| DODGE FC-IP-104R Flange Block Bearings | B:28 mm; Characteristic inner ring frequency, BPFI:6.42 Hz; da min:94 mm; Nlim (grease):4,200 rpm; Characteristic cage frequency, FTF:0.42 Hz; Fatigue limit load, Cu:2.7 kN; Characteristic outer ring frequency, BPF0:4.58 Hz; Characteristic rolling element frequency, BSF:5.78 Hz; d:85 mm; Mass:1.79 kg; |
| 1.5 Inch | 38.1 Millimeter x 1.719 Inch | 43.663 Millimeter x 2.125 Inch | 53.98 Millimeter DODGE P2B-SCMAH-108 Pillow Block Bearings | d:55.56 mm; S:27.8 mm; SW:4.76 mm; B:55.6 mm; Recommended tightening torque for set screw:16.8 Nm; G:3/8-24UNF; r:2; T max.:100 °C; T min.:-20 °C; m:9 mm; Size (mm):1.5 Inch | 38.1 Millimeter x 1.719 Inch | 43.663 Millimeter x 2.125 Inch | 53.98 Millimeter ; |
| DODGE INS-GT-20M-CR Insert Bearings Spherical OD | Weight:4.23 kg; H2:138 mm; C0:32.8 kN; E:25 mm; Designation of bearing:UC212G2T04; Designation of housing:PA212-; A1:36 mm; L1:52 mm; T min.:-40 °C; Recommended tightening torque for set screw:22 Nm; |
| 7.087 Inch | 180 Millimeter x 10.406 Inch | 264.312 Millimeter x 7.5 Inch | 190.5 Millimeter DODGE P4B236-USAF-180MTT Pillow Block Bearings | B:42.9 mm; S:17.5 mm; T min.:-20 °C; Designation of housing:FC207N-; C0:15.2 kN; Z:48.8 mm; Designation of closed end cover:SCC207; A1:9 mm; L:135 mm; e:11 mm; Size (mm):7.087 Inch | 180 Millimeter x 10.406 Inch | 264.312 Millimeter x 7.5 Inch | 190.5 Millimeter ; |
| DODGE WSTU-GTEZ-102-PCR Take Up Unit Bearings | Ball Grade:Class 24; Housing Material:Polymer; Retainer Material:Polymer; Shaft Attachment (2):Grip Tight; Housing Coating:No Coating; Housing Type:Wide Slot Take-Up; Flinger Material:Stainless Steel; Manufacturing Plant Location:Rogersville, TN; Expansion Type:Non-Expansion; Bearing Outer Ring Material:Steel; |
| DODGE S1U513-TAF-203 Mounted Units & Inserts | T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; C:31.85 kN; e:22 mm; B:49.2 mm; Designation of housing:FL209N-; Designation of bearing:UC209-27G2L3; Z:56.9 mm; J:148 mm; Designation of open end cover:SCOU209-27; |
| DODGE FB-GT-103 Flange Block Bearings | Mass:37.5 kg; D:620 mm; Radial clearance class:CN; Da max:607 mm; Fatigue limit load, Cu:10.8 kN; rs min:3 mm; Characteristic outer ring frequency, BPF0:11.18 Hz; Brand:NTN; Nlim (grease):820 rpm; ra max:2.5 mm; |
| DODGE WSTU-SCEZ-103-PCR Take Up Unit Bearings | T min.:-20 °C; G:R1/8"; B:22 mm; A1:10 mm; A:32 mm; C:9.55 kN; N:11,5mm; C0:4.78 kN; Designation of bearing:US202G2T20; H:112.5 mm; |
| DODGE INS-S2-207R Insert Bearings Spherical OD | Radius:1 mm; d:90 mm; D:140 mm; Dynamic Load Rating:39.7 kN; Oil Holes:2.5 mm; B:20 mm; Da:120 mm; da:104 mm; Static Load Rating:60.2 kN; |
| DODGE AN-GTM-11-200-D Mounted Units & Inserts | C0:6.65 kN; T max.:100 °C; S:12.7 mm; T min.:-20 °C; L1:40 mm; J:97 mm; H2:64 mm; B:31 mm; C:12.8 kN; A1:19 mm; |
| DODGE EF4B-IP-212LE Flange Block Bearings | Da max:139 mm; Max operating temperature, Tmax:110 °C; rs min:2.1 mm; da min:81 mm; Fatigue limit load, Cu:2.95 kN; B:35 mm; D:150 mm; Min operating temperature, Tmin:-25 °C; Nlim (grease):4,600 rpm; d:70 mm; |
| DODGE FC-GTM-55M Flange Block Bearings | G:M6x1; H1:13 mm; L:110 mm; T max.:100 °C; Designation of housing:PA207-; J:80 mm; L1:30 mm; S:17.5 mm; d:34.92 mm; C0:15.2 kN; |
| 1.25 Inch | 31.75 Millimeter x 1.531 Inch | 38.9 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE TB-SC-104 Pillow Block Bearings | e:16 mm; A1:14 mm; B1:44.3 mm; T min.:-20 °C; S:17.4 mm; d:25.4 mm; C0:7.88 kN; d1:37.4 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; Size (mm):1.25 Inch | 31.75 Millimeter x 1.531 Inch | 38.9 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| DODGE EF4B-IP-204R Flange Block Bearings | T max.:100 °C; A1:25 mm; Recommended tightening torque for set screw:27.1 Nm; S:34.2 mm; J:178 mm; B:68.3 mm; s1:64.35 mm; Designation of bearing:EX314-44G2T04; C:104.26 kN; N:25mm; |