| 56425/56650D Timken Tapered Roller Bearings | Calculation factor (back-to-back, face-to-face) Y0:0.76; r3,4 min.:0.2 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; C1:4.9 mm; d:12 mm; Calculation factor f1:0.99; Reference grease quantity Gref:0.27 cm³; Basic static load rating C0:1.83 kN; Mass bearing:0.018 kg; Calculation factor f:1.03; Static axial stiffness, preload class B:49 N/µm; d2:17.1 mm; K:0.5 mm; d1:17.1 mm; |
| H247536/H247510CD Timken Tapered Roller Bearings | D:22 mm; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:0.013 kg; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; B:12 mm; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; d:16 mm; Permissible sliding velocity v min.:0.25 m/s; |
| 48290/48220D Timken Tapered Roller Bearings | B:125 mm; G3:15 mm; Hydraulic nut:HMV 212E; B5:154 mm; d1:1000 mm; A:12 mm; G2:G 1/4; d:1060 mm; Mass adapter sleeve assembly:984 kg; B1:622 mm; d3:1300 mm; G:Tr 1060x8; |
| 95525/95927CD Timken Tapered Roller Bearings | Grease Speed Rating n1:11000 rpm; d:15.000 mm; Sealed Speed Rating n3:11000 rpm; Basic Dynamic Radial Load Rating C:15100 N; Oil Speed Rating n2:15000 rpm; D:42.0000 mm; Basic Static Radial Load Rating Co:9300 N; Fillet Radius ra:1.00 mm; Accessories:No Shield, no Seal; B:19.1 mm; |
| 52401/52637D Timken Tapered Roller Bearings | d:65.000 mm; Oil Speed Rating Open/Shielded n2:4100 rpm; Basic Static Radial Load Rating Co:112000 N; Basic Dynamic Radial Load Rating C:128000 N; Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:3400 rpm; D:160.0000 mm; Fillet Radius ra:2.00 mm; B:37.00 mm; |
| M252337/M252310CD Timken Tapered Roller Bearings | Labyrinth ring:2 x LOR 146; Bearing limiting speed:2600 r/min; R2:41.275 mm; Cap bolt recommended tightening torque:1220 N·m; Cap bolt, SAE grade:8; R1:114.3 mm; Da:319.999 mm; P180°:202 kN; A2:254 mm; Housing:SSAFS 536; Ca:95.809 mm; h:60.325 mm; P90°:320 kN; S:4.763 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt:1-8 UNC; ba:75.406 mm; L:679.45 mm; Stabilizing ring:SR-36-30; Pa:46.3 kN; |
| 96825/96140CD Timken Tapered Roller Bearings | Basic static load rating C0:45 kN; Recommended tightening torque for disc screws:100 N·m; Recommended minimum temperature min.:-20 °C; GS:M20x1.5; D:168 mm; Sealing system:SKF Mudblock seal; Maximum disc diameter max.:800 mm; Corrosion protection:Zinc-coated housing; Recommended lower temperature limit for storage (static):-50 °C; GF:M14x1.5; Recommended maximum temperature max.:50 °C; |
| 71432/71751D Timken Tapered Roller Bearings | A2:260.35 mm; Taconite seal:TER 139; P60°:301 kN; Da:259.999 mm; ba:64.294 mm; R2:38.1 mm; Mass pillow block:87.5 kg; End plug (suffix Y):EPR 18; L:511.175 mm; P180°:127 kN; h:44.45 mm; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; R1:87.313 mm; Pa:34 kN; Housing:SAFS 034 KA; Cap bolt, SAE grade:8; P120°:116 kN; H1:152.4 mm; J1:85.725 mm; |
| 81629/81963CD Timken Tapered Roller Bearings | Dynamic (Ca):2860 kN; d2 (max):mm; r1s (min):4.7 mm; b1:mm; d2:600 mm; E:mm; b:mm; Pu:419.070 kN; s:7 mm; B:150 mm; Static (Coa):6200 kN; D:830 mm; F:659 mm; rs (min):4.7 mm; |
| LM522548/LM522510D Timken Tapered Roller Bearings | Weight W:0.32 kg; Insert Bearing IB:ZMaRC; Dimension B:79.4 mm; Dimension L:90.5 mm; Dimension G:11.1 mm; Pin Dia A1:6.4 mm; Basic Dynamic Radial Load Rating:14000 N; Dimension H:22.2 mm; Dimension N:19.8 mm; Width A:34.9 mm; Basic Static Radial Load Rating Co:7800 N; Shaft Diameter D:25 mm; Dimension S1:19.8 mm; Dimension J:7.9 mm; Dimension C:66.7 mm; Dimension D2:55.5 mm; |
| LM522549/LM522510D Timken Tapered Roller Bearings | Oil:79.040 kN; Static (Cor):5.5 mm; with cylindrical bore:1 800 min-1; d:110 mm; rs (min):2 mm; Pu:402 kN; with tapered bore:2 200 min-1; D:170 mm; Dynamic (Cr):3 mm; Grease:717 kN; B:60 mm; |
| 67983/67920CD Timken Tapered Roller Bearings | Fatigue load limit Pu:0.8 kN; T:58.9 mm; Recommended diameter for attachment bolts, mm G:12 mm; Recommended diameter for attachment bolts, inch G:0.5 in; N:14.8 mm; A1:17 mm; Db:98 mm; J:101.5 mm; Mass bearing unit:0.99 kg; Hexagonal key size for grub screw N:5 mm; A3:3.2 mm; Housing material:Composite; Basic dynamic load rating C:30.7 kN; Basic static load rating C0:19 kN; Da:115.9 mm; L:130 mm; A5:23.5 mm; |