| No. | Brand | C | R | F | H | J | b | S | a |
| MYR-25-SC | SMITH | 52.5 kN | - | - | - | - | - | 25.4 mm | - |
| HR-1-3/4-XBC | SMITH | 31.85 kN | - | - | 180 mm | 148.5 mm | - | - | - |
| MCR-30-C | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| IRR-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MCR-90-C | SMITH | 122.85 kN | - | - | - | - | - | 40.5 mm | - |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-BC | SMITH | - | - | - | - | 184 mm | - | - | - |
| MCR-47-B | SMITH | - | - | - | - | 132 mm | - | 21.4 mm | - |
| PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8-XC | SMITH | - | - | - | - | 170 mm | - | - | - |
| CR-3 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-B | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/8 | SMITH | - | - | - | 72 mm | - | - | - | - |
| CR-2-1/2-XC | SMITH | 19 mm | - | - | - | - | - | 18.2 mm | - |
| MCRV-52-S | SMITH | - | - | - | - | - | - | - | - |
| PCR-2-1/4-E | SMITH | - | - | - | 102 mm | 78 mm | - | 12.7 mm | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| BCR-7/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| MYR-40-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-B | SMITH | 31.85 kN | - | - | - | - | - | - | - |
| SMITH CR-1-3/4-C Cam Follower and Track Roller - Stud Type | Dimension F:10.88 in; Housing Style:Two-Bolt Pillow Bloc; Float:0.083 in; Oil Lubrication - T Seal:2900 rpm; Eng Internal Radial Clearance - Min:0.0030; Oil Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Dimension H:1.25 in; Dimension J (Bolt Size):0.625 in; Shaft Size :2-7/16 in; |
| SMITH MCR-40-S Cam Follower and Track Roller - Stud Type | G:R1/8"; T min.:-40 °C; s1:21.45 mm; T max.:100 °C; A:33.7 mm; C:25.7 kN; B:42.9 mm; d:34.92 mm; Designation of bearing:UC207-22G2T04; Dz:80 mm; |
| SMITH MCRV-72-BC Cam Follower and Track Roller - Stud Type | L:197.5 mm; C:31.85 kN; H2:106.4 mm; B:42.8 mm; d:44.45 mm; C0:20.8 kN; B1:56.3 mm; Weight:2.57 kg; Designation of bearing:EX209-28G2L4; H:52.4 mm; |
| SMITH MCR-85-SBC Cam Follower and Track Roller - Stud Type | head type:Slotted; roller diameter:2.5000 in; thread size:1-14; roller material:Steel; roller width:1.5000 in; stud diameter:1.0000 in; roller shape:Flat; stud type:Standard; closure type:Sealed; stud length:2.2500 in; |
| SMITH CR-5/8-X-SS Cam Follower and Track Roller - Stud Type | assembly type:Double Row; double outer ring width:3.000 in; manufacturer upc number:053893533063; D:10.0000 in; bearing material:Steel; cup width:3.0000 in; abma precision rating:Class 2; d:6.5000 in; cone width:1.8125 in; |
| SMITH PYR-3-1/2 Cam Follower and Track Roller - Yoke Type | axial static load capacity:147700 lb; axial dynamic load capacity:41970 lb; B:1.0000 in; fillet radius:0.08 in; bearing material:Steel; radial static load capacity:59100 lb; operating temperature range:-65 to +250 &de; standards met:AISI 52100; closure type:Open; D:37.0000 in; |
| SMITH MCR-90-C Cam Follower and Track Roller - Stud Type | C:122.85 kN; S:40.5 mm; A5:40.5 mm; Designation of bearing:EX316G2L3; Recommended tightening torque for set screw:64 Nm; C0:86.5 kN; G:M10x1; s1:72.3 mm; SW:8 mm; T max.:100 °C; |
| SMITH CR-1/2-A-XBC Cam Follower and Track Roller - Stud Type | D:150 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Da max:139 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; d1:95.1 mm; Fatigue limit load, Cu:2.95 kN; da min:71 mm; d:60 mm; ra max:2 mm; Mass:2.87 kg; |
| SMITH HR-2-1/2-B Cam Follower and Track Roller - Stud Type | outer ring width:1-15/16 in; finish/coating:Uncoated; row type & fill slot:Double-Row Non-Fill; cage material:Steel; series:5200; fillet radius:2 mm; precision rating:Not Rated; maximum rpm:2560 RPM; D:150 mm; internal clearance:C0; |
| SMITH CR-1/2-XC Cam Follower and Track Roller - Stud Type | assembly type:Cone & Cup; cage material:Steel; manufacturer upc number:053893253251; abma precision rating:Class K; cone width:38 mm; operating temperature range:-65 to +250 &de; cup width:29 mm; flange type:Non-Flanged Cup; finish/coating:Uncoated; d:110 mm; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
| SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type | housing material:Cast Iron; bore type:Round; base width:2-1/4 in; mounting:Two-Bolt Base; locking device:Set Screw; d:1.2500 in; series:UCEP200; radial dynamic load capacity:5820 lbf; duty type:Normal Duty; B:2-1/4 in; |
| SMITH VCR-4-1/2-E Cam Follower and Track Roller - Stud Type | expansion type:Non-Expansion Bearin; d:30 mm; D:2.4409 in; B:38.10 mm; bore type:Round; seal type:Single Lip Contact; series:ER; bearing material:52100/Black Oxi; cage material:Brass; radial dynamic load capacity:4381 lb; |
| SMITH MFYR-80 Cam Follower and Track Roller - Yoke Type | Support Type:Four-Bolt Plummer Bl; Bearing Type:Split Cylindrical Re; Series Type:Light Series; Bearing - Housing - Seal:LSE1200BRHKPS; Dimension H2:27.0 in; Bearing - Housing - Seal UPC:013992095428; Ca - Axial Load Rating:17580 lbf; Dimension L:32.0 in; Dimension H:13.504 in; Dimension H1:2.0 in; |
SMITH IRR-1/2 Needle Non Thrust Roller Bearings Video