| SMITH CR-1-5/8-SS Cam Follower and Track Roller - Stud Type | B:35 mm; closure type:Open; precision rating:ABEC 1 (ISO Cla; outer ring width:35 mm; finish/coating:Uncoated; maximum rpm:5500 RPM; fillet radius:2.1 mm; contact angle:40 °; series:7300; cage material:Brass; |
| SMITH MFCR-72 Cam Follower and Track Roller - Stud Type | Grease Reference Speed:9300 rpm; Bore Size d:35 mm; Features:Open; C0r - Static Load Rating:19.2 kN; Oil Reference Speed:13000 rpm; Clearance:C3; Weight:0.45 Kg; Outside Diameter D:80.000 mm; Outside Ring Width B:21.000 mm; Cr - Dynamic Load Rating:33.4 kN; |
| SMITH CR-1-3/4-XB Cam Follower and Track Roller - Stud Type | Z:64 mm; s1:30.5 mm; Dz:54 mm; d1:32.4 mm; A5:17 mm; L1:225 mm; Weight:1.69 kg; Designation of open end cover:SCOE204-20; B:34 mm; L:264 mm; |
| SMITH IRR-1-7/16 Needle Non Thrust Roller Bearings | Fatigue limit load, Cu:3.35 kN; a:10.4 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1; r1s min:1 mm; C:12 mm; Y2:2.11; rs min:1 mm; Characteristic inner ring frequency, BPFI:7.35 Hz; Da min:40 mm; |
| SMITH CR-1-3/8-B Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; Weight:1.076 lbs; harmonization code:3926904590.US; maximum shaft surface speed:12000 fpm; pressure tolerance:Ambient; shaft diameter:1.7500 in; width:0.6250 in; D:2.7970 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; |
| SMITH CR-3 Cam Follower and Track Roller - Stud Type | Z:42.9 mm; G:M6x1; A:30 mm; T max.:200 °C; Designation of open end cover:SCOU203-11; L1:38 mm; s1:11 mm; Dz:46 mm; Weight:0.44 kg; B:22 mm; |
| SMITH CR-1-7/8-XBE Cam Follower and Track Roller - Stud Type | radial static load capacity:26000 lb; base width:2.19 in; duty type:Heavy Duty; base to bore centerline:2.3750 in; locking device:Concentric Collar; bore type:Round; expansion type:Expansion Bearing &#; overall length:8.0000 in; finish/coating:Black Oxide; housing construction:Split Pillow Block; |
| SMITH PYR-3-1/2 Cam Follower and Track Roller - Yoke Type | axial static load capacity:147700 lb; axial dynamic load capacity:41970 lb; B:1.0000 in; fillet radius:0.08 in; bearing material:Steel; radial static load capacity:59100 lb; operating temperature range:-65 to +250 &de; standards met:AISI 52100; closure type:Open; D:37.0000 in; |
| SMITH CR-11/16-XC Cam Follower and Track Roller - Stud Type | Brand:SNR; da max:10.7 mm; D:22 mm; d:8 mm; D1:18 mm; ra max:0.3 mm; f0:12.4; Nref:32,000 rpm; Static load, C0:1.37 kN; d1:10.7 mm; |
| SMITH PYR-6 Cam Follower and Track Roller - Yoke Type | Radial clearance class:CN; Characteristic cage frequency, FTF:0.41 Hz; Brand:SNR; Static load, C0:5.9 kN; Nref:15,000 rpm; rs min:0.6 mm; D:47 mm; Dynamic load, C:9.9 kN; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:4.12 Hz; |
| SMITH HR-1/2-X Cam Follower and Track Roller - Stud Type | manufacturer upc number:793699130386; seal type:Contact Seal; d:2.9375 in; housing material:Cast Iron; series:200; mounting type:Four-Bolt Flange; duty type:Standard Duty; locking device:Set Screw; |
| SMITH DCR-1-1/4 Cam Follower and Track Roller - Stud Type | d1:146 mm; A3:4 mm; C0:140 kN; SW:9.52 mm; H:260 mm; G:M10x1; Recommended tightening torque for set screw:65.2 Nm; T max.:200 °C; Designation of bearing:EX320-64G2T20; A5:50 mm; |
| SMITH DYR-1-1/8 Cam Follower and Track Roller - Yoke Type | B:45.3 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; S:11.8 mm; A:60 mm; G:M6x1; Designation of bearing:US211-32G2; T min.:-20 °C; A1:39.5 mm; s1:22.65 mm; |
| SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type | maximum rpm:5000 rpm; B:0.8750 in; cage material:Steel; series:RS - Multi-Rol; static load capacity:11500 lbs; operating temperature range:-20F to 250 °F; bearing material:Chrome Steel; flanges:No Flange; standards met:ABMA, ISO; precision rating:Not Rated; |