| No. | Brand | C | R | F | H | J | b | S | a |
| MCR-19-SBC | SMITH | - | - | - | - | - | - | - | - |
| HR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-BC | SMITH | - | - | - | - | - | - | - | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-2-SS | SMITH | - | - | - | - | - | - | - | - |
| MUTD-45100 | SMITH | - | 500 mm | - | - | - | - | - | - |
| YR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/8 | SMITH | - | - | - | 72 mm | - | - | - | - |
| YR-3/4-X-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| MCR-90-C | SMITH | 122.85 kN | - | - | - | - | - | 40.5 mm | - |
| CR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| MPCR-40 | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| PYR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| BYR-1-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| CR-11/16-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MYRV-25-C | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| MFCR-72 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-3/4-BC Cam Follower and Track Roller - Stud Type | Dimension M:6.0 in; Maximum Speed:1820 rpm; Dimension H:7.520 in; Support Type:Four-Bolt Plummer Bl; Bearing - Housing - Seal:HSE311BRH; Dimension L:20.2 in; Bearing Number:HSE311BR; Housing Width:7.9 in; Bearing Type:Split Cylindrical Re; Shaft Size:3-11/16 in; |
| SMITH CR-9/16-XBE Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):8110; Cone Part Number:M272749; Cg - Geometry Factor:0.26; Db - Cup Backface Backing Diameter:632.97 mm; Ab - Cage-Cone Frontface Clearance:10.4 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:839000 lbf; Design Units:Imperial; e - ISO Factor8:0.33; Cage Type:Pin-Type; R - Cone Backface To Clear Radius1:6.35 mm; |
| SMITH CR-1/2-C-SS Cam Follower and Track Roller - Stud Type | maximum rpm:2440 RPM; finish/coating:Uncoated; fillet radius:3 mm; cage material:Brass; precision rating:Not Rated; static load capacity:2370000 N; closure type:Open; internal clearance:C3; number of rows:1; B:108 mm; |
| SMITH MPYR-62 Cam Follower and Track Roller - Yoke Type | radial static load capacity:16100 lbf; radial dynamic load capacity:21500 lbf; D:6.7500 in; bore type:Round; locking device:Set Screw; housing material:Cast Iron; expansion type:Non-Expansion Bearin; length through bore:3.780 in; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH DYR-6 Cam Follower and Track Roller - Yoke Type | compatible bore diameter:3 in, 2-11/16 i; material:Steel; end cap type:Closed End Cap; |
| SMITH CR-1-3/4-XB Cam Follower and Track Roller - Stud Type | Z:64 mm; s1:30.5 mm; Dz:54 mm; d1:32.4 mm; A5:17 mm; L1:225 mm; Weight:1.69 kg; Designation of open end cover:SCOE204-20; B:34 mm; L:264 mm; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
| SMITH MCR-80-B Cam Follower and Track Roller - Stud Type | L2:13 mm; C:25.7 kN; d1:51.1 mm; L:129 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; H1:89 mm; L3:64 mm; Dz:80 mm; |
| SMITH HR-2-1/2-B Cam Follower and Track Roller - Stud Type | outer ring width:1-15/16 in; finish/coating:Uncoated; row type & fill slot:Double-Row Non-Fill; cage material:Steel; series:5200; fillet radius:2 mm; precision rating:Not Rated; maximum rpm:2560 RPM; D:150 mm; internal clearance:C0; |
| SMITH MCR-72-SC Cam Follower and Track Roller - Stud Type | seal type:Clearance/Non-C; d:2-7/16 in; radial static load capacity:46800 lb; lubrication type:Lubrication Fitting; inner ring width:4-5/32 in; finish/coating:Powder Coated; housing material:Cast Iron; bearing type:Spherical Roller; maximum rpm:3300 RPM; D:7-5/8 in; |
| SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type | cage material:No Cage; internal clearance:C0; standards met:SAE-AS7949, AISI 521; inner ring width:7.54 mm; outer ring width:6.86 mm; series:KSP; B:0.2970 in; d:0.1900 in; finish/coating:Cadmium Plated; bearing material:Steel; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH CR-2-SS Cam Follower and Track Roller - Stud Type | Cone Part Number:495AX; Y1 - ISO Factor9:1.52; D:5.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6850 lbf; Cup Part Number:493D; C - Double Cup Width:2.125 in; d:3 in; Y2 - ISO Factor10:2.26; Cg - Geometry Factor12:0.125; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9000 lbf; |
SMITH MUTD-25 Cam Follower and Track Roller - Yoke Type Video