| SMITH MCR-90 Cam Follower and Track Roller - Stud Type | flange mounting type:Four-Bolt Piloted; seal type:Triple Barrier Seal; bolt size:0.4375 in; finish/coating:E-coat; manufacturer upc number:053893778464; operating temperature range:-30 to +180 &de; series:E-PF-TRB; pilot diameter:4.2500 in; lubrication type:Lubrication Fitting; B:6.1250 in; |
| SMITH MCR-26-SB Cam Follower and Track Roller - Stud Type | Designation of housing:FA207N-; N:15mm; Z:30 mm; B:42.9 mm; A2:44.4 mm; C0:15.2 kN; C:25.7 kN; J:130 mm; Weight:1.28 kg; Recommended tightening torque for set screw:8 Nm; |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH CR-2-1/4-B Cam Follower and Track Roller - Stud Type | manufacturer catalog number:701903; bore type:Round; replacement bearing:AR-2-23; locking device:Set Screw; base width:3.1250 in; bolt size:.7500 in; operating temperature range:Max 250°; base to bore centerline:2.7500 in; finish/coating:Uncoated; mounting:Two-Bolt Base; |
| SMITH CR-2-XC Cam Follower and Track Roller - Stud Type | radial static load capacity:1080 lbf; seal type:Contact Seal; mounting type:Two-Bolt Flange; bore type:Round; housing material:Malleable Iron - Nic; d:1.2500 in; length through bore:0.866 in; D:3.9375 in; series:BLCTE200NP; radial dynamic load capacity:2150 lbf; |
| SMITH IRR-1-1/2 Needle Non Thrust Roller Bearings | operating temperature range:Maximum of +250; finish/coating:Uncoated; series:S; hanger unit type:Conveyor Hanger Unit; d:2 in; manufacturer product page:Click here; bearing material:Moly-Filled Nylon; bearing style:220; locking device:None; |
| SMITH YAG-12 Cam Follower and Track Roller - Yoke Type | A:18 mm; J:78 mm; d1:32.4 mm; L:100 mm; B:34 mm; C:12.8 kN; e:2 mm; d:12 mm; A2:28.5 mm; T max.:100 °C; |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |
| SMITH MCRV-72-BC Cam Follower and Track Roller - Stud Type | L:197.5 mm; C:31.85 kN; H2:106.4 mm; B:42.8 mm; d:44.45 mm; C0:20.8 kN; B1:56.3 mm; Weight:2.57 kg; Designation of bearing:EX209-28G2L4; H:52.4 mm; |
| SMITH BCR-5/8 Cam Follower and Track Roller - Stud Type | Dynamic load, C:2,200 kN; D1:312.9 mm; Nref:1,200 rpm; Nlim:1,800 rpm; Radial clearance class:C4; da min:187 mm; Fatigue limit load, Cu:175 kN; b:20.3 mm; ra max:3 mm; d2:236 mm; |
| SMITH CR-4-XC Cam Follower and Track Roller - Stud Type | maximum rpm:3000 RPM; radial static load capacity:9838 lb; length through bore:2.85 in; bore type:Round; B:7.3800 in; series:214; radial dynamic load capacity:13994 lb; D:5.8750 in; locking device:Concentric Collar; duty type:Medium Duty; |
| SMITH CR-2-1/4-XBE Cam Follower and Track Roller - Stud Type | Designation of closed end cover:SCC211; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; Z:62.8 mm; Designation of bearing:UC211-35G2; Weight:3.44 kg; C0:29.2 kN; A1:18 mm; T max.:100 °C; C:43.55 kN; |
| SMITH CR-9/16-XBE Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):8110; Cone Part Number:M272749; Cg - Geometry Factor:0.26; Db - Cup Backface Backing Diameter:632.97 mm; Ab - Cage-Cone Frontface Clearance:10.4 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:839000 lbf; Design Units:Imperial; e - ISO Factor8:0.33; Cage Type:Pin-Type; R - Cone Backface To Clear Radius1:6.35 mm; |
| SMITH CR-2-SS Cam Follower and Track Roller - Stud Type | Cone Part Number:495AX; Y1 - ISO Factor9:1.52; D:5.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6850 lbf; Cup Part Number:493D; C - Double Cup Width:2.125 in; d:3 in; Y2 - ISO Factor10:2.26; Cg - Geometry Factor12:0.125; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9000 lbf; |