| SMITH YAF-08 Cam Follower and Track Roller - Yoke Type | head diameter:.6250 in; housing material:52100 Bearing Steel; shank thread length:.5620 in; head width:.2500 in; ball material:Chrome Steel; thread direction:Right Hand; ball width:.4370 in; operating temperature range:Max 250°; misalignment angle:6.5 °; race material:Brass; |
| SMITH BCR-2-3/4-XC Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:23000 lb; stud type:Double Row Heavy; roller width:18 mm; stud length:32.5 mm; roller shape:Flat; bearing element:Needle Rollers; closure type:Open; stud diameter:16 mm; roller diameter:35 mm; roller material:Steel; |
| SMITH HR-4-B Cam Follower and Track Roller - Stud Type | d:1-3/4 in; maximum pv value:50000; D:2 in; maximum p value:Static 8000 / Dynamic 2000 (psi); overall length:1 in; maximum v value:1200 (sfm); sleeve bearing type:Plain Sleeve; material specification:Oilite®, Synthetic Performance Difference®; bearing material:Oil-Impregnated Bronze; standards met:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; groove/plug type:None; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
| SMITH MCRV-52-BC Cam Follower and Track Roller - Stud Type | B:14 mm; manufacturer upc number:029176034961; snap ring included:With Snap Ring; closure type:Open; internal clearance:Normal Clearance; bore type:Round; D:47 mm; d:17 mm; |
| SMITH CR-1-5/8-X Cam Follower and Track Roller - Stud Type | Brand:SNR; E:209.5 mm; Characteristic inner ring frequency, BPFI:9.81 Hz; Characteristic outer ring frequency, BPF0:7.19 Hz; d:130 mm; D:230 mm; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:47 kN; F:153.5 mm; ra max:2.5 mm; |
| SMITH MCR-80-S Cam Follower and Track Roller - Stud Type | type:Stepped; material:Steel; length:24 in; |
| SMITH CR-1-1/4-C-SS Cam Follower and Track Roller - Stud Type | B:1.5000 in; D:2.0000 in; manufacturer catalog number:716107; overall length:3.1250 in; finish/coating:Uncoated; locking device:Set Screw; duty type:Normal Duty; replacement bearing:2-012C RM; d:0.7500 in; base to bore centerline:1.3125 in; |
| SMITH BCR-1-5/8-C Cam Follower and Track Roller - Stud Type | N:12mm; T min.:-20 °C; G:M6x1; e:10 mm; L:125 mm; T max.:100 °C; C0:11.2 kN; d1:44.1 mm; A:31 mm; d:31.75 mm; |
| SMITH MYR-25-SC Cam Follower and Track Roller - Yoke Type | SW:4.76 mm; G:M6x1; C0:32.8 kN; A5:39.7 mm; T min.:-20 °C; C:52.5 kN; Weight:2.45 kg; s1:32.55 mm; S:25.4 mm; T max.:200 °C; |
| SMITH BYR-1-7/8-XC Cam Follower and Track Roller - Yoke Type | maximum rpm:2900 RPM; D:8.8750 in; bolt size:0.8750 in; series:200; bore type:Round; housing material:Cast Iron; length through bore:2.2656 in; seal type:Contact/Lip; manufacturer upc number:662864715546; mounting:Two-Bolt Base; |
| SMITH MYR-50-SC Cam Follower and Track Roller - Yoke Type | harmonization code:8487900040.US; D:4.5280 in; manufacturer catalog number:29602-2309; maximum shaft surface speed:12000 fpm; Weight:2.08 lbs; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; shaft diameter:3.4651 in; construction description:Guardian® Flange; lip material:Labyrinth; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | Characteristic rolling element frequency, BSF:10.79 Hz; Characteristic outer ring frequency, BPF0:15.44 Hz; B:25.5 mm; D:47 mm; G:M20X1.5; R:500 mm; B3:9 mm; Minimum Buy Quantity:N/A; Product Group:B04120; Min operating temperature, Tmin:-20 °C; |
| SMITH PCR-2-1/4-E Cam Follower and Track Roller - Stud Type | J:78 mm; L:60 mm; S:12.7 mm; G:M6x1; Dz:54 mm; s1:15.5 mm; C0:6.65 kN; Z:37 mm; A:25.5 mm; H:102 mm; |