| No. | Brand | C | R | F | H | J | b | S | a |
| DCR-1-1/8 | SMITH | - | - | - | 72 mm | - | - | - | - |
| MCR-90 | SMITH | - | - | - | - | - | - | - | - |
| MVCR-76 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/8-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-72-BC | SMITH | 31.85 kN | - | - | 52.4 mm | - | - | - | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| HR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SC | SMITH | - | - | - | - | - | - | - | - |
| PCR-2-1/4-E | SMITH | - | - | - | 102 mm | 78 mm | - | 12.7 mm | - |
| IRR-13/16 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-BC | SMITH | - | - | - | - | - | - | - | - |
| MYR-25-SC | SMITH | 52.5 kN | - | - | - | - | - | 25.4 mm | - |
| MCR-40-S | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| CR-1-1/4-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| PCR-4-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MYR-40-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MFYR-80 | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-BC | SMITH | - | - | - | - | 184 mm | - | - | - |
| MCRV-62-SBC | SMITH | - | - | - | 55.6 mm | 164 mm | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| YAG-28 | SMITH | 14 kN | - | - | - | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-3/4-BC-SS Cam Follower and Track Roller - Stud Type | Housing Width:6.5 in; Dimension H :6-5/16 in; Series Type:Light Series; Dimension L :21-3/4 in; Seal Type:Viton Single Lip; Bearing UPC:013992028563; Bolt Size:4 x 1; Dimension K :3-3/4 in; Cor - Static Load Rating:131675 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| SMITH CR-1-5/8-XBC-SS Cam Follower and Track Roller - Stud Type | radial static load capacity:764800 lbf; misalignment angle:10 °; lubrication type:Requires Lubrication; outer ring width:3.3750 in; operating temperature range:Max 300 °F; D:7.0000 in; Weight:26.164 lbs; inner ring width:4.2250 in; manufacturer product page:Click here; series:RBC®; |
| SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
| SMITH CR-3 Cam Follower and Track Roller - Stud Type | Z:42.9 mm; G:M6x1; A:30 mm; T max.:200 °C; Designation of open end cover:SCOU203-11; L1:38 mm; s1:11 mm; Dz:46 mm; Weight:0.44 kg; B:22 mm; |
| SMITH CR-5/8-C Cam Follower and Track Roller - Stud Type | C:52.5 kN; G:M6x1; Designation of bearing:EX212G2T20; B1:77.7 mm; C0:32.8 kN; Recommended tightening torque for set screw:22 Nm; L1:70 mm; A:70 mm; d1:82 mm; B:61.8 mm; |
| SMITH MYR-30 Cam Follower and Track Roller - Yoke Type | cage material:Polyamide; radial dynamic load capacity:2300 lbf; d:15 mm; D:35 mm; series:7200; standards met:DIN 628-1; outer ring width:11 mm; radial static load capacity:1200 lbf; finish/coating:Uncoated; internal clearance:C0; |
| SMITH CR-1-5/8-X Cam Follower and Track Roller - Stud Type | Brand:SNR; E:209.5 mm; Characteristic inner ring frequency, BPFI:9.81 Hz; Characteristic outer ring frequency, BPF0:7.19 Hz; d:130 mm; D:230 mm; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:47 kN; F:153.5 mm; ra max:2.5 mm; |
| SMITH CR-1-3/8-B Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; Weight:1.076 lbs; harmonization code:3926904590.US; maximum shaft surface speed:12000 fpm; pressure tolerance:Ambient; shaft diameter:1.7500 in; width:0.6250 in; D:2.7970 in; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; |
| SMITH YAF-08 Cam Follower and Track Roller - Yoke Type | head diameter:.6250 in; housing material:52100 Bearing Steel; shank thread length:.5620 in; head width:.2500 in; ball material:Chrome Steel; thread direction:Right Hand; ball width:.4370 in; operating temperature range:Max 250°; misalignment angle:6.5 °; race material:Brass; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | Characteristic rolling element frequency, BSF:10.79 Hz; Characteristic outer ring frequency, BPF0:15.44 Hz; B:25.5 mm; D:47 mm; G:M20X1.5; R:500 mm; B3:9 mm; Minimum Buy Quantity:N/A; Product Group:B04120; Min operating temperature, Tmin:-20 °C; |
| SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type | cage material:No Cage; internal clearance:C0; standards met:SAE-AS7949, AISI 521; inner ring width:7.54 mm; outer ring width:6.86 mm; series:KSP; B:0.2970 in; d:0.1900 in; finish/coating:Cadmium Plated; bearing material:Steel; |
| SMITH HR-2-BC Cam Follower and Track Roller - Stud Type | L11:119.00 mm; Appropriate Withdrawal Nut No.:HML76; Weight:13.1 Kg; Appropriate Hydraulic Nut:HMV76; d1:340.00 mm; Taper:1:12; Thread D12:Tr380x5; b:21 mm; L:112.00 mm; |
CR-5/8-XB-SS - Detail - Manufacturer of Smith Bearing Cam ...
SMITH Bearing® Number, CR-5/8-XB-SS. HEX Size, 1/8. (P) Lube Fitting Size, N/A. (H) Oil Hole Dia. N/A. (N) Oil Hole Location, N/A. Recom. Bore .250.
Smith Bearing Cr-5/8-Xb-Ss Cam Follower,Std Stud,Sealed,Ss
Brand: SMITH BEARING. MPN: CR-5/8-XB-SS. Type: Bearings, V-belts & Power Transmission Equipment > Linear Bearing. Model: CR-5/8-XB-SS. Custom Bundle:.
SMITH CR-5/8-X-SS Cam Follower and Track Roller - Stud ...
We 78 mm l7 min. work closely with our SMITH CR-5/8-X-SS Cam Follower and Track Roller - Stud Type manufacturing partners to bring NTN BEARING CORP.
CR-5/8-X-SS, Smith Bearing Stud Mount Cam Follower Bearing
Find Stud Mounted Cam Followers CR-5/8-X-SS by Smith Bearing at Mechanidrive. Reliable bearing experts at your fingertips. Lowest prices & a huge stock of ...Filter by Type: Concentric StudFilter by Material: Stainless SteelFilter by Brand: Smith BearingWeight: 0.05 LBS
Smith Bearing CR-5/8-XB-SS | 11Y241 Cam Follower ...
SMITH BEARING. SMITH BEARING CR-5/8-XB-SS Cam Follower Standard Stud Sealed Stainless Steel. In Stock ... Enter your Email Address and click Submit.Bearing Type: Needle Roller,SealedRoller Type: Hex Socket HeadStud Material: Stainless SteelStud Length: 0.75"
smith bearing cr-5/8-xb-ss - Stud Type - BDI Express
CR-5/8-XB-SS NEEDLE BRG CAM FOLLOWER ; STUD TYPE SS HEX HEAD SLOT SEALED. 5/8" Roller Diameter; 7/16" Roller Width; Flat Roller Surface Profile; ...
Cam Follower, Std Stud, Sealed, SS - Zoro Tools
Smith Bearing #CR-5/8-XB-SS Specifications ; Roller Style: Stud ; Roller Shape: Flat ; Face Design: Hex Socket ; Roller Dia.: 0.625 in ; Roller Width: 0.4375 in ...Bearing Type: Needle Roller,SealedStud Material: Stainless SteelRoller Type: Hex Socket HeadStud Length: 0.75 in
SMITH CR-5/8-X-SS Cam Follower and Track Roller - Stud Type Video