| No. | Brand | C | R | F | H | J | b | S | a |
| MCR-72-SC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-S | SMITH | - | - | - | - | - | - | - | - |
| YAG-12 | SMITH | 12.8 kN | - | - | - | 78 mm | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-5/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-XBE | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| YAG-28 | SMITH | 14 kN | - | - | - | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-C | SMITH | - | - | - | - | - | - | - | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| DYR-1-1/8 | SMITH | - | - | - | - | - | - | 11.8 mm | - |
| BCR-3/4-B | SMITH | - | - | - | - | - | - | - | - |
| HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| PCR-4-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26 | SMITH | - | - | - | - | 99 mm | - | 17.4 mm | - |
| CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| VYR-8-1/2 | SMITH | - | - | 0.115 in | - | - | - | - | - |
| CR-1-3/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| MPCR-40 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2-B | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-3/4-X Cam Follower and Track Roller - Stud Type | Weight:176.2 lb; D - Bearing O.D.:50.5000 in; Bearing Type:Thrust Tapered Rolle; d - Bore Diameter:45.7500 in; B:2.0625 in; Bearing Configuration:Thrust TTHD - with c; Static Load Rating:4280000 lbf; R - Fillet Radius Shaft (Max):0.13 in; Dynamic Load Rating:139000 lbf; r - Fillet Radius Housing (Max):0.13 in; |
| SMITH MCR-90-C Cam Follower and Track Roller - Stud Type | C:122.85 kN; S:40.5 mm; A5:40.5 mm; Designation of bearing:EX316G2L3; Recommended tightening torque for set screw:64 Nm; C0:86.5 kN; G:M10x1; s1:72.3 mm; SW:8 mm; T max.:100 °C; |
| SMITH MCR-90 Cam Follower and Track Roller - Stud Type | flange mounting type:Four-Bolt Piloted; seal type:Triple Barrier Seal; bolt size:0.4375 in; finish/coating:E-coat; manufacturer upc number:053893778464; operating temperature range:-30 to +180 &de; series:E-PF-TRB; pilot diameter:4.2500 in; lubrication type:Lubrication Fitting; B:6.1250 in; |
| SMITH CR-1-1/4-C-SS Cam Follower and Track Roller - Stud Type | B:1.5000 in; D:2.0000 in; manufacturer catalog number:716107; overall length:3.1250 in; finish/coating:Uncoated; locking device:Set Screw; duty type:Normal Duty; replacement bearing:2-012C RM; d:0.7500 in; base to bore centerline:1.3125 in; |
| SMITH CR-2-XC Cam Follower and Track Roller - Stud Type | radial static load capacity:1080 lbf; seal type:Contact Seal; mounting type:Two-Bolt Flange; bore type:Round; housing material:Malleable Iron - Nic; d:1.2500 in; length through bore:0.866 in; D:3.9375 in; series:BLCTE200NP; radial dynamic load capacity:2150 lbf; |
| SMITH PYR-6 Cam Follower and Track Roller - Yoke Type | Radial clearance class:CN; Characteristic cage frequency, FTF:0.41 Hz; Brand:SNR; Static load, C0:5.9 kN; Nref:15,000 rpm; rs min:0.6 mm; D:47 mm; Dynamic load, C:9.9 kN; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:4.12 Hz; |
| SMITH HR-1-7/8-XC Cam Follower and Track Roller - Stud Type | A1:42 mm; d:38.1 mm; Designation of housing:P308-; B:41.3 mm; s1:41.25 mm; G:M6x1; L1:60 mm; J:170 mm; N1:27 mm; C0:24 kN; |
| SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type | cage material:No Cage; internal clearance:C0; standards met:SAE-AS7949, AISI 521; inner ring width:7.54 mm; outer ring width:6.86 mm; series:KSP; B:0.2970 in; d:0.1900 in; finish/coating:Cadmium Plated; bearing material:Steel; |
| SMITH HR-1-1/2-C Cam Follower and Track Roller - Stud Type | Dimension G:3.410 in; Dimension RV:0.23 in; Eng Internal Radial Clearance - Min:0.0043; Dimension B:7.69 in; Y2 - Geometry Factor:4.29; Dimension C:4.9 in; Shaft Tolerance:0.0030 in; Dimension D Min:9.38 in; Grease Lubrication - B/C/O Seal:950 rpm; Float:0.083 in; |
| SMITH MCRV-85-C Cam Follower and Track Roller - Stud Type | head diameter:1.7500 in; lubrication:Grease; operating temperature range:Max 350°; axial static load capacity:1130 lb; series:TM; ball material:Alloy Steel - heat t; shank thread size:3/4-16; lubrication type:With Lubrication Fit; housing material:Carbon Steel - corro; misalignment angle:7 °; |
| SMITH DYR-6 Cam Follower and Track Roller - Yoke Type | compatible bore diameter:3 in, 2-11/16 i; material:Steel; end cap type:Closed End Cap; |
| SMITH CR-1-1/2-XB Cam Follower and Track Roller - Stud Type | H1:112.0 mm; Housing Mass:14 Kg; Material :Cast Iron; L:345.00 mm; A1:100 mm; Shaft Diameter d:2 11/16 in; Bolt Qty:2; Seal Type:V-ring; C0 Static Load Rating:363; Adapter Sleeve1:HA316; |
| SMITH BCR-1/2-C Cam Follower and Track Roller - Stud Type | Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:M06288; |
| SMITH CR-1/2-C Cam Follower and Track Roller - Stud Type | manufacturer upc number:087796026346; lubrication hole type:Lubrication Groove &; bearing material:Chrome Steel; D:150 mm; bore type:Straight; d:70 mm; outer ring type:Not Split; finish/coating:Uncoated; cage material:Steel Cage; B:51 mm; |
SMITH NUKR-30 Cam Follower and Track Roller - Stud Type Video