| No. | Brand | C | R | F | H | J | b | S | a |
| BCR-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-80-SBC | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| MCRV-62-SBC | SMITH | - | - | - | 55.6 mm | 164 mm | - | - | - |
| MCR-26-SB | SMITH | 25.7 kN | - | - | - | 130 mm | - | - | - |
| VCR-5-1/2 | SMITH | - | - | - | - | - | - | - | - |
| IRR-1/2 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBE | SMITH | 43.55 kN | - | - | - | - | - | - | - |
| CR-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-C | SMITH | 52.5 kN | - | - | - | - | - | - | - |
| IRR-13/16 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8 | SMITH | - | - | - | - | - | 20.3 mm | - | - |
| PYR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-BC | SMITH | - | - | - | 90 mm | - | - | - | - |
| SMITH CR-3/4-C Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:10; finish/coating:Uncoated; travel:12 in; series:TP; |
| SMITH MYR-30 Cam Follower and Track Roller - Yoke Type | cage material:Polyamide; radial dynamic load capacity:2300 lbf; d:15 mm; D:35 mm; series:7200; standards met:DIN 628-1; outer ring width:11 mm; radial static load capacity:1200 lbf; finish/coating:Uncoated; internal clearance:C0; |
| SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
| SMITH BCR-1/2-C Cam Follower and Track Roller - Stud Type | Category:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:M06288; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH MCR-19-SBC Cam Follower and Track Roller - Stud Type | D:35 mm; compatible bearing part number:AXK, K811; compatible bearing type:Needle Roller Thrust; inside diameter:20 mm; washer type:Thrust Washer; width:2.75 mm; |
| SMITH YAG-12 Cam Follower and Track Roller - Yoke Type | A:18 mm; J:78 mm; d1:32.4 mm; L:100 mm; B:34 mm; C:12.8 kN; e:2 mm; d:12 mm; A2:28.5 mm; T max.:100 °C; |
| SMITH MCRV-72-BC Cam Follower and Track Roller - Stud Type | L:197.5 mm; C:31.85 kN; H2:106.4 mm; B:42.8 mm; d:44.45 mm; C0:20.8 kN; B1:56.3 mm; Weight:2.57 kg; Designation of bearing:EX209-28G2L4; H:52.4 mm; |
| SMITH MUTD-45100 Cam Follower and Track Roller - Yoke Type | Characteristic rolling element frequency, BSF:10.79 Hz; Characteristic outer ring frequency, BPF0:15.44 Hz; B:25.5 mm; D:47 mm; G:M20X1.5; R:500 mm; B3:9 mm; Minimum Buy Quantity:N/A; Product Group:B04120; Min operating temperature, Tmin:-20 °C; |
| SMITH YR-7/8-SS Cam Follower and Track Roller - Yoke Type | cage material:No Cage; internal clearance:C0; standards met:SAE-AS7949, AISI 521; inner ring width:7.54 mm; outer ring width:6.86 mm; series:KSP; B:0.2970 in; d:0.1900 in; finish/coating:Cadmium Plated; bearing material:Steel; |
| SMITH CR-1-3/4-XB Cam Follower and Track Roller - Stud Type | Z:64 mm; s1:30.5 mm; Dz:54 mm; d1:32.4 mm; A5:17 mm; L1:225 mm; Weight:1.69 kg; Designation of open end cover:SCOE204-20; B:34 mm; L:264 mm; |
| SMITH MFYR-80 Cam Follower and Track Roller - Yoke Type | Support Type:Four-Bolt Plummer Bl; Bearing Type:Split Cylindrical Re; Series Type:Light Series; Bearing - Housing - Seal:LSE1200BRHKPS; Dimension H2:27.0 in; Bearing - Housing - Seal UPC:013992095428; Ca - Axial Load Rating:17580 lbf; Dimension L:32.0 in; Dimension H:13.504 in; Dimension H1:2.0 in; |
| SMITH CR-3/4-X Cam Follower and Track Roller - Stud Type | Weight:176.2 lb; D - Bearing O.D.:50.5000 in; Bearing Type:Thrust Tapered Rolle; d - Bore Diameter:45.7500 in; B:2.0625 in; Bearing Configuration:Thrust TTHD - with c; Static Load Rating:4280000 lbf; R - Fillet Radius Shaft (Max):0.13 in; Dynamic Load Rating:139000 lbf; r - Fillet Radius Housing (Max):0.13 in; |
| SMITH BCR-1-5/8-C Cam Follower and Track Roller - Stud Type | N:12mm; T min.:-20 °C; G:M6x1; e:10 mm; L:125 mm; T max.:100 °C; C0:11.2 kN; d1:44.1 mm; A:31 mm; d:31.75 mm; |
SMITH MYRV-15-S Cam Follower and Track Roller - Yoke Type Video