic dynamic load rating C:148 kN; H2:41.275 mm; Limiting speed:3800 r/min; H1:69.85 mm; J max.:222.25 mm; |
| 67782/67720CD Timken Tapered Roller Bearings | Sealed Speed Rating n3:7500 rpm; Basic Static Radial Load Rating Co:10800 N; Basic Dynamic Radial Load Rating C:21200 N; d:25.000 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:14000 rpm; B:17.00 mm; Accessories:Shield & Seal; D:62.0000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Grease Speed Rating n1:11000 rpm; |
| LM119348/LM119311D Timken Tapered Roller Bearings | ra max.:2.5 mm; H:95 mm; D:230 mm; Mass bearing (including seat washer where applicable):20 kg; Basic dynamic load rating C:410 kN; da min.:181 mm; Fatigue load limit Pu:34.5 kN; d1 ≈:225 mm; Limiting speed:1300 r/min; Basic static load rating C0:1220 kN; d:110 mm; Minimum load factor A:7.7; Da max.:159 mm; Reference speed:900 r/min; r1,2 min.:3 mm; D1 ≈:113 mm; |
| 782/773D Timken Tapered Roller Bearings | P60°:104 kN; J min.:295.275 mm; Cap bolt, SAE grade:8; L:387.35 mm; A2:173.037 mm; db:114.3 mm; Pa:18.1 kN; End plug (suffix Y):EPR 12; Labyrinth ring (dc shaft position):LOR 106; h:60.325 mm; Cap bolt recommended tightening torque:515.2 N·m; P150°:35.6 kN; Bearing limiting speed:3400 r/min; ba:52.388 mm; J1:60.325 mm; Cap bolt:2 x 3/4-10 UNC; dc:96.838 mm; N1:22.225 mm; Appropriate attachment bolt size G:0.75 in; |
| 67390/67322D Timken Tapered Roller Bearings | Lw:17.8 mm; r2 max.:0.8 mm; Mass needle roller:0.99 g; r1,2 min.:0.2 mm; r1 max.:0.6 mm; Dw:3 mm; |