| No. | Brand | C | R | F | H | J | b | S | a |
| IRR-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MCR-30-C | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-11/16-XC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| MYR-20-C | SMITH | 25.7 kN | - | - | - | 82.6 mm | - | 8.5 mm | - |
| MUTD-45100 | SMITH | - | 500 mm | - | - | - | - | - | - |
| CR-1-1/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-C | SMITH | - | - | - | - | - | - | - | - |
| MYRV-5 | SMITH | - | - | - | - | - | - | - | - |
| MCR-47-B | SMITH | - | - | - | - | 132 mm | - | 21.4 mm | - |
| BCR-1-5/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
| PCR-2-1/4-E | SMITH | - | - | - | 102 mm | 78 mm | - | 12.7 mm | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-XBE | SMITH | - | - | - | - | - | - | - | - |
| MFYR-80 | SMITH | - | - | - | - | - | - | - | - |
| YAG-28 | SMITH | 14 kN | - | - | - | - | - | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-C | SMITH | 52.5 kN | - | - | - | - | - | - | - |
| SMITH MCR-72 Cam Follower and Track Roller - Stud Type | Fatigue limit load, Cu:0.34 kN; Dynamic load, C:12.5 kN; da min:32 mm; Radial clearance class:C3; Min operating temperature, Tmin:-25 °C; ra max:0.6 mm; Da max:48 mm; Mass:0.1 kg; Characteristic cage frequency, FTF:0.41 Hz; Static load, C0:7.4 kN; |
| SMITH IRR-1-7/16 Needle Non Thrust Roller Bearings | Fatigue limit load, Cu:3.35 kN; a:10.4 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1; r1s min:1 mm; C:12 mm; Y2:2.11; rs min:1 mm; Characteristic inner ring frequency, BPFI:7.35 Hz; Da min:40 mm; |
| SMITH CR-2-1/4-B Cam Follower and Track Roller - Stud Type | manufacturer catalog number:701903; bore type:Round; replacement bearing:AR-2-23; locking device:Set Screw; base width:3.1250 in; bolt size:.7500 in; operating temperature range:Max 250°; base to bore centerline:2.7500 in; finish/coating:Uncoated; mounting:Two-Bolt Base; |
| SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
| SMITH DYR-1-1/8 Cam Follower and Track Roller - Yoke Type | B:45.3 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; S:11.8 mm; A:60 mm; G:M6x1; Designation of bearing:US211-32G2; T min.:-20 °C; A1:39.5 mm; s1:22.65 mm; |
| SMITH MCRV-80-SBC Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:22200; overall height:5-1/4 in; D:35 in; series:22200; compatible bore diameter:1-15/16 in; base width:4-1/2 in; travel:18 in; frame type:One-Piece Saddle Mou; bolt center-to-center width:2-1/2 in; overall length:37 in; |
| SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type | cage material:No Cage; internal clearance:C0; standards met:SAE-AS7949, AISI 521; inner ring width:7.54 mm; outer ring width:6.86 mm; series:KSP; B:0.2970 in; d:0.1900 in; finish/coating:Cadmium Plated; bearing material:Steel; |
| SMITH MYR-30 Cam Follower and Track Roller - Yoke Type | cage material:Polyamide; radial dynamic load capacity:2300 lbf; d:15 mm; D:35 mm; series:7200; standards met:DIN 628-1; outer ring width:11 mm; radial static load capacity:1200 lbf; finish/coating:Uncoated; internal clearance:C0; |
| SMITH MVCR-76 Cam Follower and Track Roller - Stud Type | Y2 - Geometry Factor:4.31; Dimension A:4.00 in; Dimension R:0.32 in; Shaft Size Type:Metric; Shaft Tolerance:0.0030 in; UPC Code:0883450093620; Housing Style:Four-Bolt Pillow Blo; Eng Internal Radial Clearance - Max:0.0039; Dimension H:1.50 in; Grease Lubrication - M/N Seal:1400 rpm; |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH CR-3/4-C Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:10; finish/coating:Uncoated; travel:12 in; series:TP; |
| SMITH CR-2-1/4-XBE Cam Follower and Track Roller - Stud Type | Designation of closed end cover:SCC211; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; Z:62.8 mm; Designation of bearing:UC211-35G2; Weight:3.44 kg; C0:29.2 kN; A1:18 mm; T max.:100 °C; C:43.55 kN; |
| SMITH VYR-8-1/2 Cam Follower and Track Roller - Yoke Type | L:2.323 in; Threads No. per Inch:12; d:3.543 in; A:3.950 in; Taper:1:12; G:0.413 in; Major Dia - B:4.325 in; F:0.115 in; Weight:2.00 lb; |
MCR-26-SB Caged Stud Type Hex Head slot Sealed ...
The MCR-26-SB is produced by Smith Bearings and is described as a MCR-26-SB Caged Stud Type Hex Head slot Sealed Crowned Metric Needle Bearing Cam Follower.
Smith Bearing Stud Mounted Cam Follower MCR-26-SB at ...
Find Stud Mounted Cam Followers MCR-26-SB by Smith Bearing at Mechanidrive. Reliable bearing experts at your fingertips. Lowest prices & a huge stock of Cam ...
Detail - Smith Bearing
MCR-26-SB ; (C) Roller Width (mm), 12 ; (d) Stud Dia. (mm), 10 ; (B1) Stud Length (mm), 23 ; (C) Basic Dynamic Load Rating (newtons), 5700.
Metric Need Bearing Cam Follower, MCR-26-SB - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCR-26-SB, MCR-26-SB at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or ...
Smith Bearing | MCR-26-SB | Metric Needle Bearing Cam Follower ...
Smith Bearing MCR-26-SB. Metric Needle Bearing Cam Follower Caged Stud Type Hex Head slot Sealed Crowned. Item #106325665. $90.80 each. Shipment Options.
MCR-26-SB Smith Bearing - Tools and Supplies - Distributors and ...
Find the best pricing for Smith Bearing MCR-26-SB by comparing bulk discounts from 2 distributors. Octopart is the world's source for MCR-26-SB availability ...
SMI MCR 26 SB - Cam Follower and Track Roller - BDI ...
26MM Roller Diameter; 12MM Roller Width; Crowned Roller Surface Profile; 10MM Stud Diameter; M10X1 Thread Size; Standard Stud Stud Profile; Sealed Enclosure ...
SMITH MCR-26-SB Cam Follower and Track Roller - Stud Type Video