| No. | Brand | C | R | F | H | J | b | S | a |
| BCR-5/8 | SMITH | - | - | - | - | - | 20.3 mm | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-XC | SMITH | 19 mm | - | - | - | - | - | 18.2 mm | - |
| HR-1-7/8-XC | SMITH | - | - | - | - | 170 mm | - | - | - |
| HR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
| HR-4-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-30-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-BC | SMITH | - | - | - | 90 mm | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/8-BC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-50-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBE | SMITH | 43.55 kN | - | - | - | - | - | - | - |
| MYRV-15-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-90-C | SMITH | 122.85 kN | - | - | - | - | - | 40.5 mm | - |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-72 | SMITH | - | - | - | - | - | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-XB | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC | SMITH | - | - | - | - | - | - | - | - |
| SMITH MCRV-80-SBC Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:22200; overall height:5-1/4 in; D:35 in; series:22200; compatible bore diameter:1-15/16 in; base width:4-1/2 in; travel:18 in; frame type:One-Piece Saddle Mou; bolt center-to-center width:2-1/2 in; overall length:37 in; |
| SMITH MCRV-52-BC Cam Follower and Track Roller - Stud Type | B:14 mm; manufacturer upc number:029176034961; snap ring included:With Snap Ring; closure type:Open; internal clearance:Normal Clearance; bore type:Round; D:47 mm; d:17 mm; |
| SMITH MCRV-52-S Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:7540 lb; radial static load capacity:6570 lb; series:200; mounting:Two-Bolt Base; seal type:Contact/Lip; bore type:Round; housing material:Cast Iron; overall height:5.0000 in; expansion type:Non-Expansion Bearin; maximum rpm:3200 RPM; |
| SMITH CR-1-5/8-B Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.41 Hz; Keyword String:Ball; rs min:1.5 mm; Internal Clearance:C0-Medium; UNSPSC:31171504; Dynamic load, C:52.5 kN; Static load, C0:36 kN; Inner Race Width:0 Inch | 0 Millimete; Enclosure:Open; |
| SMITH HR-2-1/2-B Cam Follower and Track Roller - Stud Type | outer ring width:1-15/16 in; finish/coating:Uncoated; row type & fill slot:Double-Row Non-Fill; cage material:Steel; series:5200; fillet radius:2 mm; precision rating:Not Rated; maximum rpm:2560 RPM; D:150 mm; internal clearance:C0; |
| SMITH MCR-90 Cam Follower and Track Roller - Stud Type | flange mounting type:Four-Bolt Piloted; seal type:Triple Barrier Seal; bolt size:0.4375 in; finish/coating:E-coat; manufacturer upc number:053893778464; operating temperature range:-30 to +180 &de; series:E-PF-TRB; pilot diameter:4.2500 in; lubrication type:Lubrication Fitting; B:6.1250 in; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
| SMITH CR-2-1/2-B Cam Follower and Track Roller - Stud Type | T max.:100 °C; H3:90; C0:15.2 kN; Weight:1.37 kg; T min.:-20 °C; C:25.7 kN; L:135 mm; d:36.51 mm; A1:10 mm; A2:32.5 mm; |
| SMITH MCRV-72-BC Cam Follower and Track Roller - Stud Type | L:197.5 mm; C:31.85 kN; H2:106.4 mm; B:42.8 mm; d:44.45 mm; C0:20.8 kN; B1:56.3 mm; Weight:2.57 kg; Designation of bearing:EX209-28G2L4; H:52.4 mm; |
| SMITH BCR-5/8-B Cam Follower and Track Roller - Stud Type | bearing material:UHMW-PE; housing material:Stainless Steel; d:1/2 in; mounting:Two-Bolt Base; |
| SMITH BCR-2-3/4-XC Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:23000 lb; stud type:Double Row Heavy; roller width:18 mm; stud length:32.5 mm; roller shape:Flat; bearing element:Needle Rollers; closure type:Open; stud diameter:16 mm; roller diameter:35 mm; roller material:Steel; |
| SMITH CR-1-X-SS Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; maximum shaft surface speed:12000 fpm; continuous temperature range:-22 to 400°F; misalignment tolerance:0.010 in; lip material:Labyrinth; D:5.1180 in; manufacturer catalog number:29609-5110; pressure tolerance:Ambient; harmonization code:8487900040.US; typical application:Exceptional Bearing; |
| SMITH HR-1-3/4-XBC Cam Follower and Track Roller - Stud Type | G:R1/8"; N:14mm; Designation of housing:FLZ209-; C:31.85 kN; A2:54.9 mm; A:36.5 mm; J:148.5 mm; s1:39.7 mm; d1:62 mm; H:180 mm; |
| SMITH MCR-80-S Cam Follower and Track Roller - Stud Type | type:Stepped; material:Steel; length:24 in; |
SMITH YAF-08 Cam Follower and Track Roller - Yoke Type Video