| DODGE FC-IP-104R Flange Block Bearings | B:28 mm; Characteristic inner ring frequency, BPFI:6.42 Hz; da min:94 mm; Nlim (grease):4,200 rpm; Characteristic cage frequency, FTF:0.42 Hz; Fatigue limit load, Cu:2.7 kN; Characteristic outer ring frequency, BPF0:4.58 Hz; Characteristic rolling element frequency, BSF:5.78 Hz; d:85 mm; Mass:1.79 kg; |
| DODGE TP-E-303R Take Up Unit Bearings | Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; B1:30.9 mm; Weight:0.25 kg; Designation of bearing:ES204G2; H1:2.4 mm; C:12.8 kN; s1:24.2 mm; d1:32.4 mm; d:20 mm; |
| DODGE FC-S2-407LE Flange Block Bearings | A5:18.8 mm; N1:16 mm; G:M6x1; A1:12 mm; L2:13 mm; SW:3.97 mm; P:230 mm; H1:89 mm; T max.:100 °C; N2:37 mm; |
| DODGE FC-DL-108 Flange Block Bearings | A1:7 mm; C:14 kN; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FC205N-; A4:21 mm; T min.:-20 °C; Weight:1.09 kg; A2:36.9 mm; H3:70; |
| 3.438 Inch | 87.325 Millimeter x 6.375 Inch | 161.925 Millimeter x 5.5 Inch | 139.7 Millimeter DODGE P2B-SD-307 Pillow Block Bearings | A:64 mm; C:43.55 kN; L3:95 mm; N:35mm; N2:64 mm; H1:130 mm; C0:29.2 kN; A5:33.4 mm; Designation of bearing:UC211-35G2T20; T max.:200 °C; Size (mm):3.438 Inch | 87.325 Millimeter x 6.375 Inch | 161.925 Millimeter x 5.5 Inch | 139.7 Millimeter ; |
| DODGE WSTU-E-115R Take Up Unit Bearings | s1:26.85 mm; A4:36 mm; H3:135; J:160 mm; Recommended tightening torque for set screw:22 Nm; T min.:-40 °C; e:17 mm; N:19mm; Z:73.1 mm; Designation of bearing:US212G2T04; |
| DODGE F4B-SCMAH-111 Flange Block Bearings | B:31 mm; A:32 mm; A2:37.3 mm; S:12.7 mm; C0:6.65 kN; T min.:-20 °C; J:90 mm; A4:28.5 mm; Recommended tightening torque for set screw:5.5 Nm; A1:10 mm; |
| DODGE F2B-SCM-115-NL Mounted Units & Inserts | A:50 mm; Designation of bearing:UC206G2L3; N1:21 mm; L1:56 mm; J:121 mm; C:19.5 kN; G:M6x1; B:38.1 mm; Designation of housing:PH206N-; Recommended tightening torque for set screw:5.5 Nm; |
| DODGE F2B-SC-104S-FF Flange Block Bearings | d:28.58 mm; C0:11.2 kN; Weight:0.93 kg; G:M6x1; S:18.2 mm; A5:18.2 mm; Designation of housing:C206-; d1:44.1 mm; Recommended tightening torque for set screw:8 Nm; B:36.4 mm; |
| DODGE FC-SC-111 Flange Block Bearings | N:M10; Weight:1.11 kg; S:18.2 mm; T max.:100 °C; L:85 mm; E:18 mm; s1:34.1 mm; H1:17 mm; A:48 mm; C0:11.2 kN; |
| 2.688 Inch | 68.275 Millimeter x 2.234 Inch | 56.744 Millimeter x 3 Inch | 76.2 Millimeter DODGE P2B-SC-211 Pillow Block Bearings | Brand:NTN; Max operating temperature, Tmax:120 °C; Fw:17 mm; Nlim (grease):15,000 rpm; Mass:0.0075 kg; Characteristic outer ring frequency, BPF0:7.6 Hz; b:13 mm; Characteristic rolling element frequency, BSF:9.4 Hz; Dw:2 mm; Characteristic cage frequency, FTF:0.45 Hz; Size (mm):2.688 Inch | 68.275 Millimeter x 2.234 Inch | 56.744 Millimeter x 3 Inch | 76.2 Millimeter ; |
| 1.688 Inch | 42.875 Millimeter x 2.67 Inch | 67.818 Millimeter x 2.125 Inch | 53.98 Millimeter DODGE EP2B-S2-111L Pillow Block Bearings | Designation of bearing:EX201G2L3; C:12.8 kN; d1:32.4 mm; d:12 mm; Dz:54 mm; Recommended tightening torque for set screw:5.5 Nm; Z:63.5 mm; H:31.8 mm; N1:17 mm; T max.:100 °C; Size (mm):1.688 Inch | 42.875 Millimeter x 2.67 Inch | 67.818 Millimeter x 2.125 Inch | 53.98 Millimeter ; |
| DODGE TP-30X18-TUFR Mounted Units & Inserts | F:112.5 mm; D:170 mm; B:43 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:9.84 Hz; Characteristic cage frequency, FTF:0.42 Hz; Nref:3,100 rpm; d:95 mm; Characteristic outer ring frequency, BPF0:7.16 Hz; Brand:SNR; |
| DODGE F4B-SCMAH-308 Flange Block Bearings | Enclosure:2 Metal Shields; Outer Race Width:0.433 Inch | 11 Mill; Da max:31 mm; Minimum Buy Quantity:N/A; Nlim (grease):19,000 rpm; d:15 mm; Maximum Capacity / Filling Slot:No; Max operating temperature, Tmax:120 °C; Snap Ring:No; Internal Special Features:No; |