| No. | Brand | C | R | F | H | J | b | S | a |
| HR-4-B | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4-XBC | SMITH | 31.85 kN | - | - | 180 mm | 148.5 mm | - | - | - |
| CR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| MYRV-5 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
| YAG-28 | SMITH | 14 kN | - | - | - | - | - | - | - |
| PCR-2-1/4-E | SMITH | - | - | - | 102 mm | 78 mm | - | 12.7 mm | - |
| CR-1-5/8-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| CR-1-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBE | SMITH | 43.55 kN | - | - | - | - | - | - | - |
| MPYR-200 | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| NUKR-30 | SMITH | 43.55 kN | - | - | 63.5 mm | 176 mm | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| MPYR-62 | SMITH | - | - | - | - | - | - | - | - |
| BCR-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8 | SMITH | - | - | - | - | - | 20.3 mm | - | - |
| CR-2-1/2-XC | SMITH | 19 mm | - | - | - | - | - | 18.2 mm | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| VCR-4-1/2-E | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-3/8-B Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; Weight:1.076 lbs; harmonization code:3926904590.US; maximum shaft surface speed:12000 fpm; pressure tolerance:Ambient; shaft diameter:1.7500 in; width:0.6250 in; D:2.7970 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; |
| SMITH MCRV-80-SBC Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:22200; overall height:5-1/4 in; D:35 in; series:22200; compatible bore diameter:1-15/16 in; base width:4-1/2 in; travel:18 in; frame type:One-Piece Saddle Mou; bolt center-to-center width:2-1/2 in; overall length:37 in; |
| SMITH MCRV-52-S Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:7540 lb; radial static load capacity:6570 lb; series:200; mounting:Two-Bolt Base; seal type:Contact/Lip; bore type:Round; housing material:Cast Iron; overall height:5.0000 in; expansion type:Non-Expansion Bearin; maximum rpm:3200 RPM; |
| SMITH PCR-2-1/4-E Cam Follower and Track Roller - Stud Type | J:78 mm; L:60 mm; S:12.7 mm; G:M6x1; Dz:54 mm; s1:15.5 mm; C0:6.65 kN; Z:37 mm; A:25.5 mm; H:102 mm; |
| SMITH MPCR-40 Cam Follower and Track Roller - Stud Type | thread size:M 190x3; series:AH; compatible shaft diameter:170 mm; manufacturer upc number:7316570136128; lock nut number:KM34; taper:1:12; overall length:122 mm; lock washer number:MB34; |
| SMITH MCRV-52-BC Cam Follower and Track Roller - Stud Type | B:14 mm; manufacturer upc number:029176034961; snap ring included:With Snap Ring; closure type:Open; internal clearance:Normal Clearance; bore type:Round; D:47 mm; d:17 mm; |
| SMITH PCR-3-E Cam Follower and Track Roller - Stud Type | fillet radius:0.06 in; series:KD; radial dynamic load capacity:2580 lbf; d:6.0000 in; internal clearance:C0; B:0.5000 in; closure type:Open; bearing material:Chrome Steel; precision rating:ABEC 1 (ISO Cla; operating temperature range:-65 to +250 &de; |
| SMITH MCR-72 Cam Follower and Track Roller - Stud Type | Fatigue limit load, Cu:0.34 kN; Dynamic load, C:12.5 kN; da min:32 mm; Radial clearance class:C3; Min operating temperature, Tmin:-25 °C; ra max:0.6 mm; Da max:48 mm; Mass:0.1 kg; Characteristic cage frequency, FTF:0.41 Hz; Static load, C0:7.4 kN; |
| SMITH CR-2-SS Cam Follower and Track Roller - Stud Type | Cone Part Number:495AX; Y1 - ISO Factor9:1.52; D:5.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6850 lbf; Cup Part Number:493D; C - Double Cup Width:2.125 in; d:3 in; Y2 - ISO Factor10:2.26; Cg - Geometry Factor12:0.125; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9000 lbf; |
| SMITH HR-3/4-C Cam Follower and Track Roller - Stud Type | B:9 mm; D:37 mm; cage material:Phenolic; closure type:Open; d:20 mm; manufacturer upc number:029176726729; |
| SMITH VCR-4-1/2 Cam Follower and Track Roller - Stud Type | Y1 - Geometry Factor:3.14; Dimension L:3.87 in; Dimension D Max:8.40 in; Full Timken Part Number:QAPL15A300SB; C0 - Static Load:54100 lb; Eng Internal Radial Clearance - Min:0.0020; Pre Install Clearance Max:0.0031 in; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension A:3.25 in; Weight:28 lb; |
| SMITH CR-1-1/8-BC Cam Follower and Track Roller - Stud Type | T min.:-20 °C; C0:15.2 kN; d:35 mm; H:90 mm; d1:51.1 mm; A5:18.8 mm; L3:40 mm; E:24 mm; Recommended tightening torque for set screw:11.5 Nm; s1:36.3 mm; |
| SMITH IRR-13/16 Needle Non Thrust Roller Bearings | D:2-3/16 in; series:TTSP; thrust bearing type:Tapered Race; B:5/8 in; operating temperature range:-65 to +250 &de; d:1.26 in; fillet radius:0.03 in; |
| SMITH YAF-08 Cam Follower and Track Roller - Yoke Type | head diameter:.6250 in; housing material:52100 Bearing Steel; shank thread length:.5620 in; head width:.2500 in; ball material:Chrome Steel; thread direction:Right Hand; ball width:.4370 in; operating temperature range:Max 250°; misalignment angle:6.5 °; race material:Brass; |
SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type Video