| No. | Brand | C | R | F | H | J | b | S | a |
| MCR-47-B | SMITH | - | - | - | - | 132 mm | - | 21.4 mm | - |
| YR-3-1/4-C | SMITH | 113.36 kN | - | - | 190 mm | - | - | - | - |
| BCR-2-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
| MPYR-62 | SMITH | - | - | - | - | - | - | - | - |
| MUTD-45100 | SMITH | - | 500 mm | - | - | - | - | - | - |
| MYRV-15-C | SMITH | - | - | - | - | - | - | - | - |
| HR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-40 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8-XC | SMITH | - | - | - | - | 170 mm | - | - | - |
| CR-5/8-C | SMITH | 52.5 kN | - | - | - | - | - | - | - |
| MCR-80-S | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| PYR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| BYR-1-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
| VCR-5-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| CR-3 | SMITH | - | - | - | - | - | - | - | - |
| MYR-50-SC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| MCRV-80-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-X-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH MCRV-80-SBC Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:22200; overall height:5-1/4 in; D:35 in; series:22200; compatible bore diameter:1-15/16 in; base width:4-1/2 in; travel:18 in; frame type:One-Piece Saddle Mou; bolt center-to-center width:2-1/2 in; overall length:37 in; |
| SMITH MCR-80-B Cam Follower and Track Roller - Stud Type | L2:13 mm; C:25.7 kN; d1:51.1 mm; L:129 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; H1:89 mm; L3:64 mm; Dz:80 mm; |
| SMITH MCR-30-C Cam Follower and Track Roller - Stud Type | d:25 mm; series:UCNTPL200MZ2W; overall length:99 mm; overall height:88.5 mm; manufacturer product page:Click here; lubrication type:Lubrication Fitting; seal type:Contact with Slinger; slot spacing:45 mm; slot width:6.4 mm; unit type:Side Mount; |
| SMITH CR-2-SS Cam Follower and Track Roller - Stud Type | Cone Part Number:495AX; Y1 - ISO Factor9:1.52; D:5.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6850 lbf; Cup Part Number:493D; C - Double Cup Width:2.125 in; d:3 in; Y2 - ISO Factor10:2.26; Cg - Geometry Factor12:0.125; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9000 lbf; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH MCR-47-B Cam Follower and Track Roller - Stud Type | S:21.4 mm; A1:10 mm; Designation of bearing:EX209G2L4; A2:44.9 mm; Designation of housing:FC209-; B:42.8 mm; d1:62 mm; J:132 mm; d:45 mm; G:M6x1; |
| SMITH BCR-1/2-B Cam Follower and Track Roller - Stud Type | Designation of bearing:US209G2; Weight:1.75 kg; L1:29 mm; Recommended tightening torque for set screw:11.5 Nm; B:41.2 mm; A1:32 mm; C:31.85 kN; T min.:-20 °C; s1:20.6 mm; T max.:100 °C; |
| SMITH CR-1-X-SS Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; maximum shaft surface speed:12000 fpm; continuous temperature range:-22 to 400°F; misalignment tolerance:0.010 in; lip material:Labyrinth; D:5.1180 in; manufacturer catalog number:29609-5110; pressure tolerance:Ambient; harmonization code:8487900040.US; typical application:Exceptional Bearing; |
| SMITH MFYR-80 Cam Follower and Track Roller - Yoke Type | Support Type:Four-Bolt Plummer Bl; Bearing Type:Split Cylindrical Re; Series Type:Light Series; Bearing - Housing - Seal:LSE1200BRHKPS; Dimension H2:27.0 in; Bearing - Housing - Seal UPC:013992095428; Ca - Axial Load Rating:17580 lbf; Dimension L:32.0 in; Dimension H:13.504 in; Dimension H1:2.0 in; |
| SMITH YAG-32 Cam Follower and Track Roller - Yoke Type | bolt size:0.6250 in; bearing type:Spherical Roller; finish / coating:Powder coat; Weight:17 lbs; bore type:Round; seal type:Triple-lip contactin; housing material:Cast Steel; manufacturer product page:Click here; lubrication type:Lubrication Fitting; locking device:Single V-Lock; |
| SMITH VCR-4-1/2 Cam Follower and Track Roller - Stud Type | Y1 - Geometry Factor:3.14; Dimension L:3.87 in; Dimension D Max:8.40 in; Full Timken Part Number:QAPL15A300SB; C0 - Static Load:54100 lb; Eng Internal Radial Clearance - Min:0.0020; Pre Install Clearance Max:0.0031 in; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension A:3.25 in; Weight:28 lb; |
| SMITH CR-1-3/4-BC-SS Cam Follower and Track Roller - Stud Type | manufacturer upc number:717905058950; sleeve bearing type:Plain Sleeve; maximum pv value:75000; material specification:SAE 660 (C932&#; groove/plug type:None; standards met:83-7-7-3, ASTM B505,; d:1/4 in; maximum v value:750 fp/min; Weight:0.01 lb; bearing material:Cast Bronze C93200 &; |
| SMITH HR-3-1/2-XBC Cam Follower and Track Roller - Stud Type | d:1.3750 in; housing material:Cast Iron; D:3.6250 in; locking device:Set Screw; B:4.5938 in; expansion type:Non-Expansion Bearing (Fixed); overall height:1.6400 in; seal type:RST; bore type:Round; bolt size:0.4375 in; duty type:Standard Duty; lubrication type:Lubrication Fitting; mounting type:Four-Bolt Flange; replacement bearing:FHS207-22G; |
| SMITH PCR-3-E Cam Follower and Track Roller - Stud Type | fillet radius:0.06 in; series:KD; radial dynamic load capacity:2580 lbf; d:6.0000 in; internal clearance:C0; B:0.5000 in; closure type:Open; bearing material:Chrome Steel; precision rating:ABEC 1 (ISO Cla; operating temperature range:-65 to +250 &de; |
HR-BC/HR-XBC Series Heavy Stud Type - Products ...
HR-1-3/4-XBC ; (A) Stud Dia. 1.0000 ; (M) Stud Length, 1-3/4 ; Basic Dynamic Rating (lbs), 7600 ; Max. Static Capacity (lbs), 15870.
HR-1-3/4-XBC Cam Followers - Smith & Lily Interchange
Smith Part No. HR-1-3/4-XBC. LILY Part No. LHR-1-3/4-XBC. Cross Reference, Smith. System of Measurement, Inch. Roller style, Stud Type. Roller Dia, 1.750".
Smith Bearing Hr-1-3/4-Xbc Cam Follower,Crowned ...
Details about Smith Bearing Hr-1-3/4-Xbc Cam Follower,Crowned,Heavy Stud,Hex Sock. Free Shipping on orders over $75. Be the first to write a review.
HR-1-3/4-XBC - Smith Bearing - Applied Industrial Technologies
Smith Bearing HR-1-3/4-XBC. Needle Bearing Cam Follower Heavy Stud Type Hex Head slot Sealed Crowned. Item #106334731. each. Shipment Options.
HR-1-3/4-XBC Heavy Stud Type Hex Head slot Sealed ...
The HR-1-3/4-XBC is produced by Smith Bearings and is described as a HR-1-3/4-XBC Heavy Stud Type Hex Head slot Sealed Crowned Needle Bearing Cam Follower.Brand: Smith BearingsHEX Size: 5/16(B) Roller Width: 1.000Typically ships in: 1 day
smith bearing hr-1-3/4-xbc - Cam Follower and Track Roller
1-3/4" Roller Diameter; 1" Roller Width; Crowned Roller Surface Profile; 1" Stud Diameter; 1-14 Thread Size; Heavy Stud Stud Profile; Sealed Enclosure; ...
Smith Bearing HR-1 3/4-XBC Cam Follower Needle Roller ...
Smith Bearing HR-1 3/4-XBC Cam Follower Needle Roller Bearing, Crowned-Heavy Stud with Hex-Drive Socket, Sealed, 1.750": Amazon.com: Industrial ...Bearing Type: Roller BearingItem Diameter: 1.75 inchesItem Weight: 1 Pounds$44.12 · Out of stock
SMITH HR-1-3/4-XBC Cam Follower and Track Roller - Stud Type Video