| No. | Brand | C | R | F | H | J | b | S | a |
| MCRV-47-BC | SMITH | - | - | - | - | 184 mm | - | - | - |
| MCR-72 | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| MYR-15 | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| MPCR-35 | SMITH | - | - | - | - | - | - | - | - |
| MCR-85-SBC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62-SBC | SMITH | - | - | - | 55.6 mm | 164 mm | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-XC | SMITH | 19 mm | - | - | - | - | - | 18.2 mm | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| MVCR-76 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-B | SMITH | 31.85 kN | - | - | - | - | - | - | - |
| YAG-28 | SMITH | 14 kN | - | - | - | - | - | - | - |
| BCR-1-1/8-BC | SMITH | - | - | - | - | - | - | - | - |
| YR-3-1/4-C | SMITH | 113.36 kN | - | - | 190 mm | - | - | - | - |
| YAG-12 | SMITH | 12.8 kN | - | - | - | 78 mm | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| SMITH YR-1-3/8 Cam Follower and Track Roller - Yoke Type | series:70P; maximum p value:24.5;Static 137; thickness:1.5 mm; operating temperature range:-40 to +248 &de; standards met:RoHS; material:Multi-layer Oil-Impr; additional details:Lead Free; material specification:Drymet ST; maximum pv value:3.25 N/mm2 x m&; overall length:470 mm; |
| SMITH HR-2-1/2-B Cam Follower and Track Roller - Stud Type | outer ring width:1-15/16 in; finish/coating:Uncoated; row type & fill slot:Double-Row Non-Fill; cage material:Steel; series:5200; fillet radius:2 mm; precision rating:Not Rated; maximum rpm:2560 RPM; D:150 mm; internal clearance:C0; |
| SMITH HR-1-7/8-XC Cam Follower and Track Roller - Stud Type | A1:42 mm; d:38.1 mm; Designation of housing:P308-; B:41.3 mm; s1:41.25 mm; G:M6x1; L1:60 mm; J:170 mm; N1:27 mm; C0:24 kN; |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |
| SMITH HR-3/4-C Cam Follower and Track Roller - Stud Type | B:9 mm; D:37 mm; cage material:Phenolic; closure type:Open; d:20 mm; manufacturer upc number:029176726729; |
| SMITH CR-1-5/8-B Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.41 Hz; Keyword String:Ball; rs min:1.5 mm; Internal Clearance:C0-Medium; UNSPSC:31171504; Dynamic load, C:52.5 kN; Static load, C0:36 kN; Inner Race Width:0 Inch | 0 Millimete; Enclosure:Open; |
| SMITH MCR-80-S Cam Follower and Track Roller - Stud Type | type:Stepped; material:Steel; length:24 in; |
| SMITH MCRV-85-C Cam Follower and Track Roller - Stud Type | head diameter:1.7500 in; lubrication:Grease; operating temperature range:Max 350°; axial static load capacity:1130 lb; series:TM; ball material:Alloy Steel - heat t; shank thread size:3/4-16; lubrication type:With Lubrication Fit; housing material:Carbon Steel - corro; misalignment angle:7 °; |
| SMITH DCR-1-1/4 Cam Follower and Track Roller - Stud Type | d1:146 mm; A3:4 mm; C0:140 kN; SW:9.52 mm; H:260 mm; G:M10x1; Recommended tightening torque for set screw:65.2 Nm; T max.:200 °C; Designation of bearing:EX320-64G2T20; A5:50 mm; |
| SMITH DYR-6 Cam Follower and Track Roller - Yoke Type | compatible bore diameter:3 in, 2-11/16 i; material:Steel; end cap type:Closed End Cap; |
| SMITH MYR-50-C Cam Follower and Track Roller - Yoke Type | Series:15000; C - Cup Width:15.875 mm; B - Cone Width:20.638 mm; a - Effective Center Location3:-5.8 mm; Da - Cup Frontface Backing Diameter:59.44 mm; G1 - Heat Generation Factor (Roller-Raceway):14.6; e - ISO Factor8:0.35; Y - ISO Factor9:1.71; D:63.500 mm; da - Cone Frontface Backing Diameter:31.5 mm; |
| SMITH BCR-5/8 Cam Follower and Track Roller - Stud Type | Dynamic load, C:2,200 kN; D1:312.9 mm; Nref:1,200 rpm; Nlim:1,800 rpm; Radial clearance class:C4; da min:187 mm; Fatigue limit load, Cu:175 kN; b:20.3 mm; ra max:3 mm; d2:236 mm; |
| SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type | maximum rpm:5000 rpm; B:0.8750 in; cage material:Steel; series:RS - Multi-Rol; static load capacity:11500 lbs; operating temperature range:-20F to 250 °F; bearing material:Chrome Steel; flanges:No Flange; standards met:ABMA, ISO; precision rating:Not Rated; |
| SMITH MPYR-200 Cam Follower and Track Roller - Yoke Type | lubrication type:Lubrication Fitting; radial static load capacity:21000 lb; manufacturer catalog number:072387; expansion type:Non-Expansion Bearin; bearing type:Spherical Roller; B:4.6200 in; seal type:Triple Lip with Flin; finish/coating:Uncoated; bore type:Round; D:3.5400 in; |
SMITH BEARING BCR-1-1/8-BC Cam Follower and Track Roller
Specifications ; Roller Diameter, 1.125 Inch | 28.575 Millimeter ; Profile, Stud Type ; Roller Surface Profile, Crowned ; Stud Profile, Standard Stud ; Hex Socket ...Other Features: Self LubricatingRoller Width: 0.625 Inch | 15.875 MillimeterSeal Type: OpenThread Size: 7/16-20
Non-Metallic Bushing Cam Follower, BCR-1-7/8-BC - Zoro Tools
Order Smith Bearing Non-Metallic Bushing Cam Follower, BCR-1-7/8-BC, BCR-1-7/8-BC at Zoro.com. Great prices & free shipping on orders over $50 when you sign ...
BCR-1-1/8-BC Cam Followers - Lily Bearing - 养贞轴承
LILY Part No. LBCR-11/8-BC. Cross Reference, Smith. System of Measurement, Inch. Roller style, Stud Type. Roller Dia, 1.125".
BCR-1-1/8-BC - Detail - Manufacturer of Smith Bearing Cam ...
SMITH Bearing® Number, BCR-11/8-BC. (P) Lube Fitting Size, 3/16. (H) Oil Hole Dia. 3/32. (N) Oil Hole Location, 1/4. Recom. Bore .4375.
BCR-1-1/8 Cam Followers - Smith & Lily Interchange | Lily Bearing
Lily BCR-1-1/8 Cam Followers, Smith Part No. BCR-1-1/8, LILY Part No. LBCR-1-1/8, System of Measurement Inch, Roller Dia 1.125", Stud Roller Dia 1.125", ...
BCR-1-1/8-BC Smith Bearing - Distributors and Price Comparison ...
Non-Metallic Bushing Cam Follower, BCR-1-1/8-BC. USD 25.250. Add to BOM. Watch. Price & Stock. Smith Bearing BCR-1-1/8-BC pricing and available inventory.
Smith Bearing Stud Mounted Cam Follower BCR-1-1/8-BC at ...
BCR-1-1/8-BC, Smith Bearing Stud Mount Cam Follower Bearing ; Shipping: Calculated at Checkout ; Pillow Block Bearings; Cam Followers ; Extra Information. Weight:.
SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type Video