| No. | Brand | C | R | F | H | J | b | S | a |
| PCR-4-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| YR-3-1/4-C | SMITH | 113.36 kN | - | - | 190 mm | - | - | - | - |
| CR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
| MCR-30-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| MCR-85-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-X | SMITH | - | - | 153.5 mm | - | - | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-SBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| CR-1-7/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| MCR-40-S | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| YAF-08 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-S | SMITH | - | - | - | - | - | - | - | - |
| MYR-30 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-B | SMITH | 31.85 kN | - | - | - | - | - | - | - |
| MYR-50-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-1-5/8-C Cam Follower and Track Roller - Stud Type | N:12mm; T min.:-20 °C; G:M6x1; e:10 mm; L:125 mm; T max.:100 °C; C0:11.2 kN; d1:44.1 mm; A:31 mm; d:31.75 mm; |
| SMITH MCR-80-B Cam Follower and Track Roller - Stud Type | L2:13 mm; C:25.7 kN; d1:51.1 mm; L:129 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; H1:89 mm; L3:64 mm; Dz:80 mm; |
| SMITH CR-1-3/4-X Cam Follower and Track Roller - Stud Type | radial static load capacity:144800 lb; maximum rpm:1850 RPM; finish/coating:Powder Coated; series:9000; radial dynamic load capacity:140400 lb; expansion type:Non-Expansion Bearin; seal type:Clearance/Non-C; inner ring width:5-13/32 in; housing width:4-1/4 in; D:8-3/4 in; |
| SMITH CR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | d:75 mm; bearing material:Steel; manufacturer upc number:029176402531; cage material:Polyamide 66 Resin; closure type:Open; B:25 mm; series:NU200; static load capacity:156000 N; internal clearance:C0; fillet radius:1.5 mm; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | Characteristic rolling element frequency, BSF:10.79 Hz; Characteristic outer ring frequency, BPF0:15.44 Hz; B:25.5 mm; D:47 mm; G:M20X1.5; R:500 mm; B3:9 mm; Minimum Buy Quantity:N/A; Product Group:B04120; Min operating temperature, Tmin:-20 °C; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH CR-1-7/8-XBE Cam Follower and Track Roller - Stud Type | radial static load capacity:26000 lb; base width:2.19 in; duty type:Heavy Duty; base to bore centerline:2.3750 in; locking device:Concentric Collar; bore type:Round; expansion type:Expansion Bearing &#; overall length:8.0000 in; finish/coating:Black Oxide; housing construction:Split Pillow Block; |
| SMITH MYR-50-SC Cam Follower and Track Roller - Yoke Type | harmonization code:8487900040.US; D:4.5280 in; manufacturer catalog number:29602-2309; maximum shaft surface speed:12000 fpm; Weight:2.08 lbs; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; shaft diameter:3.4651 in; construction description:Guardian® Flange; lip material:Labyrinth; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
| SMITH MYRV-50-C Cam Follower and Track Roller - Yoke Type | mounting type:Four-Bolt Piloted; finish/coating:Uncoated; bore type:Round; series:204; D:3.5300 in; d:0.7500 in; seal type:Contact with Flinger; maximum rpm:7500 RPM; radial static load capacity:1482 lb; radial dynamic load capacity:2899 lb; |
| SMITH MCRV-52-S Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:7540 lb; radial static load capacity:6570 lb; series:200; mounting:Two-Bolt Base; seal type:Contact/Lip; bore type:Round; housing material:Cast Iron; overall height:5.0000 in; expansion type:Non-Expansion Bearin; maximum rpm:3200 RPM; |
| SMITH MYRV-12-C Cam Follower and Track Roller - Yoke Type | dynamic load capacity:22400 lbf; d:1.5748 in; compatible cup:44348B; static load capacity:19900 lbf; bearing material:Chrome Steel; abma precision rating:Class 2; inner ring width:0.933 in; operating temperature range:-65 to +250 &de; manufacturer upc number:053893291284; series:44000; |
| SMITH MCRV-47-BC Cam Follower and Track Roller - Stud Type | Dz:110 mm; G:M6x1; Designation of closed end cover:SCCE211; Weight:3.36 kg; B:55.4 mm; J:184 mm; N:19mm; L:130 mm; Designation of housing:FL211N-; A1:18 mm; |
| SMITH HR-3-1/2-XBC Cam Follower and Track Roller - Stud Type | d:1.3750 in; housing material:Cast Iron; D:3.6250 in; locking device:Set Screw; B:4.5938 in; expansion type:Non-Expansion Bearing (Fixed); overall height:1.6400 in; seal type:RST; bore type:Round; bolt size:0.4375 in; duty type:Standard Duty; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; replacement bearing:FHS207-22G; |
SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type Video