| SMITH MCR-30-C Cam Follower and Track Roller - Stud Type | d:25 mm; series:UCNTPL200MZ2W; overall length:99 mm; overall height:88.5 mm; manufacturer product page:Click here; lubrication type:Lubrication Fitting; seal type:Contact with Slinger; slot spacing:45 mm; slot width:6.4 mm; unit type:Side Mount; |
| SMITH HR-3-1/2-XBC Cam Follower and Track Roller - Stud Type | d:1.3750 in; housing material:Cast Iron; D:3.6250 in; locking device:Set Screw; B:4.5938 in; expansion type:Non-Expansion Bearing (Fixed); overall height:1.6400 in; seal type:RST; bore type:Round; bolt size:0.4375 in; duty type:Standard Duty; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; replacement bearing:FHS207-22G; |
| SMITH MYRV-15-C Cam Follower and Track Roller - Yoke Type | bore type:Straight; d:200 mm; lubrication hole type:No Holes; fillet radius:4 mm; outer ring width:165 mm; cage material:Brass; internal clearance:C0; outer ring type:Not Split; series:233; static load capacity:3600000 N; |
| SMITH MCR-72-SC Cam Follower and Track Roller - Stud Type | seal type:Clearance/Non-C; d:2-7/16 in; radial static load capacity:46800 lb; lubrication type:Lubrication Fitting; inner ring width:4-5/32 in; finish/coating:Powder Coated; housing material:Cast Iron; bearing type:Spherical Roller; maximum rpm:3300 RPM; D:7-5/8 in; |
| SMITH MYRV-5 Cam Follower and Track Roller - Yoke Type | e - Geometry Factor:0.25; Pre Install Clearance Max:0.0067 in; Shaft Tolerance:0.0030 in; Dimension B:8.780 in; C - Dynamic Load (Basic):125000 lb; Dimension H:2.12 in; Bearing Number:22222; Y1 - Geometry Factor:2.73; Pre Install Clearance Min:0.0053 in; Dimension C:5.5 in; |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH MYR-20-C Cam Follower and Track Roller - Yoke Type | S:8.5 mm; J:82.6 mm; C:25.7 kN; N:M10; L1:22.5 mm; Designation of bearing:US207G2T04; Dz:80 mm; C0:15.2 kN; A:45 mm; B:32 mm; |
| SMITH MPYR-200 Cam Follower and Track Roller - Yoke Type | lubrication type:Lubrication Fitting; radial static load capacity:21000 lb; manufacturer catalog number:072387; expansion type:Non-Expansion Bearin; bearing type:Spherical Roller; B:4.6200 in; seal type:Triple Lip with Flin; finish/coating:Uncoated; bore type:Round; D:3.5400 in; |
| SMITH CR-1-3/4-X Cam Follower and Track Roller - Stud Type | radial static load capacity:144800 lb; maximum rpm:1850 RPM; finish/coating:Powder Coated; series:9000; radial dynamic load capacity:140400 lb; expansion type:Non-Expansion Bearin; seal type:Clearance/Non-C; inner ring width:5-13/32 in; housing width:4-1/4 in; D:8-3/4 in; |
| SMITH MCR-26-SB Cam Follower and Track Roller - Stud Type | Designation of housing:FA207N-; N:15mm; Z:30 mm; B:42.9 mm; A2:44.4 mm; C0:15.2 kN; C:25.7 kN; J:130 mm; Weight:1.28 kg; Recommended tightening torque for set screw:8 Nm; |
| SMITH YR-3-1/4-C Cam Follower and Track Roller - Yoke Type | T max.:100 °C; C:113.36 kN; SW:6.35 mm; s1:41 mm; H:190 mm; A5:50 mm; d:76.2 mm; A3:4 mm; T min.:-20 °C; B:82 mm; |
| SMITH PCR-4-1/2 Cam Follower and Track Roller - Stud Type | overall height:6.6300 in; seal type:Triple-lip contactin; radial static load capacity:48600 lbs; duty type:Heavy Duty; manufacturer catalog:Click here; housing construction:Solid Housing; bolt size:0.6250 in; B:6.6300 in; D:5.3800 in; manufacturer upc number:883450161602; |
| SMITH VCR-4-1/2 Cam Follower and Track Roller - Stud Type | Y1 - Geometry Factor:3.14; Dimension L:3.87 in; Dimension D Max:8.40 in; Full Timken Part Number:QAPL15A300SB; C0 - Static Load:54100 lb; Eng Internal Radial Clearance - Min:0.0020; Pre Install Clearance Max:0.0031 in; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension A:3.25 in; Weight:28 lb; |
| SMITH MCRV-35-C Cam Follower and Track Roller - Stud Type | Designation of bearing:US211-32G2T04; H3:125; L:185 mm; A4:30 mm; B:45.3 mm; T max.:100 °C; Dz:110 mm; A2:46.5 mm; Recommended tightening torque for set screw:8 Nm; Z:62.8 mm; |