| SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type | maximum rpm:5000 rpm; B:0.8750 in; cage material:Steel; series:RS - Multi-Rol; static load capacity:11500 lbs; operating temperature range:-20F to 250 °F; bearing material:Chrome Steel; flanges:No Flange; standards met:ABMA, ISO; precision rating:Not Rated; |
| SMITH CR-2-1/2-XC Cam Follower and Track Roller - Stud Type | C1:5 mm; B1:48.3 mm; B2:15.9 mm; T max.:100 °C; C0:11.2 kN; m:6 mm; S:18.2 mm; Weight:0.41 kg; G:M8x1; C:19 mm; |
| SMITH MCRV-52-S Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:7540 lb; radial static load capacity:6570 lb; series:200; mounting:Two-Bolt Base; seal type:Contact/Lip; bore type:Round; housing material:Cast Iron; overall height:5.0000 in; expansion type:Non-Expansion Bearin; maximum rpm:3200 RPM; |
| SMITH PYR-6 Cam Follower and Track Roller - Yoke Type | Radial clearance class:CN; Characteristic cage frequency, FTF:0.41 Hz; Brand:SNR; Static load, C0:5.9 kN; Nref:15,000 rpm; rs min:0.6 mm; D:47 mm; Dynamic load, C:9.9 kN; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:4.12 Hz; |
| SMITH CR-2-1/4-BC Cam Follower and Track Roller - Stud Type | finish/coating:Uncoated; lubrication hole type:No Hole; material:Chrome Steel; manufacturer upc number:053893362687; compatible cone:67388, 67389, 67391,; flange type:Non-Flanged Cup; D:7.7500 in; single or double cup:Single Cup; cup width:1.5000 in; abma precision rating:Class 2; |
| SMITH HR-1/2-X Cam Follower and Track Roller - Stud Type | manufacturer upc number:793699130386; seal type:Contact Seal; d:2.9375 in; housing material:Cast Iron; series:200; mounting type:Four-Bolt Flange; duty type:Standard Duty; locking device:Set Screw; |
| SMITH DYR-6 Cam Follower and Track Roller - Yoke Type | compatible bore diameter:3 in, 2-11/16 i; material:Steel; end cap type:Closed End Cap; |
| SMITH MYR-15 Cam Follower and Track Roller - Yoke Type | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:9.988; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Eccentric Collar; Housing Style:4 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22215; Seals:Triple Lip Nitrile Rubber; |
| SMITH CR-1-7/8-XBE Cam Follower and Track Roller - Stud Type | radial static load capacity:26000 lb; base width:2.19 in; duty type:Heavy Duty; base to bore centerline:2.3750 in; locking device:Concentric Collar; bore type:Round; expansion type:Expansion Bearing &#; overall length:8.0000 in; finish/coating:Black Oxide; housing construction:Split Pillow Block; |
| SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
| SMITH MCRV-62 Cam Follower and Track Roller - Stud Type | overall length:73 mm; compatible shaft diameter:135 mm; compatible bearing number:23028; thread size:M150x2 mm; taper:1:12; series:AH(X)30; |
| SMITH MYR-25-SC Cam Follower and Track Roller - Yoke Type | SW:4.76 mm; G:M6x1; C0:32.8 kN; A5:39.7 mm; T min.:-20 °C; C:52.5 kN; Weight:2.45 kg; s1:32.55 mm; S:25.4 mm; T max.:200 °C; |
| SMITH CR-3/4-X Cam Follower and Track Roller - Stud Type | Weight:176.2 lb; D - Bearing O.D.:50.5000 in; Bearing Type:Thrust Tapered Rolle; d - Bore Diameter:45.7500 in; B:2.0625 in; Bearing Configuration:Thrust TTHD - with c; Static Load Rating:4280000 lbf; R - Fillet Radius Shaft (Max):0.13 in; Dynamic Load Rating:139000 lbf; r - Fillet Radius Housing (Max):0.13 in; |
| SMITH MYR-50-C Cam Follower and Track Roller - Yoke Type | Series:15000; C - Cup Width:15.875 mm; B - Cone Width:20.638 mm; a - Effective Center Location3:-5.8 mm; Da - Cup Frontface Backing Diameter:59.44 mm; G1 - Heat Generation Factor (Roller-Raceway):14.6; e - ISO Factor8:0.35; Y - ISO Factor9:1.71; D:63.500 mm; da - Cone Frontface Backing Diameter:31.5 mm; |