| HM237535/HM237510CD Timken Tapered Roller Bearings | d1:57.15 mm; B:15 mm; d3:85 mm; d:65 mm; B1:65 mm; G:M 65x2; Hydraulic nut:HMV 13 E; Mass adapter sleeve assembly:0.66 kg; |
| LM249748/LM249710CD Timken Tapered Roller Bearings | D:200.0000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:0 rpm; d:160.000 mm; Basic Dynamic Radial Load Rating C:49400 N; Accessories:Two Seals; B:20.00 mm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; |
| 685/672D Timken Tapered Roller Bearings | B2:145 mm; G:M 190x3; B1:134 mm; Mass withdrawal sleeve:3.75 kg; d1:170 mm; d:180 mm; Hydraulic nut:HMV 38 E; G1:16 mm; |
| 64433/64700D Timken Tapered Roller Bearings | Basic Static Radial Load Rating Co:57000 N; B:47.00 mm; D:215.0000 mm; Grease Speed Rating n1:2800 rpm; Oil Speed Rating n2:3400 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:143000 N; d:100.000 mm; |
| EE132084/132126D Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:28100 N; D:72.0000 mm; Grease Speed Rating n1:9000 rpm; B:19.00 mm; Sealed Speed Rating n3:6300 rpm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:16000 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Fillet Radius ra:1.00 mm; d:30.000 mm; Oil Speed Rating n2:11000 rpm; Accessories:Two Shields & Snap-R; |
| HH221440/HH221410D Timken Tapered Roller Bearings | d:180.000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Basic Static Radial Load Rating Co:200000 N; B:46.00 mm; Basic Dynamic Radial Load Rating C:190000 N; D:280.0000 mm; Accessories:Shield & Seal; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1400 rpm; Grease Speed Rating Open/Shielded n1:2000 rpm; |
| DX641856/DX97964 Timken Tapered Roller Bearings | Basic Static Radial Load Rating Co:3650 N; B:9.00 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:18000 rpm; d:20.000 mm; Oil Speed Rating Open/Shielded n2:22000 rpm; Sealed Speed Rating n3:12000 rpm; Accessories:Two Shields; D:37.0000 mm; Basic Dynamic Radial Load Rating C:6370 N; |
| 46792/46720CD Timken Tapered Roller Bearings | Grease:744 kN; Pu:587 kN; rs (min):3 mm; with cylindrical bore:1 800 min-1; Dynamic (Cr):4.5 mm; B:67 mm; Static (Cor):8.3 mm; d:95 mm; D:200 mm; with tapered bore:2 300 min-1; Oil:80.340 kN; |
| 795/792CD Timken Tapered Roller Bearings | d1:84.3 mm; Static axial stiffness, preload class A:152 N/µm; Preload class B GB:577 N; d2:81.8 mm; Mass bearing:0.29 kg; C2:2.8 mm; Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (back-to-back, face-to-face) Y0:0.76; Reference grease quantity Gref:4.5 cm³; Attainable speed for grease lubrication:18500 r/min; da min.:79.6 mm; Preload class C GC:1150 N; Calculation factor e:0.68; |
| 98394X/98789D Timken Tapered Roller Bearings | Max. speed for Taconite seal:625 r/min; P90°:180 kN; P150°:105 kN; ba:61.119 mm; Appropriate attachment bolt size G:1 in; Cap bolt, SAE grade:8; A2:260.35 mm; Initial grease fill:481.95 g; Stabilizing ring:SR-28-0; RG:3/4 NPT; P60°:301 kN; da:123.825 mm; PG:1/4 NPT; Ca:77.8 mm; H:298.45 mm; L:511.175 mm; End plug (suffix Y):EPR 27; Cap bolt recommended tightening torque:813.5 N·m; |
| X32044XM/NP099132 Timken Tapered Roller Bearings | b:4.2 mm; Fatigue load limit Pu:1.9 kN; Mass bearing:0.32 kg; a:73 mm; rb max.:0.6 mm; r3,4 min.:0.6 mm; Basic static load rating C0:51 kN; Basic dynamic load rating C:27.5 kN; Frictional moment:0.3 N·m; r1,2 min.:0.3 mm; d:20 mm; Static axial stiffnes:680 N/µm; D2:43.2 mm; ra max.:0.3 mm; Attainable speed:3800 r/min; Da max.:43 mm; d2:32.2 mm; H:28 mm; Preload:1650 N; da min.:25 mm; |
| 48282/48220D Timken Tapered Roller Bearings | D:80 mm; r3,4 min.:0.6 mm; Db max.:75.8 mm; Calculation factor Y1:0.92; d1 ≈:56.07 mm; Mass bearing:0.37 kg; rb max.:0.6 mm; Calculation factor A:0.00419; r1,2 min.:1.1 mm; Da max.:73 mm; Basic dynamic load rating C:41.5 kN; d2 ≈:48.08 mm; B:18 mm; Basic static load rating C0:29 kN; Calculation factor Y0:0.76; Limiting speed:16000 r/min; Calculation factor Y2:0.87; d:40 mm; D1 ≈:65.45 mm; |