| No. | Brand | C | R | F | H | J | b | S | a |
| MYR-25-SC | SMITH | 52.5 kN | - | - | - | - | - | 25.4 mm | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-80-SBC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MPCR-35 | SMITH | - | - | - | - | - | - | - | - |
| VCR-5-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-SS | SMITH | - | - | - | - | - | - | - | - |
| MFYR-80 | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MYR-50-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-4-XC | SMITH | - | - | - | - | - | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-S | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-B | SMITH | 31.85 kN | - | - | - | - | - | - | - |
| HR-3-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| VYR-8-1/2 | SMITH | - | - | 0.115 in | - | - | - | - | - |
| MCR-72 | SMITH | - | - | - | - | - | - | - | - |
| PYR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-C | SMITH | 52.5 kN | - | - | - | - | - | - | - |
| DYR-6 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-47-B | SMITH | - | - | - | - | 132 mm | - | 21.4 mm | - |
| SMITH YR-3/4-X-SS Cam Follower and Track Roller - Yoke Type | seal type:Felt Seal; D:4.8750 to 5.8750 in; duty type:Normal Duty; bolt size:14 mm; lubrication type:Lubrication Fitting; locking device:Skwezloc; bore type:Round; B:2.0000 in; expansion type:Non-Expansion Bearin; housing material:Cast Iron; |
| SMITH MYR-20-C Cam Follower and Track Roller - Yoke Type | S:8.5 mm; J:82.6 mm; C:25.7 kN; N:M10; L1:22.5 mm; Designation of bearing:US207G2T04; Dz:80 mm; C0:15.2 kN; A:45 mm; B:32 mm; |
| SMITH MCR-80-B Cam Follower and Track Roller - Stud Type | L2:13 mm; C:25.7 kN; d1:51.1 mm; L:129 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; H1:89 mm; L3:64 mm; Dz:80 mm; |
| SMITH CR-5/8-X-SS Cam Follower and Track Roller - Stud Type | assembly type:Double Row; double outer ring width:3.000 in; manufacturer upc number:053893533063; D:10.0000 in; bearing material:Steel; cup width:3.0000 in; abma precision rating:Class 2; d:6.5000 in; cone width:1.8125 in; |
| SMITH PYR-3-1/2 Cam Follower and Track Roller - Yoke Type | axial static load capacity:147700 lb; axial dynamic load capacity:41970 lb; B:1.0000 in; fillet radius:0.08 in; bearing material:Steel; radial static load capacity:59100 lb; operating temperature range:-65 to +250 &de; standards met:AISI 52100; closure type:Open; D:37.0000 in; |
| SMITH CR-3/4-BC-SS Cam Follower and Track Roller - Stud Type | Housing Width:6.5 in; Dimension H :6-5/16 in; Series Type:Light Series; Dimension L :21-3/4 in; Seal Type:Viton Single Lip; Bearing UPC:013992028563; Bolt Size:4 x 1; Dimension K :3-3/4 in; Cor - Static Load Rating:131675 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |
| SMITH HR-7/8-X Cam Follower and Track Roller - Stud Type | B:2.7969 in; flange mounting type:Three-Bolt Triangle; housing construction:Solid Housing; housing material:Aluminum; compatible bore diameter:1.0000 in, 0.8750 in; D:3.0000 in; series:LF; |
| SMITH IRR-1-7/16 Needle Non Thrust Roller Bearings | Fatigue limit load, Cu:3.35 kN; a:10.4 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1; r1s min:1 mm; C:12 mm; Y2:2.11; rs min:1 mm; Characteristic inner ring frequency, BPFI:7.35 Hz; Da min:40 mm; |
| SMITH VYR-8-1/2 Cam Follower and Track Roller - Yoke Type | L:2.323 in; Threads No. per Inch:12; d:3.543 in; A:3.950 in; Taper:1:12; G:0.413 in; Major Dia - B:4.325 in; F:0.115 in; Weight:2.00 lb; |
| SMITH CR-1-5/8-B Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.41 Hz; Keyword String:Ball; rs min:1.5 mm; Internal Clearance:C0-Medium; UNSPSC:31171504; Dynamic load, C:52.5 kN; Static load, C0:36 kN; Inner Race Width:0 Inch | 0 Millimete; Enclosure:Open; |
| SMITH DCR-1-1/4 Cam Follower and Track Roller - Stud Type | d1:146 mm; A3:4 mm; C0:140 kN; SW:9.52 mm; H:260 mm; G:M10x1; Recommended tightening torque for set screw:65.2 Nm; T max.:200 °C; Designation of bearing:EX320-64G2T20; A5:50 mm; |
| SMITH MUTD-25 Cam Follower and Track Roller - Yoke Type | lip material:Labyrinth; shaft diameter:1.8750 in; Weight:0.204 lb; typical application:Exceptional Bearing; harmonization code:3926904590.US; width:0.6250 in; construction description:ISO-GARD® Flange; continuous temperature range:-22 to 400°F; manufacturer catalog number:29519-0989; maximum shaft surface speed:4500 fpm; |
| SMITH CR-2-1/2-B Cam Follower and Track Roller - Stud Type | T max.:100 °C; H3:90; C0:15.2 kN; Weight:1.37 kg; T min.:-20 °C; C:25.7 kN; L:135 mm; d:36.51 mm; A1:10 mm; A2:32.5 mm; |
SMITH BYR-1-7/8-XC Cam Follower and Track Roller - Yoke Type Video