| No. | Brand | C | R | F | H | J | b | S | a |
| CR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| HR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| VYR-8-1/2 | SMITH | - | - | 0.115 in | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| MCR-90-C | SMITH | 122.85 kN | - | - | - | - | - | 40.5 mm | - |
| YR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-3-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
| MYR-25-SC | SMITH | 52.5 kN | - | - | - | - | - | 25.4 mm | - |
| DCR-1-1/8 | SMITH | - | - | - | 72 mm | - | - | - | - |
| CR-4-XC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-25-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-72 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-X-SS Cam Follower and Track Roller - Stud Type | construction description:Guardian® Flange; maximum shaft surface speed:12000 fpm; continuous temperature range:-22 to 400°F; misalignment tolerance:0.010 in; lip material:Labyrinth; D:5.1180 in; manufacturer catalog number:29609-5110; pressure tolerance:Ambient; harmonization code:8487900040.US; typical application:Exceptional Bearing; |
| SMITH PCR-2-1/4-E Cam Follower and Track Roller - Stud Type | J:78 mm; L:60 mm; S:12.7 mm; G:M6x1; Dz:54 mm; s1:15.5 mm; C0:6.65 kN; Z:37 mm; A:25.5 mm; H:102 mm; |
| SMITH YAF-08 Cam Follower and Track Roller - Yoke Type | head diameter:.6250 in; housing material:52100 Bearing Steel; shank thread length:.5620 in; head width:.2500 in; ball material:Chrome Steel; thread direction:Right Hand; ball width:.4370 in; operating temperature range:Max 250°; misalignment angle:6.5 °; race material:Brass; |
| SMITH YAF-20 Cam Follower and Track Roller - Yoke Type | d:65 mm; T min.:-40 °C; s1:57.6 mm; Weight:6.9 kg; N1:28 mm; A:65 mm; Designation of housing:PE213N-; C0:40 kN; Designation of open end cover:SCOE213-65; C:57.2 kN; |
| SMITH MCRV-52-S Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:7540 lb; radial static load capacity:6570 lb; series:200; mounting:Two-Bolt Base; seal type:Contact/Lip; bore type:Round; housing material:Cast Iron; overall height:5.0000 in; expansion type:Non-Expansion Bearin; maximum rpm:3200 RPM; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH MCR-26-SB Cam Follower and Track Roller - Stud Type | Designation of housing:FA207N-; N:15mm; Z:30 mm; B:42.9 mm; A2:44.4 mm; C0:15.2 kN; C:25.7 kN; J:130 mm; Weight:1.28 kg; Recommended tightening torque for set screw:8 Nm; |
| SMITH CR-5/8-C Cam Follower and Track Roller - Stud Type | C:52.5 kN; G:M6x1; Designation of bearing:EX212G2T20; B1:77.7 mm; C0:32.8 kN; Recommended tightening torque for set screw:22 Nm; L1:70 mm; A:70 mm; d1:82 mm; B:61.8 mm; |
| SMITH MCR-90-C Cam Follower and Track Roller - Stud Type | C:122.85 kN; S:40.5 mm; A5:40.5 mm; Designation of bearing:EX316G2L3; Recommended tightening torque for set screw:64 Nm; C0:86.5 kN; G:M10x1; s1:72.3 mm; SW:8 mm; T max.:100 °C; |
| SMITH MUTD-25 Cam Follower and Track Roller - Yoke Type | lip material:Labyrinth; shaft diameter:1.8750 in; Weight:0.204 lb; typical application:Exceptional Bearing; harmonization code:3926904590.US; width:0.6250 in; construction description:ISO-GARD® Flange; continuous temperature range:-22 to 400°F; manufacturer catalog number:29519-0989; maximum shaft surface speed:4500 fpm; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH MYRV-25-C Cam Follower and Track Roller - Yoke Type | B:0.3125 in; standards met:AISI 52100; axial dynamic load capacity:2560 lb; radial static load capacity:3170 lb; bearing material:Steel; precision rating:ABEC 1 (ISO Cla; internal clearance:C0; axial static load capacity:7920 lb; finish/coating:Uncoated; inside diameter:7.5000 in; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | Characteristic rolling element frequency, BSF:10.79 Hz; Characteristic outer ring frequency, BPF0:15.44 Hz; B:25.5 mm; D:47 mm; G:M20X1.5; R:500 mm; B3:9 mm; Minimum Buy Quantity:N/A; Product Group:B04120; Min operating temperature, Tmin:-20 °C; |
| SMITH DYR-6 Cam Follower and Track Roller - Yoke Type | compatible bore diameter:3 in, 2-11/16 i; material:Steel; end cap type:Closed End Cap; |
SMITH CR-2-1/4-XBE Cam Follower and Track Roller - Stud Type Video