| SMITH MFYR-80 Cam Follower and Track Roller - Yoke Type | Support Type:Four-Bolt Plummer Bl; Bearing Type:Split Cylindrical Re; Series Type:Light Series; Bearing - Housing - Seal:LSE1200BRHKPS; Dimension H2:27.0 in; Bearing - Housing - Seal UPC:013992095428; Ca - Axial Load Rating:17580 lbf; Dimension L:32.0 in; Dimension H:13.504 in; Dimension H1:2.0 in; |
| SMITH MCRV-80-SBC Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:22200; overall height:5-1/4 in; D:35 in; series:22200; compatible bore diameter:1-15/16 in; base width:4-1/2 in; travel:18 in; frame type:One-Piece Saddle Mou; bolt center-to-center width:2-1/2 in; overall length:37 in; |
| SMITH IRR-1-1/2 Needle Non Thrust Roller Bearings | operating temperature range:Maximum of +250; finish/coating:Uncoated; series:S; hanger unit type:Conveyor Hanger Unit; d:2 in; manufacturer product page:Click here; bearing material:Moly-Filled Nylon; bearing style:220; locking device:None; |
| SMITH BCR-1-5/8-C Cam Follower and Track Roller - Stud Type | N:12mm; T min.:-20 °C; G:M6x1; e:10 mm; L:125 mm; T max.:100 °C; C0:11.2 kN; d1:44.1 mm; A:31 mm; d:31.75 mm; |
| SMITH YR-3-1/4-C Cam Follower and Track Roller - Yoke Type | T max.:100 °C; C:113.36 kN; SW:6.35 mm; s1:41 mm; H:190 mm; A5:50 mm; d:76.2 mm; A3:4 mm; T min.:-20 °C; B:82 mm; |
| SMITH YR-1-3/8 Cam Follower and Track Roller - Yoke Type | series:70P; maximum p value:24.5;Static 137; thickness:1.5 mm; operating temperature range:-40 to +248 &de; standards met:RoHS; material:Multi-layer Oil-Impr; additional details:Lead Free; material specification:Drymet ST; maximum pv value:3.25 N/mm2 x m&; overall length:470 mm; |
| SMITH MYRV-25-C Cam Follower and Track Roller - Yoke Type | B:0.3125 in; standards met:AISI 52100; axial dynamic load capacity:2560 lb; radial static load capacity:3170 lb; bearing material:Steel; precision rating:ABEC 1 (ISO Cla; internal clearance:C0; axial static load capacity:7920 lb; finish/coating:Uncoated; inside diameter:7.5000 in; |
| SMITH MVCR-76 Cam Follower and Track Roller - Stud Type | Y2 - Geometry Factor:4.31; Dimension A:4.00 in; Dimension R:0.32 in; Shaft Size Type:Metric; Shaft Tolerance:0.0030 in; UPC Code:0883450093620; Housing Style:Four-Bolt Pillow Blo; Eng Internal Radial Clearance - Max:0.0039; Dimension H:1.50 in; Grease Lubrication - M/N Seal:1400 rpm; |
| SMITH MCRV-62 Cam Follower and Track Roller - Stud Type | overall length:73 mm; compatible shaft diameter:135 mm; compatible bearing number:23028; thread size:M150x2 mm; taper:1:12; series:AH(X)30; |
| SMITH MCR-26-SB Cam Follower and Track Roller - Stud Type | Designation of housing:FA207N-; N:15mm; Z:30 mm; B:42.9 mm; A2:44.4 mm; C0:15.2 kN; C:25.7 kN; J:130 mm; Weight:1.28 kg; Recommended tightening torque for set screw:8 Nm; |
| SMITH BYR-1-7/8-XC Cam Follower and Track Roller - Yoke Type | maximum rpm:2900 RPM; D:8.8750 in; bolt size:0.8750 in; series:200; bore type:Round; housing material:Cast Iron; length through bore:2.2656 in; seal type:Contact/Lip; manufacturer upc number:662864715546; mounting:Two-Bolt Base; |
| SMITH HR-3-1/2-XBC Cam Follower and Track Roller - Stud Type | d:1.3750 in; housing material:Cast Iron; D:3.6250 in; locking device:Set Screw; B:4.5938 in; expansion type:Non-Expansion Bearing (Fixed); overall height:1.6400 in; seal type:RST; bore type:Round; bolt size:0.4375 in; duty type:Standard Duty; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; replacement bearing:FHS207-22G; |
| SMITH CR-2-XC Cam Follower and Track Roller - Stud Type | radial static load capacity:1080 lbf; seal type:Contact Seal; mounting type:Two-Bolt Flange; bore type:Round; housing material:Malleable Iron - Nic; d:1.2500 in; length through bore:0.866 in; D:3.9375 in; series:BLCTE200NP; radial dynamic load capacity:2150 lbf; |
| SMITH IRR-1-7/16 Needle Non Thrust Roller Bearings | Fatigue limit load, Cu:3.35 kN; a:10.4 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1; r1s min:1 mm; C:12 mm; Y2:2.11; rs min:1 mm; Characteristic inner ring frequency, BPFI:7.35 Hz; Da min:40 mm; |