| No. | Brand | C | R | F | H | J | b | S | a |
| CR-1-7/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-BC | SMITH | - | - | - | - | 184 mm | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| CR-3 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MFYR-80 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBEC | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| MUTD-45100 | SMITH | - | 500 mm | - | - | - | - | - | - |
| MCRV-35-C | SMITH | - | - | - | - | - | - | - | - |
| MYRV-25-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MCRV-85-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH MYR-20-C Cam Follower and Track Roller - Yoke Type | S:8.5 mm; J:82.6 mm; C:25.7 kN; N:M10; L1:22.5 mm; Designation of bearing:US207G2T04; Dz:80 mm; C0:15.2 kN; A:45 mm; B:32 mm; |
| SMITH VYR-8-1/2 Cam Follower and Track Roller - Yoke Type | L:2.323 in; Threads No. per Inch:12; d:3.543 in; A:3.950 in; Taper:1:12; G:0.413 in; Major Dia - B:4.325 in; F:0.115 in; Weight:2.00 lb; |
| SMITH CR-2-1/2-B Cam Follower and Track Roller - Stud Type | T max.:100 °C; H3:90; C0:15.2 kN; Weight:1.37 kg; T min.:-20 °C; C:25.7 kN; L:135 mm; d:36.51 mm; A1:10 mm; A2:32.5 mm; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH CR-1-3/8-B Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; Weight:1.076 lbs; harmonization code:3926904590.US; maximum shaft surface speed:12000 fpm; pressure tolerance:Ambient; shaft diameter:1.7500 in; width:0.6250 in; D:2.7970 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; |
| SMITH CR-11/16-XC Cam Follower and Track Roller - Stud Type | Brand:SNR; da max:10.7 mm; D:22 mm; d:8 mm; D1:18 mm; ra max:0.3 mm; f0:12.4; Nref:32,000 rpm; Static load, C0:1.37 kN; d1:10.7 mm; |
| SMITH CR-1-3/4-BC Cam Follower and Track Roller - Stud Type | Dimension M:6.0 in; Maximum Speed:1820 rpm; Dimension H:7.520 in; Support Type:Four-Bolt Plummer Bl; Bearing - Housing - Seal:HSE311BRH; Dimension L:20.2 in; Bearing Number:HSE311BR; Housing Width:7.9 in; Bearing Type:Split Cylindrical Re; Shaft Size:3-11/16 in; |
| SMITH CR-2-1/4-B Cam Follower and Track Roller - Stud Type | manufacturer catalog number:701903; bore type:Round; replacement bearing:AR-2-23; locking device:Set Screw; base width:3.1250 in; bolt size:.7500 in; operating temperature range:Max 250°; base to bore centerline:2.7500 in; finish/coating:Uncoated; mounting:Two-Bolt Base; |
| SMITH YAF-08 Cam Follower and Track Roller - Yoke Type | head diameter:.6250 in; housing material:52100 Bearing Steel; shank thread length:.5620 in; head width:.2500 in; ball material:Chrome Steel; thread direction:Right Hand; ball width:.4370 in; operating temperature range:Max 250°; misalignment angle:6.5 °; race material:Brass; |
| SMITH MCR-19-SBC Cam Follower and Track Roller - Stud Type | D:35 mm; compatible bearing part number:AXK, K811; compatible bearing type:Needle Roller Thrust; inside diameter:20 mm; washer type:Thrust Washer; width:2.75 mm; |
| SMITH CR-2-1/4-BC Cam Follower and Track Roller - Stud Type | finish/coating:Uncoated; lubrication hole type:No Hole; material:Chrome Steel; manufacturer upc number:053893362687; compatible cone:67388, 67389, 67391,; flange type:Non-Flanged Cup; D:7.7500 in; single or double cup:Single Cup; cup width:1.5000 in; abma precision rating:Class 2; |
| SMITH MYRV-5 Cam Follower and Track Roller - Yoke Type | e - Geometry Factor:0.25; Pre Install Clearance Max:0.0067 in; Shaft Tolerance:0.0030 in; Dimension B:8.780 in; C - Dynamic Load (Basic):125000 lb; Dimension H:2.12 in; Bearing Number:22222; Y1 - Geometry Factor:2.73; Pre Install Clearance Min:0.0053 in; Dimension C:5.5 in; |
| SMITH CR-1/2-C Cam Follower and Track Roller - Stud Type | manufacturer upc number:087796026346; lubrication hole type:Lubrication Groove &; bearing material:Chrome Steel; D:150 mm; bore type:Straight; d:70 mm; outer ring type:Not Split; finish/coating:Uncoated; cage material:Steel Cage; B:51 mm; |
| SMITH MCRV-26-B Cam Follower and Track Roller - Stud Type | series:9000; inner ring width:4-1/4 in; expansion type:Non-Expansion Bearin; bearing type:Spherical Roller; maximum rpm:1400 RPM; housing width:3-7/16 in; lubrication type:Lubrication Fitting; D:6-3/4 in; radial dynamic load capacity:82000 lb; finish/coating:Powder Coated; |
SMITH YR-1-3/8 Cam Follower and Track Roller - Yoke Type Video