| No. | Brand | C | R | F | H | J | b | S | a |
| CR-1-5/8-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| HR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC-SS | SMITH | - | - | - | - | 171 mm | - | 27.7 mm | - |
| VYR-8-1/2 | SMITH | - | - | 0.115 in | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-BC | SMITH | - | - | - | - | 184 mm | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
| PCR-4-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| YR-3/4-X-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4-XBC | SMITH | 31.85 kN | - | - | 180 mm | 148.5 mm | - | - | - |
| MPCR-35 | SMITH | - | - | - | - | - | - | - | - |
| MPYR-200 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-B | SMITH | - | - | - | - | - | - | - | - |
| YAG-12 | SMITH | 12.8 kN | - | - | - | 78 mm | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH CR-4-XC Cam Follower and Track Roller - Stud Type | maximum rpm:3000 RPM; radial static load capacity:9838 lb; length through bore:2.85 in; bore type:Round; B:7.3800 in; series:214; radial dynamic load capacity:13994 lb; D:5.8750 in; locking device:Concentric Collar; duty type:Medium Duty; |
| SMITH BYR-1-7/8-XC Cam Follower and Track Roller - Yoke Type | maximum rpm:2900 RPM; D:8.8750 in; bolt size:0.8750 in; series:200; bore type:Round; housing material:Cast Iron; length through bore:2.2656 in; seal type:Contact/Lip; manufacturer upc number:662864715546; mounting:Two-Bolt Base; |
| SMITH MCRV-85-C Cam Follower and Track Roller - Stud Type | head diameter:1.7500 in; lubrication:Grease; operating temperature range:Max 350°; axial static load capacity:1130 lb; series:TM; ball material:Alloy Steel - heat t; shank thread size:3/4-16; lubrication type:With Lubrication Fit; housing material:Carbon Steel - corro; misalignment angle:7 °; |
| SMITH NUKR-30 Cam Follower and Track Roller - Stud Type | C:43.55 kN; A:60 mm; J:176 mm; B:55.6 mm; L1:68 mm; N1:30 mm; T max.:200 °C; d:55.56 mm; Z:77.7 mm; H:63.5 mm; |
| SMITH MPCR-40 Cam Follower and Track Roller - Stud Type | thread size:M 190x3; series:AH; compatible shaft diameter:170 mm; manufacturer upc number:7316570136128; lock nut number:KM34; taper:1:12; overall length:122 mm; lock washer number:MB34; |
| SMITH HR-3/4-C Cam Follower and Track Roller - Stud Type | B:9 mm; D:37 mm; cage material:Phenolic; closure type:Open; d:20 mm; manufacturer upc number:029176726729; |
| SMITH CR-1/2-XC Cam Follower and Track Roller - Stud Type | assembly type:Cone & Cup; cage material:Steel; manufacturer upc number:053893253251; abma precision rating:Class K; cone width:38 mm; operating temperature range:-65 to +250 &de; cup width:29 mm; flange type:Non-Flanged Cup; finish/coating:Uncoated; d:110 mm; |
| SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
| SMITH YAG-32 Cam Follower and Track Roller - Yoke Type | bolt size:0.6250 in; bearing type:Spherical Roller; finish / coating:Powder coat; Weight:17 lbs; bore type:Round; seal type:Triple-lip contactin; housing material:Cast Steel; manufacturer product page:Click here; lubrication type:Lubrication Fitting; locking device:Single V-Lock; |
| SMITH MCR-47-B Cam Follower and Track Roller - Stud Type | S:21.4 mm; A1:10 mm; Designation of bearing:EX209G2L4; A2:44.9 mm; Designation of housing:FC209-; B:42.8 mm; d1:62 mm; J:132 mm; d:45 mm; G:M6x1; |
| SMITH BCR-2-3/4-XC Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:23000 lb; stud type:Double Row Heavy; roller width:18 mm; stud length:32.5 mm; roller shape:Flat; bearing element:Needle Rollers; closure type:Open; stud diameter:16 mm; roller diameter:35 mm; roller material:Steel; |
| SMITH YR-3/4-X-SS Cam Follower and Track Roller - Yoke Type | seal type:Felt Seal; D:4.8750 to 5.8750 in; duty type:Normal Duty; bolt size:14 mm; lubrication type:Lubrication Fitting; locking device:Skwezloc; bore type:Round; B:2.0000 in; expansion type:Non-Expansion Bearin; housing material:Cast Iron; |
| SMITH CR-1-1/2-XB Cam Follower and Track Roller - Stud Type | H1:112.0 mm; Housing Mass:14 Kg; Material :Cast Iron; L:345.00 mm; A1:100 mm; Shaft Diameter d:2 11/16 in; Bolt Qty:2; Seal Type:V-ring; C0 Static Load Rating:363; Adapter Sleeve1:HA316; |
SMITH MYR-40-SC Cam Follower and Track Roller - Yoke Type Video