| No. | Brand | C | R | F | H | J | b | S | a |
| YR-1-3/8-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-XBE | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1-5/8-SS | SMITH | - | - | - | - | - | - | - | - |
| MPCR-35 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-BC | SMITH | - | - | - | - | - | 21 mm | - | - |
| MYRV-15-S | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-B | SMITH | - | - | - | - | - | - | - | - |
| IRR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-72-BC | SMITH | 31.85 kN | - | - | 52.4 mm | - | - | - | - |
| MPYR-62 | SMITH | - | - | - | - | - | - | - | - |
| YAF-20 | SMITH | 57.2 kN | - | - | - | - | - | - | - |
| HR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| IRR-13/16 | SMITH | - | - | - | - | - | - | - | - |
| MPCR-40 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C-SS | SMITH | - | - | - | - | - | - | - | - |
| MFYR-90 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| IRR-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-2-1/4-XBEC Cam Follower and Track Roller - Stud Type | overall length:13.0000 in; expansion type:Non-Expansion Bearin; duty type:Heavy Duty; finish/coating:Powder Coat; radial static load capacity:87200 lbs; bearing type:Spherical Roller; bolt size:0.8750 in; base height:1.8800 in; base width:3.4100 in; series:QMPL; |
| SMITH CR-1-3/4-BC-SS Cam Follower and Track Roller - Stud Type | manufacturer upc number:717905058950; sleeve bearing type:Plain Sleeve; maximum pv value:75000; material specification:SAE 660 (C932&#; groove/plug type:None; standards met:83-7-7-3, ASTM B505,; d:1/4 in; maximum v value:750 fp/min; Weight:0.01 lb; bearing material:Cast Bronze C93200 &; |
| SMITH MCR-30-C Cam Follower and Track Roller - Stud Type | d:25 mm; series:UCNTPL200MZ2W; overall length:99 mm; overall height:88.5 mm; manufacturer product page:Click here; lubrication type:Lubrication Fitting; seal type:Contact with Slinger; slot spacing:45 mm; slot width:6.4 mm; unit type:Side Mount; |
| SMITH CR-1-5/8-X Cam Follower and Track Roller - Stud Type | Brand:SNR; E:209.5 mm; Characteristic inner ring frequency, BPFI:9.81 Hz; Characteristic outer ring frequency, BPF0:7.19 Hz; d:130 mm; D:230 mm; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:47 kN; F:153.5 mm; ra max:2.5 mm; |
| SMITH MCRV-72-BC Cam Follower and Track Roller - Stud Type | L:197.5 mm; C:31.85 kN; H2:106.4 mm; B:42.8 mm; d:44.45 mm; C0:20.8 kN; B1:56.3 mm; Weight:2.57 kg; Designation of bearing:EX209-28G2L4; H:52.4 mm; |
| SMITH HR-1/2-X Cam Follower and Track Roller - Stud Type | manufacturer upc number:793699130386; seal type:Contact Seal; d:2.9375 in; housing material:Cast Iron; series:200; mounting type:Four-Bolt Flange; duty type:Standard Duty; locking device:Set Screw; |
| SMITH CR-2-1/2-XC Cam Follower and Track Roller - Stud Type | C1:5 mm; B1:48.3 mm; B2:15.9 mm; T max.:100 °C; C0:11.2 kN; m:6 mm; S:18.2 mm; Weight:0.41 kg; G:M8x1; C:19 mm; |
| SMITH HR-1-1/2-C Cam Follower and Track Roller - Stud Type | Dimension G:3.410 in; Dimension RV:0.23 in; Eng Internal Radial Clearance - Min:0.0043; Dimension B:7.69 in; Y2 - Geometry Factor:4.29; Dimension C:4.9 in; Shaft Tolerance:0.0030 in; Dimension D Min:9.38 in; Grease Lubrication - B/C/O Seal:950 rpm; Float:0.083 in; |
| SMITH HR-7/8-X Cam Follower and Track Roller - Stud Type | B:2.7969 in; flange mounting type:Three-Bolt Triangle; housing construction:Solid Housing; housing material:Aluminum; compatible bore diameter:1.0000 in, 0.8750 in; D:3.0000 in; series:LF; |
| SMITH BCR-3/4-B Cam Follower and Track Roller - Stud Type | overall length:1.0000 in; bushing material:PTFE; bushing type:Plain; bushing outside diameter:1.6563 in; groove type:Graphite-Filled Groo; inside diameter:1.5000 in; |
| SMITH PCR-2-1/4-E Cam Follower and Track Roller - Stud Type | J:78 mm; L:60 mm; S:12.7 mm; G:M6x1; Dz:54 mm; s1:15.5 mm; C0:6.65 kN; Z:37 mm; A:25.5 mm; H:102 mm; |
| SMITH MCRV-62-SBC Cam Follower and Track Roller - Stud Type | d:47.62 mm; Designation of open end cover:SCOU210-30; N:14mm; Z:77.1 mm; Designation of bearing:UC210-30G2T20; J:164 mm; H:55.6 mm; A:55 mm; Recommended tightening torque for set screw:16.8 Nm; H1:19.3 mm; |
| SMITH CR-2-1/4-B Cam Follower and Track Roller - Stud Type | manufacturer catalog number:701903; bore type:Round; replacement bearing:AR-2-23; locking device:Set Screw; base width:3.1250 in; bolt size:.7500 in; operating temperature range:Max 250°; base to bore centerline:2.7500 in; finish/coating:Uncoated; mounting:Two-Bolt Base; |
| SMITH CR-1-1/4-XB-SS Mounted Units & Inserts | L:57 mm; Weight:0.43 kg; d:17 mm; d1:27.2 mm; G:M6x1; A:25.5 mm; Designation of bearing:ES203G2; A2:37.1 mm; B1:28.6 mm; T max.:100 °C; |
SMITH CR-1-3/4-BC Cam Follower and Track Roller - Stud Type Video