| SMITH DYR-1-1/8 Cam Follower and Track Roller - Yoke Type | B:45.3 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; S:11.8 mm; A:60 mm; G:M6x1; Designation of bearing:US211-32G2; T min.:-20 °C; A1:39.5 mm; s1:22.65 mm; |
| SMITH PYR-6 Cam Follower and Track Roller - Yoke Type | Radial clearance class:CN; Characteristic cage frequency, FTF:0.41 Hz; Brand:SNR; Static load, C0:5.9 kN; Nref:15,000 rpm; rs min:0.6 mm; D:47 mm; Dynamic load, C:9.9 kN; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:4.12 Hz; |
| SMITH CR-1-1/4-C-SS Cam Follower and Track Roller - Stud Type | B:1.5000 in; D:2.0000 in; manufacturer catalog number:716107; overall length:3.1250 in; finish/coating:Uncoated; locking device:Set Screw; duty type:Normal Duty; replacement bearing:2-012C RM; d:0.7500 in; base to bore centerline:1.3125 in; |
| SMITH CR-1-5/8-B Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.41 Hz; Keyword String:Ball; rs min:1.5 mm; Internal Clearance:C0-Medium; UNSPSC:31171504; Dynamic load, C:52.5 kN; Static load, C0:36 kN; Inner Race Width:0 Inch | 0 Millimete; Enclosure:Open; |
| SMITH CR-9/16-XBE Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):8110; Cone Part Number:M272749; Cg - Geometry Factor:0.26; Db - Cup Backface Backing Diameter:632.97 mm; Ab - Cage-Cone Frontface Clearance:10.4 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:839000 lbf; Design Units:Imperial; e - ISO Factor8:0.33; Cage Type:Pin-Type; R - Cone Backface To Clear Radius1:6.35 mm; |
| SMITH MCRV-62 Cam Follower and Track Roller - Stud Type | overall length:73 mm; compatible shaft diameter:135 mm; compatible bearing number:23028; thread size:M150x2 mm; taper:1:12; series:AH(X)30; |
| SMITH MCRV-26 Cam Follower and Track Roller - Stud Type | A:32.5 mm; s1:30.9 mm; T max.:200 °C; B:34.8 mm; T min.:-20 °C; S:17.4 mm; B1:44.3 mm; Weight:0.75 kg; J:99 mm; d:22.22 mm; |
| SMITH MYRV-25-C Cam Follower and Track Roller - Yoke Type | B:0.3125 in; standards met:AISI 52100; axial dynamic load capacity:2560 lb; radial static load capacity:3170 lb; bearing material:Steel; precision rating:ABEC 1 (ISO Cla; internal clearance:C0; axial static load capacity:7920 lb; finish/coating:Uncoated; inside diameter:7.5000 in; |
| SMITH CR-2-XC-SS Cam Follower and Track Roller - Stud Type | J:171 mm; d1:74.5 mm; N1:25 mm; S:27.7 mm; Designation of bearing:EX211G2T04; Designation of open end cover:SCOE211-55; H2:126 mm; B:55.4 mm; G:M6x1; Designation of housing:P211N-; |
| SMITH YR-1-3/8 Cam Follower and Track Roller - Yoke Type | series:70P; maximum p value:24.5;Static 137; thickness:1.5 mm; operating temperature range:-40 to +248 &de; standards met:RoHS; material:Multi-layer Oil-Impr; additional details:Lead Free; material specification:Drymet ST; maximum pv value:3.25 N/mm2 x m&; overall length:470 mm; |
| SMITH CR-11/16-XC Cam Follower and Track Roller - Stud Type | Brand:SNR; da max:10.7 mm; D:22 mm; d:8 mm; D1:18 mm; ra max:0.3 mm; f0:12.4; Nref:32,000 rpm; Static load, C0:1.37 kN; d1:10.7 mm; |
| SMITH MCR-72 Cam Follower and Track Roller - Stud Type | Fatigue limit load, Cu:0.34 kN; Dynamic load, C:12.5 kN; da min:32 mm; Radial clearance class:C3; Min operating temperature, Tmin:-25 °C; ra max:0.6 mm; Da max:48 mm; Mass:0.1 kg; Characteristic cage frequency, FTF:0.41 Hz; Static load, C0:7.4 kN; |
| SMITH MYRV-15-C Cam Follower and Track Roller - Yoke Type | bore type:Straight; d:200 mm; lubrication hole type:No Holes; fillet radius:4 mm; outer ring width:165 mm; cage material:Brass; internal clearance:C0; outer ring type:Not Split; series:233; static load capacity:3600000 N; |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |