| SMITH MYR-50-C Cam Follower and Track Roller - Yoke Type | Series:15000; C - Cup Width:15.875 mm; B - Cone Width:20.638 mm; a - Effective Center Location3:-5.8 mm; Da - Cup Frontface Backing Diameter:59.44 mm; G1 - Heat Generation Factor (Roller-Raceway):14.6; e - ISO Factor8:0.35; Y - ISO Factor9:1.71; D:63.500 mm; da - Cone Frontface Backing Diameter:31.5 mm; |
| SMITH CR-2-1/2-XC Cam Follower and Track Roller - Stud Type | C1:5 mm; B1:48.3 mm; B2:15.9 mm; T max.:100 °C; C0:11.2 kN; m:6 mm; S:18.2 mm; Weight:0.41 kg; G:M8x1; C:19 mm; |
| SMITH PYR-6 Cam Follower and Track Roller - Yoke Type | Radial clearance class:CN; Characteristic cage frequency, FTF:0.41 Hz; Brand:SNR; Static load, C0:5.9 kN; Nref:15,000 rpm; rs min:0.6 mm; D:47 mm; Dynamic load, C:9.9 kN; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:4.12 Hz; |
| SMITH BCR-7/8-C Cam Follower and Track Roller - Stud Type | material specification:SAE 841 Bronze; sleeve bearing type:Plain Sleeve; operating temperature range:10 to 220 ºF; bearing material:Powdered Metal SAE 8; groove/plug type:Oil-Filled Grooves; maximum p value:2000; manufacturer catalog:Click here; D:11/16 in; d:1/2 in; standards met:ASTM B438 Grade 1 Ty; |
| SMITH MCR-80-B Cam Follower and Track Roller - Stud Type | L2:13 mm; C:25.7 kN; d1:51.1 mm; L:129 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; H1:89 mm; L3:64 mm; Dz:80 mm; |
| SMITH MCR-72 Cam Follower and Track Roller - Stud Type | Fatigue limit load, Cu:0.34 kN; Dynamic load, C:12.5 kN; da min:32 mm; Radial clearance class:C3; Min operating temperature, Tmin:-25 °C; ra max:0.6 mm; Da max:48 mm; Mass:0.1 kg; Characteristic cage frequency, FTF:0.41 Hz; Static load, C0:7.4 kN; |
| SMITH HR-1/2-X Cam Follower and Track Roller - Stud Type | manufacturer upc number:793699130386; seal type:Contact Seal; d:2.9375 in; housing material:Cast Iron; series:200; mounting type:Four-Bolt Flange; duty type:Standard Duty; locking device:Set Screw; |
| SMITH MPYR-62 Cam Follower and Track Roller - Yoke Type | radial static load capacity:16100 lbf; radial dynamic load capacity:21500 lbf; D:6.7500 in; bore type:Round; locking device:Set Screw; housing material:Cast Iron; expansion type:Non-Expansion Bearin; length through bore:3.780 in; lubrication type:Lubrication Fitting; seal type:Contact with Flinger; |
| SMITH MCRV-47-BC Cam Follower and Track Roller - Stud Type | Dz:110 mm; G:M6x1; Designation of closed end cover:SCCE211; Weight:3.36 kg; B:55.4 mm; J:184 mm; N:19mm; L:130 mm; Designation of housing:FL211N-; A1:18 mm; |
| SMITH BCR-5/8 Cam Follower and Track Roller - Stud Type | Dynamic load, C:2,200 kN; D1:312.9 mm; Nref:1,200 rpm; Nlim:1,800 rpm; Radial clearance class:C4; da min:187 mm; Fatigue limit load, Cu:175 kN; b:20.3 mm; ra max:3 mm; d2:236 mm; |
| SMITH YAG-12 Cam Follower and Track Roller - Yoke Type | A:18 mm; J:78 mm; d1:32.4 mm; L:100 mm; B:34 mm; C:12.8 kN; e:2 mm; d:12 mm; A2:28.5 mm; T max.:100 °C; |
| SMITH IRR-1/2 Needle Non Thrust Roller Bearings | cup width:1.1250 in; finish/coating:Uncoated; compatible cone:HM807047; series:HM; flange type:Flanged Cup; abma precision rating:Class 2; manufacturer upc number:053893693408; lubrication hole type:No Hole; single or double cup:Single Cup; D:4.5450 in; |
| SMITH CR-3/4-BC-SS Cam Follower and Track Roller - Stud Type | Housing Width:6.5 in; Dimension H :6-5/16 in; Series Type:Light Series; Dimension L :21-3/4 in; Seal Type:Viton Single Lip; Bearing UPC:013992028563; Bolt Size:4 x 1; Dimension K :3-3/4 in; Cor - Static Load Rating:131675 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| SMITH MVCR-76 Cam Follower and Track Roller - Stud Type | Y2 - Geometry Factor:4.31; Dimension A:4.00 in; Dimension R:0.32 in; Shaft Size Type:Metric; Shaft Tolerance:0.0030 in; UPC Code:0883450093620; Housing Style:Four-Bolt Pillow Blo; Eng Internal Radial Clearance - Max:0.0039; Dimension H:1.50 in; Grease Lubrication - M/N Seal:1400 rpm; |