No. | Brand | C | R | F | H | J | b | S | a |
NUKR-30 | SMITH | 43.55 kN | - | - | 63.5 mm | 176 mm | - | - | - |
CR-1-1/4-XB-SS | SMITH | - | - | - | - | - | - | - | - |
CR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
BCR-1-5/8-C | SMITH | - | - | - | - | - | - | - | - |
BCR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
BCR-7/8-C | SMITH | - | - | - | - | - | - | - | - |
BCR-1-1/8-BC | SMITH | - | - | - | - | - | - | - | - |
HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
YAG-12 | SMITH | 12.8 kN | - | - | - | 78 mm | - | - | - |
CR-3 | SMITH | - | - | - | - | - | - | - | - |
MCR-90 | SMITH | - | - | - | - | - | - | - | - |
MPCR-35 | SMITH | - | - | - | - | - | - | - | - |
DYR-6 | SMITH | - | - | - | - | - | - | - | - |
CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
CR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
MCR-80-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
CR-2-1/4-BC | SMITH | - | - | - | - | - | - | - | - |
PCR-4-1/2 | SMITH | - | - | - | - | - | - | - | - |
CR-1-5/8-X | SMITH | - | - | 153.5 mm | - | - | - | - | - |
HR-1-7/8-XC | SMITH | - | - | - | - | 170 mm | - | - | - |
MCRV-26 | SMITH | - | - | - | - | 99 mm | - | 17.4 mm | - |
PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
BCR-1-3/4-BC | SMITH | - | - | - | - | 90 mm | - | - | - |
SMITH CR-3/4-BC-SS Cam Follower and Track Roller - Stud Type | Housing Width:6.5 in; Dimension H :6-5/16 in; Series Type:Light Series; Dimension L :21-3/4 in; Seal Type:Viton Single Lip; Bearing UPC:013992028563; Bolt Size:4 x 1; Dimension K :3-3/4 in; Cor - Static Load Rating:131675 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; |
SMITH HR-1-3/4-XBC Cam Follower and Track Roller - Stud Type | G:R1/8"; N:14mm; Designation of housing:FLZ209-; C:31.85 kN; A2:54.9 mm; A:36.5 mm; J:148.5 mm; s1:39.7 mm; d1:62 mm; H:180 mm; |
SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
SMITH IRR-1-7/16 Needle Non Thrust Roller Bearings | Fatigue limit load, Cu:3.35 kN; a:10.4 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1; r1s min:1 mm; C:12 mm; Y2:2.11; rs min:1 mm; Characteristic inner ring frequency, BPFI:7.35 Hz; Da min:40 mm; |
SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
SMITH CR-1-3/4-BC Cam Follower and Track Roller - Stud Type | Dimension M:6.0 in; Maximum Speed:1820 rpm; Dimension H:7.520 in; Support Type:Four-Bolt Plummer Bl; Bearing - Housing - Seal:HSE311BRH; Dimension L:20.2 in; Bearing Number:HSE311BR; Housing Width:7.9 in; Bearing Type:Split Cylindrical Re; Shaft Size:3-11/16 in; |
SMITH BCR-5/8 Cam Follower and Track Roller - Stud Type | Dynamic load, C:2,200 kN; D1:312.9 mm; Nref:1,200 rpm; Nlim:1,800 rpm; Radial clearance class:C4; da min:187 mm; Fatigue limit load, Cu:175 kN; b:20.3 mm; ra max:3 mm; d2:236 mm; |
SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type | housing material:Cast Iron; bore type:Round; base width:2-1/4 in; mounting:Two-Bolt Base; locking device:Set Screw; d:1.2500 in; series:UCEP200; radial dynamic load capacity:5820 lbf; duty type:Normal Duty; B:2-1/4 in; |
SMITH MCRV-85-C Cam Follower and Track Roller - Stud Type | head diameter:1.7500 in; lubrication:Grease; operating temperature range:Max 350°; axial static load capacity:1130 lb; series:TM; ball material:Alloy Steel - heat t; shank thread size:3/4-16; lubrication type:With Lubrication Fit; housing material:Carbon Steel - corro; misalignment angle:7 °; |
SMITH PCR-2-1/4-E Cam Follower and Track Roller - Stud Type | J:78 mm; L:60 mm; S:12.7 mm; G:M6x1; Dz:54 mm; s1:15.5 mm; C0:6.65 kN; Z:37 mm; A:25.5 mm; H:102 mm; |
SMITH MYR-20-C Cam Follower and Track Roller - Yoke Type | S:8.5 mm; J:82.6 mm; C:25.7 kN; N:M10; L1:22.5 mm; Designation of bearing:US207G2T04; Dz:80 mm; C0:15.2 kN; A:45 mm; B:32 mm; |
SMITH VYR-8-1/2 Cam Follower and Track Roller - Yoke Type | L:2.323 in; Threads No. per Inch:12; d:3.543 in; A:3.950 in; Taper:1:12; G:0.413 in; Major Dia - B:4.325 in; F:0.115 in; Weight:2.00 lb; |
SMITH CR-9/16-XBE Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):8110; Cone Part Number:M272749; Cg - Geometry Factor:0.26; Db - Cup Backface Backing Diameter:632.97 mm; Ab - Cage-Cone Frontface Clearance:10.4 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:839000 lbf; Design Units:Imperial; e - ISO Factor8:0.33; Cage Type:Pin-Type; R - Cone Backface To Clear Radius1:6.35 mm; |
BCR-7/8-X | Non Metallic Bushing Cam Follower Stud Type ...
Smith Bearing BCR-7/8-X. Non Metallic Bushing Cam Follower Stud Type Screwdriver slot Sealed. Item #106390370. each. Shipment Options. One Time Shipment.
smith bearing bcr-1-7/8-c
Looking for SMITH BEARING BCR-1-7/8-C BEARING? Price $49.56 + Free Shipping! Easy online ordering with 24/7 expert product support.
Non-Metallic Bushing Cam Follower, BCR-1-7/8-C - Zoro ...
Smith Bearing. Non-Metallic Bushing Cam Follower, BCR-1-7/8-C. Zoro #: G8363110; Mfr #: BCR-1-7/8-C. 0.0. Rated 0 out of 5 stars.
smith bearing bcr-7/8 - Cam Follower and Track Roller - BDI
7/8" Roller Diameter; 1/2" Roller Width; Flat Roller Surface Profile; 3/8" Stud Diameter; 3/8-24 Thread Size; Standard Stud Stud Profile; Open Enclosure; ...
BCR-7/8-C Cam Followers - Smith & Lily Interchange - 养贞轴承
Smith Part No. BCR-7/8-C. LILY Part No. LBCR-7/8-C. Cross Reference, Smith. System of Measurement, Inch. Roller style, Stud Type. Roller Dia, 0.875".
Smith BCR-1-7/8-C Crowned & Flat Cam Followers Bearings
Various Crowned & Flat Cam Followers Bearings types and sizes to ASTING Bearings LLC accommodate your Smith BCR-1-7/8-C Crowned & Flat Cam Followers ...
Detail - Smith Bearing
SMITH Bearing® Number, BCR-7/8-C. (P) Lube Fitting Size, 3/16. (H) Oil Hole Dia. 3/32. (N) Oil Hole Location, 1/4. Recom. Bore .375.
SMITH BCR-7/8-C Cam Follower and Track Roller - Stud Type Video