| No. | Brand | C | R | F | H | J | b | S | a |
| MCR-30-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26 | SMITH | - | - | - | - | 99 mm | - | 17.4 mm | - |
| HR-2-1/2-B | SMITH | - | - | - | - | - | - | - | - |
| YAG-12 | SMITH | 12.8 kN | - | - | - | 78 mm | - | - | - |
| CR-1-3/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| NUKR-30 | SMITH | 43.55 kN | - | - | 63.5 mm | 176 mm | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| VYR-8-1/2 | SMITH | - | - | 0.115 in | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MPYR-200 | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| MYR-50-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC | SMITH | - | - | - | - | - | - | - | - |
| IRR-1/2 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-2-SS Cam Follower and Track Roller - Stud Type | Cone Part Number:495AX; Y1 - ISO Factor9:1.52; D:5.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6850 lbf; Cup Part Number:493D; C - Double Cup Width:2.125 in; d:3 in; Y2 - ISO Factor10:2.26; Cg - Geometry Factor12:0.125; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9000 lbf; |
| SMITH MCRV-35-C Cam Follower and Track Roller - Stud Type | Designation of bearing:US211-32G2T04; H3:125; L:185 mm; A4:30 mm; B:45.3 mm; T max.:100 °C; Dz:110 mm; A2:46.5 mm; Recommended tightening torque for set screw:8 Nm; Z:62.8 mm; |
| SMITH MYR-25-SC Cam Follower and Track Roller - Yoke Type | SW:4.76 mm; G:M6x1; C0:32.8 kN; A5:39.7 mm; T min.:-20 °C; C:52.5 kN; Weight:2.45 kg; s1:32.55 mm; S:25.4 mm; T max.:200 °C; |
| SMITH HR-3-1/2-XBC Cam Follower and Track Roller - Stud Type | d:1.3750 in; housing material:Cast Iron; D:3.6250 in; locking device:Set Screw; B:4.5938 in; expansion type:Non-Expansion Bearing (Fixed); overall height:1.6400 in; seal type:RST; bore type:Round; bolt size:0.4375 in; duty type:Standard Duty; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; replacement bearing:FHS207-22G; |
| SMITH CR-5/8-X-SS Cam Follower and Track Roller - Stud Type | assembly type:Double Row; double outer ring width:3.000 in; manufacturer upc number:053893533063; D:10.0000 in; bearing material:Steel; cup width:3.0000 in; abma precision rating:Class 2; d:6.5000 in; cone width:1.8125 in; |
| SMITH YR-3/4-X-SS Cam Follower and Track Roller - Yoke Type | seal type:Felt Seal; D:4.8750 to 5.8750 in; duty type:Normal Duty; bolt size:14 mm; lubrication type:Lubrication Fitting; locking device:Skwezloc; bore type:Round; B:2.0000 in; expansion type:Non-Expansion Bearin; housing material:Cast Iron; |
| SMITH MYR-20-C Cam Follower and Track Roller - Yoke Type | S:8.5 mm; J:82.6 mm; C:25.7 kN; N:M10; L1:22.5 mm; Designation of bearing:US207G2T04; Dz:80 mm; C0:15.2 kN; A:45 mm; B:32 mm; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH BCR-7/8 Cam Follower and Track Roller - Stud Type | series:300; housing width:1-27/32 in; expansion type:Expansion Bearing &#; housing material:Steel; lubrication type:Lubrication Fitting; radial static load capacity:7110 lb; bearing material:Steel; inner ring width:2-19/32 in; seal type:Clearance/Non-C; maximum rpm:6200 RPM; |
| SMITH CR-1-7/8-XBE Cam Follower and Track Roller - Stud Type | radial static load capacity:26000 lb; base width:2.19 in; duty type:Heavy Duty; base to bore centerline:2.3750 in; locking device:Concentric Collar; bore type:Round; expansion type:Expansion Bearing &#; overall length:8.0000 in; finish/coating:Black Oxide; housing construction:Split Pillow Block; |
| SMITH HR-1-1/2-C Cam Follower and Track Roller - Stud Type | Dimension G:3.410 in; Dimension RV:0.23 in; Eng Internal Radial Clearance - Min:0.0043; Dimension B:7.69 in; Y2 - Geometry Factor:4.29; Dimension C:4.9 in; Shaft Tolerance:0.0030 in; Dimension D Min:9.38 in; Grease Lubrication - B/C/O Seal:950 rpm; Float:0.083 in; |
| SMITH CR-1/2-A-XBC Cam Follower and Track Roller - Stud Type | D:150 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Da max:139 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; d1:95.1 mm; Fatigue limit load, Cu:2.95 kN; da min:71 mm; d:60 mm; ra max:2 mm; Mass:2.87 kg; |
| SMITH MYRV-5 Cam Follower and Track Roller - Yoke Type | e - Geometry Factor:0.25; Pre Install Clearance Max:0.0067 in; Shaft Tolerance:0.0030 in; Dimension B:8.780 in; C - Dynamic Load (Basic):125000 lb; Dimension H:2.12 in; Bearing Number:22222; Y1 - Geometry Factor:2.73; Pre Install Clearance Min:0.0053 in; Dimension C:5.5 in; |
| SMITH MFCR-72 Cam Follower and Track Roller - Stud Type | Grease Reference Speed:9300 rpm; Bore Size d:35 mm; Features:Open; C0r - Static Load Rating:19.2 kN; Oil Reference Speed:13000 rpm; Clearance:C3; Weight:0.45 Kg; Outside Diameter D:80.000 mm; Outside Ring Width B:21.000 mm; Cr - Dynamic Load Rating:33.4 kN; |
SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type Video