| No. | Brand | C | R | F | H | J | b | S | a |
| PCR-2-1/4-E | SMITH | - | - | - | 102 mm | 78 mm | - | 12.7 mm | - |
| DYR-6 | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-B | SMITH | - | - | - | - | - | - | - | - |
| YR-3/4-X-SS | SMITH | - | - | - | - | - | - | - | - |
| MPCR-40 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| MPYR-62 | SMITH | - | - | - | - | - | - | - | - |
| MYR-30 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBE | SMITH | 43.55 kN | - | - | - | - | - | - | - |
| MYR-20-C | SMITH | 25.7 kN | - | - | - | 82.6 mm | - | 8.5 mm | - |
| CR-1-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MYR-50-SC | SMITH | - | - | - | - | - | - | - | - |
| YR-3-1/4-C | SMITH | 113.36 kN | - | - | 190 mm | - | - | - | - |
| MYR-40-SC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-B | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-B | SMITH | - | - | - | - | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| MCRV-85-C | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| SMITH MYRV-15-C Cam Follower and Track Roller - Yoke Type | bore type:Straight; d:200 mm; lubrication hole type:No Holes; fillet radius:4 mm; outer ring width:165 mm; cage material:Brass; internal clearance:C0; outer ring type:Not Split; series:233; static load capacity:3600000 N; |
| SMITH PCR-2-1/4-E Cam Follower and Track Roller - Stud Type | J:78 mm; L:60 mm; S:12.7 mm; G:M6x1; Dz:54 mm; s1:15.5 mm; C0:6.65 kN; Z:37 mm; A:25.5 mm; H:102 mm; |
| SMITH MYRV-5 Cam Follower and Track Roller - Yoke Type | e - Geometry Factor:0.25; Pre Install Clearance Max:0.0067 in; Shaft Tolerance:0.0030 in; Dimension B:8.780 in; C - Dynamic Load (Basic):125000 lb; Dimension H:2.12 in; Bearing Number:22222; Y1 - Geometry Factor:2.73; Pre Install Clearance Min:0.0053 in; Dimension C:5.5 in; |
| SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type | maximum rpm:5000 rpm; B:0.8750 in; cage material:Steel; series:RS - Multi-Rol; static load capacity:11500 lbs; operating temperature range:-20F to 250 °F; bearing material:Chrome Steel; flanges:No Flange; standards met:ABMA, ISO; precision rating:Not Rated; |
| SMITH NUKR-30 Cam Follower and Track Roller - Stud Type | C:43.55 kN; A:60 mm; J:176 mm; B:55.6 mm; L1:68 mm; N1:30 mm; T max.:200 °C; d:55.56 mm; Z:77.7 mm; H:63.5 mm; |
| SMITH MCR-80-B Cam Follower and Track Roller - Stud Type | L2:13 mm; C:25.7 kN; d1:51.1 mm; L:129 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.66 kg; Designation of open end cover:SCOE207-35; H1:89 mm; L3:64 mm; Dz:80 mm; |
| SMITH HR-7/8-X Cam Follower and Track Roller - Stud Type | B:2.7969 in; flange mounting type:Three-Bolt Triangle; housing construction:Solid Housing; housing material:Aluminum; compatible bore diameter:1.0000 in, 0.8750 in; D:3.0000 in; series:LF; |
| SMITH DCR-1-1/4 Cam Follower and Track Roller - Stud Type | d1:146 mm; A3:4 mm; C0:140 kN; SW:9.52 mm; H:260 mm; G:M10x1; Recommended tightening torque for set screw:65.2 Nm; T max.:200 °C; Designation of bearing:EX320-64G2T20; A5:50 mm; |
| SMITH CR-2-1/2-XC Cam Follower and Track Roller - Stud Type | C1:5 mm; B1:48.3 mm; B2:15.9 mm; T max.:100 °C; C0:11.2 kN; m:6 mm; S:18.2 mm; Weight:0.41 kg; G:M8x1; C:19 mm; |
| SMITH HR-1-1/2-C Cam Follower and Track Roller - Stud Type | Dimension G:3.410 in; Dimension RV:0.23 in; Eng Internal Radial Clearance - Min:0.0043; Dimension B:7.69 in; Y2 - Geometry Factor:4.29; Dimension C:4.9 in; Shaft Tolerance:0.0030 in; Dimension D Min:9.38 in; Grease Lubrication - B/C/O Seal:950 rpm; Float:0.083 in; |
| SMITH CR-2-1/2-B Cam Follower and Track Roller - Stud Type | T max.:100 °C; H3:90; C0:15.2 kN; Weight:1.37 kg; T min.:-20 °C; C:25.7 kN; L:135 mm; d:36.51 mm; A1:10 mm; A2:32.5 mm; |
| SMITH YR-3/4-X-SS Cam Follower and Track Roller - Yoke Type | seal type:Felt Seal; D:4.8750 to 5.8750 in; duty type:Normal Duty; bolt size:14 mm; lubrication type:Lubrication Fitting; locking device:Skwezloc; bore type:Round; B:2.0000 in; expansion type:Non-Expansion Bearin; housing material:Cast Iron; |
| SMITH MYR-40-SC Cam Follower and Track Roller - Yoke Type | Characteristic outer ring frequency, BPF0:7.68 Hz; e:0.32; Product Group:B04334; Inventory:0.0; Manufacturer Name:NTN; Dynamic load, C:76.5 kN; B:22.22 mm; Nlim (oil):5,500 rpm; Nlim (grease):4,100 rpm; Rating life coefficient, A2:1.4; |
| SMITH CR-2-1/4-XBEC Cam Follower and Track Roller - Stud Type | overall length:13.0000 in; expansion type:Non-Expansion Bearin; duty type:Heavy Duty; finish/coating:Powder Coat; radial static load capacity:87200 lbs; bearing type:Spherical Roller; bolt size:0.8750 in; base height:1.8800 in; base width:3.4100 in; series:QMPL; |
SMITH YR-3-1/4-C Cam Follower and Track Roller - Yoke Type Video