| No. | Brand | C | R | F | H | J | b | S | a |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-5/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-XC | SMITH | 19 mm | - | - | - | - | - | 18.2 mm | - |
| MYR-20-C | SMITH | 25.7 kN | - | - | - | 82.6 mm | - | 8.5 mm | - |
| DYR-6 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-S | SMITH | - | - | - | - | - | - | - | - |
| MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
| MCR-85-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-XBE | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-3 | SMITH | - | - | - | - | - | - | - | - |
| VCR-5-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-BC | SMITH | - | - | - | 90 mm | - | - | - | - |
| CR-2-1/4-BC | SMITH | - | - | - | - | - | - | - | - |
| HR-4-B | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2-B | SMITH | - | - | - | - | - | - | - | - |
| NUKR-30 | SMITH | 43.55 kN | - | - | 63.5 mm | 176 mm | - | - | - |
| MCR-90-C | SMITH | 122.85 kN | - | - | - | - | - | 40.5 mm | - |
| CR-1-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MCRV-85-C | SMITH | - | - | - | - | - | - | - | - |
| VYR-8-1/2 | SMITH | - | - | 0.115 in | - | - | - | - | - |
| HR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| MYR-15 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4-XBC | SMITH | 31.85 kN | - | - | 180 mm | 148.5 mm | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-3/8-B Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; Weight:1.076 lbs; harmonization code:3926904590.US; maximum shaft surface speed:12000 fpm; pressure tolerance:Ambient; shaft diameter:1.7500 in; width:0.6250 in; D:2.7970 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; |
| SMITH CR-3 Cam Follower and Track Roller - Stud Type | Z:42.9 mm; G:M6x1; A:30 mm; T max.:200 °C; Designation of open end cover:SCOU203-11; L1:38 mm; s1:11 mm; Dz:46 mm; Weight:0.44 kg; B:22 mm; |
| SMITH MYRV-50-C Cam Follower and Track Roller - Yoke Type | mounting type:Four-Bolt Piloted; finish/coating:Uncoated; bore type:Round; series:204; D:3.5300 in; d:0.7500 in; seal type:Contact with Flinger; maximum rpm:7500 RPM; radial static load capacity:1482 lb; radial dynamic load capacity:2899 lb; |
| SMITH CR-1/2-A-XBC Cam Follower and Track Roller - Stud Type | D:150 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Da max:139 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; d1:95.1 mm; Fatigue limit load, Cu:2.95 kN; da min:71 mm; d:60 mm; ra max:2 mm; Mass:2.87 kg; |
| SMITH CR-2-1/4-XBE Cam Follower and Track Roller - Stud Type | Designation of closed end cover:SCC211; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; Z:62.8 mm; Designation of bearing:UC211-35G2; Weight:3.44 kg; C0:29.2 kN; A1:18 mm; T max.:100 °C; C:43.55 kN; |
| SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type | maximum rpm:5000 rpm; B:0.8750 in; cage material:Steel; series:RS - Multi-Rol; static load capacity:11500 lbs; operating temperature range:-20F to 250 °F; bearing material:Chrome Steel; flanges:No Flange; standards met:ABMA, ISO; precision rating:Not Rated; |
| SMITH MCRV-85-C Cam Follower and Track Roller - Stud Type | head diameter:1.7500 in; lubrication:Grease; operating temperature range:Max 350°; axial static load capacity:1130 lb; series:TM; ball material:Alloy Steel - heat t; shank thread size:3/4-16; lubrication type:With Lubrication Fit; housing material:Carbon Steel - corro; misalignment angle:7 °; |
| SMITH CR-3/4-C Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:10; finish/coating:Uncoated; travel:12 in; series:TP; |
| SMITH MCRV-35-C Cam Follower and Track Roller - Stud Type | Designation of bearing:US211-32G2T04; H3:125; L:185 mm; A4:30 mm; B:45.3 mm; T max.:100 °C; Dz:110 mm; A2:46.5 mm; Recommended tightening torque for set screw:8 Nm; Z:62.8 mm; |
| SMITH CR-2-1/4-BC Cam Follower and Track Roller - Stud Type | finish/coating:Uncoated; lubrication hole type:No Hole; material:Chrome Steel; manufacturer upc number:053893362687; compatible cone:67388, 67389, 67391,; flange type:Non-Flanged Cup; D:7.7500 in; single or double cup:Single Cup; cup width:1.5000 in; abma precision rating:Class 2; |
| SMITH MCRV-26-B Cam Follower and Track Roller - Stud Type | series:9000; inner ring width:4-1/4 in; expansion type:Non-Expansion Bearin; bearing type:Spherical Roller; maximum rpm:1400 RPM; housing width:3-7/16 in; lubrication type:Lubrication Fitting; D:6-3/4 in; radial dynamic load capacity:82000 lb; finish/coating:Powder Coated; |
| SMITH CR-4-XC Cam Follower and Track Roller - Stud Type | maximum rpm:3000 RPM; radial static load capacity:9838 lb; length through bore:2.85 in; bore type:Round; B:7.3800 in; series:214; radial dynamic load capacity:13994 lb; D:5.8750 in; locking device:Concentric Collar; duty type:Medium Duty; |
| SMITH CR-1-5/8-XBC-SS Cam Follower and Track Roller - Stud Type | radial static load capacity:764800 lbf; misalignment angle:10 °; lubrication type:Requires Lubrication; outer ring width:3.3750 in; operating temperature range:Max 300 °F; D:7.0000 in; Weight:26.164 lbs; inner ring width:4.2250 in; manufacturer product page:Click here; series:RBC®; |
| SMITH CR-1-3/4-XB Cam Follower and Track Roller - Stud Type | Z:64 mm; s1:30.5 mm; Dz:54 mm; d1:32.4 mm; A5:17 mm; L1:225 mm; Weight:1.69 kg; Designation of open end cover:SCOE204-20; B:34 mm; L:264 mm; |
SMITH CR-1/2-XBC-SS Cam Follower and Track Roller - Stud Type Video