| No. | Brand | C | R | F | H | J | b | S | a |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| MCR-47-B | SMITH | - | - | - | - | 132 mm | - | 21.4 mm | - |
| PYR-6 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-80-SBC | SMITH | - | - | - | - | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| YR-3-1/4-C | SMITH | 113.36 kN | - | - | 190 mm | - | - | - | - |
| CR-5/8-C | SMITH | 52.5 kN | - | - | - | - | - | - | - |
| MCRV-72-BC | SMITH | 31.85 kN | - | - | 52.4 mm | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MYR-25-SC | SMITH | 52.5 kN | - | - | - | - | - | 25.4 mm | - |
| YAG-28 | SMITH | 14 kN | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-72 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-85-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| DYR-6 | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
| YAF-08 | SMITH | - | - | - | - | - | - | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2-B | SMITH | - | - | - | - | - | - | - | - |
| HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
| BCR-3/4-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-3/4-BC | SMITH | - | - | - | - | 90 mm | - | - | - |
| SMITH HR-4-B Cam Follower and Track Roller - Stud Type | d:1-3/4 in; maximum pv value:50000; D:2 in; maximum p value:Static 8000 / Dynamic 2000 (psi); overall length:1 in; maximum v value:1200 (sfm); sleeve bearing type:Plain Sleeve; material specification:Oilite®, Synthetic Performance Difference®; bearing material:Oil-Impregnated Bronze; standards met:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; groove/plug type:None; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH MCRV-47-BC Cam Follower and Track Roller - Stud Type | Dz:110 mm; G:M6x1; Designation of closed end cover:SCCE211; Weight:3.36 kg; B:55.4 mm; J:184 mm; N:19mm; L:130 mm; Designation of housing:FL211N-; A1:18 mm; |
| SMITH MCR-47-B Cam Follower and Track Roller - Stud Type | S:21.4 mm; A1:10 mm; Designation of bearing:EX209G2L4; A2:44.9 mm; Designation of housing:FC209-; B:42.8 mm; d1:62 mm; J:132 mm; d:45 mm; G:M6x1; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH BCR-1/2-B Cam Follower and Track Roller - Stud Type | Designation of bearing:US209G2; Weight:1.75 kg; L1:29 mm; Recommended tightening torque for set screw:11.5 Nm; B:41.2 mm; A1:32 mm; C:31.85 kN; T min.:-20 °C; s1:20.6 mm; T max.:100 °C; |
| SMITH YR-3/4-X-SS Cam Follower and Track Roller - Yoke Type | seal type:Felt Seal; D:4.8750 to 5.8750 in; duty type:Normal Duty; bolt size:14 mm; lubrication type:Lubrication Fitting; locking device:Skwezloc; bore type:Round; B:2.0000 in; expansion type:Non-Expansion Bearin; housing material:Cast Iron; |
| SMITH PCR-4-1/2 Cam Follower and Track Roller - Stud Type | overall height:6.6300 in; seal type:Triple-lip contactin; radial static load capacity:48600 lbs; duty type:Heavy Duty; manufacturer catalog:Click here; housing construction:Solid Housing; bolt size:0.6250 in; B:6.6300 in; D:5.3800 in; manufacturer upc number:883450161602; |
| SMITH MFCR-72 Cam Follower and Track Roller - Stud Type | Grease Reference Speed:9300 rpm; Bore Size d:35 mm; Features:Open; C0r - Static Load Rating:19.2 kN; Oil Reference Speed:13000 rpm; Clearance:C3; Weight:0.45 Kg; Outside Diameter D:80.000 mm; Outside Ring Width B:21.000 mm; Cr - Dynamic Load Rating:33.4 kN; |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH MCR-85-SBC Cam Follower and Track Roller - Stud Type | head type:Slotted; roller diameter:2.5000 in; thread size:1-14; roller material:Steel; roller width:1.5000 in; stud diameter:1.0000 in; roller shape:Flat; stud type:Standard; closure type:Sealed; stud length:2.2500 in; |
| SMITH BCR-7/8 Cam Follower and Track Roller - Stud Type | series:300; housing width:1-27/32 in; expansion type:Expansion Bearing &#; housing material:Steel; lubrication type:Lubrication Fitting; radial static load capacity:7110 lb; bearing material:Steel; inner ring width:2-19/32 in; seal type:Clearance/Non-C; maximum rpm:6200 RPM; |
| SMITH CR-2-1/4-XBE Cam Follower and Track Roller - Stud Type | Designation of closed end cover:SCC211; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; Z:62.8 mm; Designation of bearing:UC211-35G2; Weight:3.44 kg; C0:29.2 kN; A1:18 mm; T max.:100 °C; C:43.55 kN; |
| SMITH HR-1-3/4-XBC Cam Follower and Track Roller - Stud Type | G:R1/8"; N:14mm; Designation of housing:FLZ209-; C:31.85 kN; A2:54.9 mm; A:36.5 mm; J:148.5 mm; s1:39.7 mm; d1:62 mm; H:180 mm; |
SMITH HR-1-1/2-C Cam Follower and Track Roller - Stud Type Video