| No. | Brand | C | R | F | H | J | b | S | a |
| MCR-26-SB | SMITH | 25.7 kN | - | - | - | 130 mm | - | - | - |
| YR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| YR-3-1/4-C | SMITH | 113.36 kN | - | - | 190 mm | - | - | - | - |
| CR-2-SS | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/8 | SMITH | - | - | - | 72 mm | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-X | SMITH | - | - | 153.5 mm | - | - | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4-XBC | SMITH | 31.85 kN | - | - | 180 mm | 148.5 mm | - | - | - |
| MCRV-52-S | SMITH | - | - | - | - | - | - | - | - |
| MCRV-85-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-X-SS | SMITH | - | - | - | - | - | - | - | - |
| VCR-5-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MYR-15 | SMITH | - | - | - | - | - | - | - | - |
| PCR-4-1/2 | SMITH | - | - | - | - | - | - | - | - |
| NUKR-30 | SMITH | 43.55 kN | - | - | 63.5 mm | 176 mm | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| MCR-80-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| PYR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-2-1/2-X Cam Follower and Track Roller - Stud Type | overall height:108 mm; bolt size:M14; seal type:Contact with Slinger; expansion type:Non-Expansion Bearin; D:137 mm to 156 mm; base width:54 mm; lubrication type:Lubrication Fitting; base to bore centerline:54 mm; d:45 mm; duty type:Normal Duty; |
| SMITH VCR-4-1/2-E Cam Follower and Track Roller - Stud Type | expansion type:Non-Expansion Bearin; d:30 mm; D:2.4409 in; B:38.10 mm; bore type:Round; seal type:Single Lip Contact; series:ER; bearing material:52100/Black Oxi; cage material:Brass; radial dynamic load capacity:4381 lb; |
| SMITH CR-1-1/4-C-SS Cam Follower and Track Roller - Stud Type | B:1.5000 in; D:2.0000 in; manufacturer catalog number:716107; overall length:3.1250 in; finish/coating:Uncoated; locking device:Set Screw; duty type:Normal Duty; replacement bearing:2-012C RM; d:0.7500 in; base to bore centerline:1.3125 in; |
| SMITH CR-11/16-XC Cam Follower and Track Roller - Stud Type | Brand:SNR; da max:10.7 mm; D:22 mm; d:8 mm; D1:18 mm; ra max:0.3 mm; f0:12.4; Nref:32,000 rpm; Static load, C0:1.37 kN; d1:10.7 mm; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
| SMITH MPYR-200 Cam Follower and Track Roller - Yoke Type | lubrication type:Lubrication Fitting; radial static load capacity:21000 lb; manufacturer catalog number:072387; expansion type:Non-Expansion Bearin; bearing type:Spherical Roller; B:4.6200 in; seal type:Triple Lip with Flin; finish/coating:Uncoated; bore type:Round; D:3.5400 in; |
| SMITH CR-1-1/2-XB Cam Follower and Track Roller - Stud Type | H1:112.0 mm; Housing Mass:14 Kg; Material :Cast Iron; L:345.00 mm; A1:100 mm; Shaft Diameter d:2 11/16 in; Bolt Qty:2; Seal Type:V-ring; C0 Static Load Rating:363; Adapter Sleeve1:HA316; |
| SMITH CR-1/2-C-SS Cam Follower and Track Roller - Stud Type | maximum rpm:2440 RPM; finish/coating:Uncoated; fillet radius:3 mm; cage material:Brass; precision rating:Not Rated; static load capacity:2370000 N; closure type:Open; internal clearance:C3; number of rows:1; B:108 mm; |
| SMITH CR-1/2-C Cam Follower and Track Roller - Stud Type | manufacturer upc number:087796026346; lubrication hole type:Lubrication Groove &; bearing material:Chrome Steel; D:150 mm; bore type:Straight; d:70 mm; outer ring type:Not Split; finish/coating:Uncoated; cage material:Steel Cage; B:51 mm; |
| SMITH DCR-1-1/4 Cam Follower and Track Roller - Stud Type | d1:146 mm; A3:4 mm; C0:140 kN; SW:9.52 mm; H:260 mm; G:M10x1; Recommended tightening torque for set screw:65.2 Nm; T max.:200 °C; Designation of bearing:EX320-64G2T20; A5:50 mm; |
| SMITH MYRV-15-C Cam Follower and Track Roller - Yoke Type | bore type:Straight; d:200 mm; lubrication hole type:No Holes; fillet radius:4 mm; outer ring width:165 mm; cage material:Brass; internal clearance:C0; outer ring type:Not Split; series:233; static load capacity:3600000 N; |
| SMITH YR-1-3/8-XC Cam Follower and Track Roller - Yoke Type | Bearing - Housing - Seal:MSM200BXHKPS; Cr - Dynamic Load Rating:227732 lbf; Dimension L:10.1 in; Shaft Size:200 mm; Dimension T:25.5 in; Bolt Size:4 x M30; Support Type:Round Flange; Seal Type:Kevlar Packing Seal; Dimension H:5.4 in; Series Type:Medium Series; |
| SMITH CR-1-3/4-BC-SS Cam Follower and Track Roller - Stud Type | manufacturer upc number:717905058950; sleeve bearing type:Plain Sleeve; maximum pv value:75000; material specification:SAE 660 (C932&#; groove/plug type:None; standards met:83-7-7-3, ASTM B505,; d:1/4 in; maximum v value:750 fp/min; Weight:0.01 lb; bearing material:Cast Bronze C93200 &; |
| SMITH CR-1/2-A-XBC Cam Follower and Track Roller - Stud Type | D:150 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Da max:139 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; d1:95.1 mm; Fatigue limit load, Cu:2.95 kN; da min:71 mm; d:60 mm; ra max:2 mm; Mass:2.87 kg; |
SMITH MYR-30 Cam Follower and Track Roller - Yoke Type Video