| No. | Brand | C | R | F | H | J | b | S | a |
| MYR-25-SC | SMITH | 52.5 kN | - | - | - | - | - | 25.4 mm | - |
| MPYR-62 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC-SS | SMITH | - | - | - | - | 171 mm | - | 27.7 mm | - |
| HR-3-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| MYR-40-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBE | SMITH | 43.55 kN | - | - | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-X | SMITH | - | - | 153.5 mm | - | - | - | - | - |
| MYRV-5 | SMITH | - | - | - | - | - | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
| CR-11/16-XC | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |
| SMITH CR-1-3/4-X Cam Follower and Track Roller - Stud Type | radial static load capacity:144800 lb; maximum rpm:1850 RPM; finish/coating:Powder Coated; series:9000; radial dynamic load capacity:140400 lb; expansion type:Non-Expansion Bearin; seal type:Clearance/Non-C; inner ring width:5-13/32 in; housing width:4-1/4 in; D:8-3/4 in; |
| SMITH IRR-13/16 Needle Non Thrust Roller Bearings | D:2-3/16 in; series:TTSP; thrust bearing type:Tapered Race; B:5/8 in; operating temperature range:-65 to +250 &de; d:1.26 in; fillet radius:0.03 in; |
| SMITH MPCR-40 Cam Follower and Track Roller - Stud Type | thread size:M 190x3; series:AH; compatible shaft diameter:170 mm; manufacturer upc number:7316570136128; lock nut number:KM34; taper:1:12; overall length:122 mm; lock washer number:MB34; |
| SMITH DYR-1-1/8 Cam Follower and Track Roller - Yoke Type | B:45.3 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; S:11.8 mm; A:60 mm; G:M6x1; Designation of bearing:US211-32G2; T min.:-20 °C; A1:39.5 mm; s1:22.65 mm; |
| SMITH YAF-20 Cam Follower and Track Roller - Yoke Type | d:65 mm; T min.:-40 °C; s1:57.6 mm; Weight:6.9 kg; N1:28 mm; A:65 mm; Designation of housing:PE213N-; C0:40 kN; Designation of open end cover:SCOE213-65; C:57.2 kN; |
| SMITH MCR-90 Cam Follower and Track Roller - Stud Type | flange mounting type:Four-Bolt Piloted; seal type:Triple Barrier Seal; bolt size:0.4375 in; finish/coating:E-coat; manufacturer upc number:053893778464; operating temperature range:-30 to +180 &de; series:E-PF-TRB; pilot diameter:4.2500 in; lubrication type:Lubrication Fitting; B:6.1250 in; |
| SMITH CR-1/2-XC Cam Follower and Track Roller - Stud Type | assembly type:Cone & Cup; cage material:Steel; manufacturer upc number:053893253251; abma precision rating:Class K; cone width:38 mm; operating temperature range:-65 to +250 &de; cup width:29 mm; flange type:Non-Flanged Cup; finish/coating:Uncoated; d:110 mm; |
| SMITH MYR-20-C Cam Follower and Track Roller - Yoke Type | S:8.5 mm; J:82.6 mm; C:25.7 kN; N:M10; L1:22.5 mm; Designation of bearing:US207G2T04; Dz:80 mm; C0:15.2 kN; A:45 mm; B:32 mm; |
| SMITH MYRV-15-C Cam Follower and Track Roller - Yoke Type | bore type:Straight; d:200 mm; lubrication hole type:No Holes; fillet radius:4 mm; outer ring width:165 mm; cage material:Brass; internal clearance:C0; outer ring type:Not Split; series:233; static load capacity:3600000 N; |
| SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type | cage material:No Cage; internal clearance:C0; standards met:SAE-AS7949, AISI 521; inner ring width:7.54 mm; outer ring width:6.86 mm; series:KSP; B:0.2970 in; d:0.1900 in; finish/coating:Cadmium Plated; bearing material:Steel; |
| SMITH HR-1-7/8-XC Cam Follower and Track Roller - Stud Type | A1:42 mm; d:38.1 mm; Designation of housing:P308-; B:41.3 mm; s1:41.25 mm; G:M6x1; L1:60 mm; J:170 mm; N1:27 mm; C0:24 kN; |
| SMITH HR-2-1/2-B Cam Follower and Track Roller - Stud Type | outer ring width:1-15/16 in; finish/coating:Uncoated; row type & fill slot:Double-Row Non-Fill; cage material:Steel; series:5200; fillet radius:2 mm; precision rating:Not Rated; maximum rpm:2560 RPM; D:150 mm; internal clearance:C0; |
| SMITH CR-1-X-SS Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; maximum shaft surface speed:12000 fpm; continuous temperature range:-22 to 400°F; misalignment tolerance:0.010 in; lip material:Labyrinth; D:5.1180 in; manufacturer catalog number:29609-5110; pressure tolerance:Ambient; harmonization code:8487900040.US; typical application:Exceptional Bearing; |
SMITH CR-2-1/4-B Cam Follower and Track Roller - Stud Type Video