| No. | Brand | C | R | F | H | J | b | S | a |
| MYRV-50-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC-SS | SMITH | - | - | - | - | 171 mm | - | 27.7 mm | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| YAG-12 | SMITH | 12.8 kN | - | - | - | 78 mm | - | - | - |
| BCR-5/8 | SMITH | - | - | - | - | - | 20.3 mm | - | - |
| MCR-26-SB | SMITH | 25.7 kN | - | - | - | 130 mm | - | - | - |
| VCR-4-1/2-E | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBE | SMITH | 43.55 kN | - | - | - | - | - | - | - |
| CR-2-1/4-XBEC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-SS | SMITH | - | - | - | - | - | - | - | - |
| MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| MCR-90-C | SMITH | 122.85 kN | - | - | - | - | - | 40.5 mm | - |
| IRR-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-40-S | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| BCR-7/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| MPYR-62 | SMITH | - | - | - | - | - | - | - | - |
| SMITH MCRV-52-S Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:7540 lb; radial static load capacity:6570 lb; series:200; mounting:Two-Bolt Base; seal type:Contact/Lip; bore type:Round; housing material:Cast Iron; overall height:5.0000 in; expansion type:Non-Expansion Bearin; maximum rpm:3200 RPM; |
| SMITH CR-1-1/2-XB Cam Follower and Track Roller - Stud Type | H1:112.0 mm; Housing Mass:14 Kg; Material :Cast Iron; L:345.00 mm; A1:100 mm; Shaft Diameter d:2 11/16 in; Bolt Qty:2; Seal Type:V-ring; C0 Static Load Rating:363; Adapter Sleeve1:HA316; |
| SMITH MCRV-26 Cam Follower and Track Roller - Stud Type | A:32.5 mm; s1:30.9 mm; T max.:200 °C; B:34.8 mm; T min.:-20 °C; S:17.4 mm; B1:44.3 mm; Weight:0.75 kg; J:99 mm; d:22.22 mm; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | Characteristic rolling element frequency, BSF:10.79 Hz; Characteristic outer ring frequency, BPF0:15.44 Hz; B:25.5 mm; D:47 mm; G:M20X1.5; R:500 mm; B3:9 mm; Minimum Buy Quantity:N/A; Product Group:B04120; Min operating temperature, Tmin:-20 °C; |
| SMITH CR-3/4-X Cam Follower and Track Roller - Stud Type | Weight:176.2 lb; D - Bearing O.D.:50.5000 in; Bearing Type:Thrust Tapered Rolle; d - Bore Diameter:45.7500 in; B:2.0625 in; Bearing Configuration:Thrust TTHD - with c; Static Load Rating:4280000 lbf; R - Fillet Radius Shaft (Max):0.13 in; Dynamic Load Rating:139000 lbf; r - Fillet Radius Housing (Max):0.13 in; |
| SMITH CR-4-XC Cam Follower and Track Roller - Stud Type | maximum rpm:3000 RPM; radial static load capacity:9838 lb; length through bore:2.85 in; bore type:Round; B:7.3800 in; series:214; radial dynamic load capacity:13994 lb; D:5.8750 in; locking device:Concentric Collar; duty type:Medium Duty; |
| SMITH MCRV-47-BC Cam Follower and Track Roller - Stud Type | Dz:110 mm; G:M6x1; Designation of closed end cover:SCCE211; Weight:3.36 kg; B:55.4 mm; J:184 mm; N:19mm; L:130 mm; Designation of housing:FL211N-; A1:18 mm; |
| SMITH BCR-1-5/8-C Cam Follower and Track Roller - Stud Type | N:12mm; T min.:-20 °C; G:M6x1; e:10 mm; L:125 mm; T max.:100 °C; C0:11.2 kN; d1:44.1 mm; A:31 mm; d:31.75 mm; |
| SMITH MPYR-62 Cam Follower and Track Roller - Yoke Type | radial static load capacity:16100 lbf; radial dynamic load capacity:21500 lbf; D:6.7500 in; bore type:Round; locking device:Set Screw; housing material:Cast Iron; expansion type:Non-Expansion Bearin; length through bore:3.780 in; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; |
| SMITH CR-2-1/4-XBEC Cam Follower and Track Roller - Stud Type | overall length:13.0000 in; expansion type:Non-Expansion Bearin; duty type:Heavy Duty; finish/coating:Powder Coat; radial static load capacity:87200 lbs; bearing type:Spherical Roller; bolt size:0.8750 in; base height:1.8800 in; base width:3.4100 in; series:QMPL; |
| SMITH YR-1-3/8 Cam Follower and Track Roller - Yoke Type | series:70P; maximum p value:24.5;Static 137; thickness:1.5 mm; operating temperature range:-40 to +248 &de; standards met:RoHS; material:Multi-layer Oil-Impr; additional details:Lead Free; material specification:Drymet ST; maximum pv value:3.25 N/mm2 x m&; overall length:470 mm; |
| SMITH CR-1-X-SS Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; maximum shaft surface speed:12000 fpm; continuous temperature range:-22 to 400°F; misalignment tolerance:0.010 in; lip material:Labyrinth; D:5.1180 in; manufacturer catalog number:29609-5110; pressure tolerance:Ambient; harmonization code:8487900040.US; typical application:Exceptional Bearing; |
| SMITH DYR-6 Cam Follower and Track Roller - Yoke Type | compatible bore diameter:3 in, 2-11/16 i; material:Steel; end cap type:Closed End Cap; |
| SMITH MFYR-90 Cam Follower and Track Roller - Yoke Type | d:110 mm; closure type:Open; standards met:DIN 630; internal clearance:C0; series:13; precision rating:P0, ABEC 1 (ISO; outer ring width:50 mm; static load capacity:71000 N; cage material:Brass; maximum rpm:4500 RPM; |
SMITH CR-1-1/4-XB-SS Mounted Units & Inserts Video