| No. | Brand | C | R | F | H | J | b | S | a |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-80-SBC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| MYR-50-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/8-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| CR-2-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-30-C | SMITH | - | - | - | - | - | - | - | - |
| MPYR-200 | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-A-XBC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-XC | SMITH | 19 mm | - | - | - | - | - | 18.2 mm | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-BC | SMITH | - | - | - | - | 184 mm | - | - | - |
| MYR-40-SC | SMITH | - | - | - | - | - | - | - | - |
| MFYR-80 | SMITH | - | - | - | - | - | - | - | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/8 | SMITH | - | - | - | 72 mm | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-2-1/2-X Cam Follower and Track Roller - Stud Type | overall height:108 mm; bolt size:M14; seal type:Contact with Slinger; expansion type:Non-Expansion Bearin; D:137 mm to 156 mm; base width:54 mm; lubrication type:Lubrication Fitting; base to bore centerline:54 mm; d:45 mm; duty type:Normal Duty; |
| SMITH MFYR-90 Cam Follower and Track Roller - Yoke Type | d:110 mm; closure type:Open; standards met:DIN 630; internal clearance:C0; series:13; precision rating:P0, ABEC 1 (ISO; outer ring width:50 mm; static load capacity:71000 N; cage material:Brass; maximum rpm:4500 RPM; |
| SMITH CR-1-5/8-X Cam Follower and Track Roller - Stud Type | Brand:SNR; E:209.5 mm; Characteristic inner ring frequency, BPFI:9.81 Hz; Characteristic outer ring frequency, BPF0:7.19 Hz; d:130 mm; D:230 mm; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:47 kN; F:153.5 mm; ra max:2.5 mm; |
| SMITH VCR-4-1/2 Cam Follower and Track Roller - Stud Type | Y1 - Geometry Factor:3.14; Dimension L:3.87 in; Dimension D Max:8.40 in; Full Timken Part Number:QAPL15A300SB; C0 - Static Load:54100 lb; Eng Internal Radial Clearance - Min:0.0020; Pre Install Clearance Max:0.0031 in; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension A:3.25 in; Weight:28 lb; |
| SMITH VCR-5-1/2 Cam Follower and Track Roller - Stud Type | stud length:2.0000 in; stud diameter:1.2500 in; closure type:Sealed; roller diameter:2.0000 in; roller width:1.2500 in; radial static load capacity:21140 lbs; thread size:1-1/8-12; roller shape:Crowned; bearing element:Needle Rollers; head type:Slotted; |
| SMITH PYR-3-1/2 Cam Follower and Track Roller - Yoke Type | axial static load capacity:147700 lb; axial dynamic load capacity:41970 lb; B:1.0000 in; fillet radius:0.08 in; bearing material:Steel; radial static load capacity:59100 lb; operating temperature range:-65 to +250 &de; standards met:AISI 52100; closure type:Open; D:37.0000 in; |
| SMITH MUTD-25 Cam Follower and Track Roller - Yoke Type | lip material:Labyrinth; shaft diameter:1.8750 in; Weight:0.204 lb; typical application:Exceptional Bearing; harmonization code:3926904590.US; width:0.6250 in; construction description:ISO-GARD® Flange; continuous temperature range:-22 to 400°F; manufacturer catalog number:29519-0989; maximum shaft surface speed:4500 fpm; |
| SMITH BCR-1/2-C Cam Follower and Track Roller - Stud Type | Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:M06288; |
| SMITH MCR-19-SBC Cam Follower and Track Roller - Stud Type | D:35 mm; compatible bearing part number:AXK, K811; compatible bearing type:Needle Roller Thrust; inside diameter:20 mm; washer type:Thrust Washer; width:2.75 mm; |
| SMITH MCR-90-C Cam Follower and Track Roller - Stud Type | C:122.85 kN; S:40.5 mm; A5:40.5 mm; Designation of bearing:EX316G2L3; Recommended tightening torque for set screw:64 Nm; C0:86.5 kN; G:M10x1; s1:72.3 mm; SW:8 mm; T max.:100 °C; |
| SMITH HR-3/4-C Cam Follower and Track Roller - Stud Type | B:9 mm; D:37 mm; cage material:Phenolic; closure type:Open; d:20 mm; manufacturer upc number:029176726729; |
| SMITH CR-2-XC-SS Cam Follower and Track Roller - Stud Type | J:171 mm; d1:74.5 mm; N1:25 mm; S:27.7 mm; Designation of bearing:EX211G2T04; Designation of open end cover:SCOE211-55; H2:126 mm; B:55.4 mm; G:M6x1; Designation of housing:P211N-; |
| SMITH HR-7/8-X Cam Follower and Track Roller - Stud Type | B:2.7969 in; flange mounting type:Three-Bolt Triangle; housing construction:Solid Housing; housing material:Aluminum; compatible bore diameter:1.0000 in, 0.8750 in; D:3.0000 in; series:LF; |
| SMITH MCRV-85-C Cam Follower and Track Roller - Stud Type | head diameter:1.7500 in; lubrication:Grease; operating temperature range:Max 350°; axial static load capacity:1130 lb; series:TM; ball material:Alloy Steel - heat t; shank thread size:3/4-16; lubrication type:With Lubrication Fit; housing material:Carbon Steel - corro; misalignment angle:7 °; |
SMITH MFYR-80 Cam Follower and Track Roller - Yoke Type Video