| No. | Brand | C | R | F | H | J | b | S | a |
| HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
| MYRV-25-C | SMITH | - | - | - | - | - | - | - | - |
| HR-4-B | SMITH | - | - | - | - | - | - | - | - |
| YR-7/8-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-35-C | SMITH | - | - | - | - | - | - | - | - |
| HR-3-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-A-XBC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MYRV-50-C | SMITH | - | - | - | - | - | - | - | - |
| VCR-5-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-XB | SMITH | - | - | - | - | - | - | - | - |
| PYR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MYR-30 | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-7/16 | SMITH | 12 mm | - | - | - | - | - | - | 10.4 mm |
| MPCR-35 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-X-SS | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-E | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8 | SMITH | - | - | - | - | - | 20.3 mm | - | - |
| CR-1-3/8-B | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1/2-C-SS Cam Follower and Track Roller - Stud Type | maximum rpm:2440 RPM; finish/coating:Uncoated; fillet radius:3 mm; cage material:Brass; precision rating:Not Rated; static load capacity:2370000 N; closure type:Open; internal clearance:C3; number of rows:1; B:108 mm; |
| SMITH HR-7/8-X Cam Follower and Track Roller - Stud Type | B:2.7969 in; flange mounting type:Three-Bolt Triangle; housing construction:Solid Housing; housing material:Aluminum; compatible bore diameter:1.0000 in, 0.8750 in; D:3.0000 in; series:LF; |
| SMITH CR-1-1/8-C Cam Follower and Track Roller - Stud Type | locking device:Concentric Collar; radial dynamic load capacity:41800 lb; finish/coating:Powder Coated; base width:3-3/16 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; D:7-13/16 to 9-3&; housing material:Cast Iron; bore type:Round; B:4 in; |
| SMITH MPCR-35 Cam Follower and Track Roller - Stud Type | radial static load capacity:71900 lbs; overall length:12.6300 in; bolt size:0.7500 in; bearing type:Spherical Roller; expansion type:Expansion Bearing &#; locking device:Adapter Mount; housing construction:Solid Pillow Block; B:3.4700 in; bore type:Round; radial dynamic load capacity:66900 lbs; |
| SMITH HR-4-B Cam Follower and Track Roller - Stud Type | d:1-3/4 in; maximum pv value:50000; D:2 in; maximum p value:Static 8000 / Dynamic 2000 (psi); overall length:1 in; maximum v value:1200 (sfm); sleeve bearing type:Plain Sleeve; material specification:Oilite®, Synthetic Performance Difference®; bearing material:Oil-Impregnated Bronze; standards met:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; groove/plug type:None; |
| SMITH MCR-90-C Cam Follower and Track Roller - Stud Type | C:122.85 kN; S:40.5 mm; A5:40.5 mm; Designation of bearing:EX316G2L3; Recommended tightening torque for set screw:64 Nm; C0:86.5 kN; G:M10x1; s1:72.3 mm; SW:8 mm; T max.:100 °C; |
| SMITH YR-3-1/4-C Cam Follower and Track Roller - Yoke Type | T max.:100 °C; C:113.36 kN; SW:6.35 mm; s1:41 mm; H:190 mm; A5:50 mm; d:76.2 mm; A3:4 mm; T min.:-20 °C; B:82 mm; |
| SMITH MCRV-80-SBC Cam Follower and Track Roller - Stud Type | compatible bearing series/part number:22200; overall height:5-1/4 in; D:35 in; series:22200; compatible bore diameter:1-15/16 in; base width:4-1/2 in; travel:18 in; frame type:One-Piece Saddle Mou; bolt center-to-center width:2-1/2 in; overall length:37 in; |
| SMITH MYRV-15-C Cam Follower and Track Roller - Yoke Type | bore type:Straight; d:200 mm; lubrication hole type:No Holes; fillet radius:4 mm; outer ring width:165 mm; cage material:Brass; internal clearance:C0; outer ring type:Not Split; series:233; static load capacity:3600000 N; |
| SMITH CR-1-3/4-XB Cam Follower and Track Roller - Stud Type | Z:64 mm; s1:30.5 mm; Dz:54 mm; d1:32.4 mm; A5:17 mm; L1:225 mm; Weight:1.69 kg; Designation of open end cover:SCOE204-20; B:34 mm; L:264 mm; |
| SMITH BCR-1-1/8-BC Cam Follower and Track Roller - Stud Type | series:AZ52; |
| SMITH MFCR-72 Cam Follower and Track Roller - Stud Type | Grease Reference Speed:9300 rpm; Bore Size d:35 mm; Features:Open; C0r - Static Load Rating:19.2 kN; Oil Reference Speed:13000 rpm; Clearance:C3; Weight:0.45 Kg; Outside Diameter D:80.000 mm; Outside Ring Width B:21.000 mm; Cr - Dynamic Load Rating:33.4 kN; |
| SMITH BCR-1-3/4-BC Cam Follower and Track Roller - Stud Type | B:31 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; Dz:54 mm; s1:15.5 mm; N:11,5mm; A:30.3 mm; J:90 mm; Weight:0.5 kg; d:19.05 mm; |
| SMITH YAG-32 Cam Follower and Track Roller - Yoke Type | bolt size:0.6250 in; bearing type:Spherical Roller; finish / coating:Powder coat; Weight:17 lbs; bore type:Round; seal type:Triple-lip contactin; housing material:Cast Steel; manufacturer product page:Click here; lubrication type:Lubrication Fitting; locking device:Single V-Lock; |
SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type Video