| No. | Brand | C | R | F | H | J | b | S | a |
| CR-2-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/4-XBEC | SMITH | - | - | - | - | - | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-B | SMITH | 25.7 kN | - | - | - | - | - | - | - |
| CR-1-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| MUTD-45100 | SMITH | - | 500 mm | - | - | - | - | - | - |
| MCR-85-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8-XC | SMITH | - | - | - | - | 170 mm | - | - | - |
| MVCR-76 | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-B | SMITH | - | - | - | - | - | - | - | - |
| MYRV-12-C | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | 260 mm | - | - | - | - |
| MYRV-15-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-C | SMITH | 52.5 kN | - | - | - | - | - | - | - |
| CR-1-7/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-B | SMITH | 31.85 kN | - | - | - | - | - | - | - |
| BCR-1-5/8-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | d:75 mm; bearing material:Steel; manufacturer upc number:029176402531; cage material:Polyamide 66 Resin; closure type:Open; B:25 mm; series:NU200; static load capacity:156000 N; internal clearance:C0; fillet radius:1.5 mm; |
| SMITH YAF-08 Cam Follower and Track Roller - Yoke Type | head diameter:.6250 in; housing material:52100 Bearing Steel; shank thread length:.5620 in; head width:.2500 in; ball material:Chrome Steel; thread direction:Right Hand; ball width:.4370 in; operating temperature range:Max 250°; misalignment angle:6.5 °; race material:Brass; |
| SMITH HR-4-B Cam Follower and Track Roller - Stud Type | d:1-3/4 in; maximum pv value:50000; D:2 in; maximum p value:Static 8000 / Dynamic 2000 (psi); overall length:1 in; maximum v value:1200 (sfm); sleeve bearing type:Plain Sleeve; material specification:Oilite®, Synthetic Performance Difference®; bearing material:Oil-Impregnated Bronze; standards met:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; groove/plug type:None; |
| SMITH CR-1-3/4-C-SS Cam Follower and Track Roller - Stud Type | T - Bearing Width to Flange:0.4688 in; D1 - Flange Outer Diameter:4.6523 in; K - Factor7:1.72; G2 - Heat Generation Factor (Rib-Roller End):23.7; T1 - Bearing Width:1.1876 in; R - Cone Backface To Clear Radius1:0.14 in; Series:39500; Da - Cup Frontface Backing Diameter:4.35 in; d:2.6250 in; Cone Part Number:39590; |
| SMITH CR-1/2-C-SS Cam Follower and Track Roller - Stud Type | maximum rpm:2440 RPM; finish/coating:Uncoated; fillet radius:3 mm; cage material:Brass; precision rating:Not Rated; static load capacity:2370000 N; closure type:Open; internal clearance:C3; number of rows:1; B:108 mm; |
| SMITH HR-1-1/2-C Cam Follower and Track Roller - Stud Type | Dimension G:3.410 in; Dimension RV:0.23 in; Eng Internal Radial Clearance - Min:0.0043; Dimension B:7.69 in; Y2 - Geometry Factor:4.29; Dimension C:4.9 in; Shaft Tolerance:0.0030 in; Dimension D Min:9.38 in; Grease Lubrication - B/C/O Seal:950 rpm; Float:0.083 in; |
| SMITH BCR-1/2-B Cam Follower and Track Roller - Stud Type | Designation of bearing:US209G2; Weight:1.75 kg; L1:29 mm; Recommended tightening torque for set screw:11.5 Nm; B:41.2 mm; A1:32 mm; C:31.85 kN; T min.:-20 °C; s1:20.6 mm; T max.:100 °C; |
| SMITH MCRV-47-BC Cam Follower and Track Roller - Stud Type | Dz:110 mm; G:M6x1; Designation of closed end cover:SCCE211; Weight:3.36 kg; B:55.4 mm; J:184 mm; N:19mm; L:130 mm; Designation of housing:FL211N-; A1:18 mm; |
| SMITH BYR-1-7/8-XC Cam Follower and Track Roller - Yoke Type | maximum rpm:2900 RPM; D:8.8750 in; bolt size:0.8750 in; series:200; bore type:Round; housing material:Cast Iron; length through bore:2.2656 in; seal type:Contact/Lip; manufacturer upc number:662864715546; mounting:Two-Bolt Base; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | A3:1.5 mm; T max.:100 °C; SW:3 mm; s1:15.5 mm; Weight:0.48 kg; A:20 mm; H:72 mm; B:31 mm; C0:6.65 kN; G:M6x1; |
| SMITH CR-1/2-C Cam Follower and Track Roller - Stud Type | manufacturer upc number:087796026346; lubrication hole type:Lubrication Groove &; bearing material:Chrome Steel; D:150 mm; bore type:Straight; d:70 mm; outer ring type:Not Split; finish/coating:Uncoated; cage material:Steel Cage; B:51 mm; |
| SMITH CR-1-5/8-B Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.41 Hz; Keyword String:Ball; rs min:1.5 mm; Internal Clearance:C0-Medium; UNSPSC:31171504; Dynamic load, C:52.5 kN; Static load, C0:36 kN; Inner Race Width:0 Inch | 0 Millimete; Enclosure:Open; |
| SMITH YR-3-1/4-C Cam Follower and Track Roller - Yoke Type | T max.:100 °C; C:113.36 kN; SW:6.35 mm; s1:41 mm; H:190 mm; A5:50 mm; d:76.2 mm; A3:4 mm; T min.:-20 °C; B:82 mm; |
| SMITH MCRV-26-B Cam Follower and Track Roller - Stud Type | series:9000; inner ring width:4-1/4 in; expansion type:Non-Expansion Bearin; bearing type:Spherical Roller; maximum rpm:1400 RPM; housing width:3-7/16 in; lubrication type:Lubrication Fitting; D:6-3/4 in; radial dynamic load capacity:82000 lb; finish/coating:Powder Coated; |
Smith Bearing PCR-4 1/2 Smith-Trax Bearings, Plain Stud ...
The SMITH-TRAX special duty track roller bearings are machined from high-alloy steel and are case-hardened for maximum longevity. These bearings are fitted ...Item Diameter: 4.5 inchesBrand Name: Smith Bearing$162.67 · Out of stock
Smith Bearing Pcr-4-1/2 Track Roller,Stud,Roller Dia. 4-1/2 In.
4.5 in, Roller Width 2.0 in, Stud Type Concentric, Stud Dia. 1.25 in, Stud Length 2.75 in, Thread Size 1-1/4-12, Thread Length (In.).
smith bearing pcr-4-1/2 - Cam Follower and Track Roller - BDI
4-1/2" Roller Diameter; 2" Roller Width; Flat Roller Surface Profile; 1-1/4" Stud Diameter; 1-1/4-12 Thread Size; Standard Stud Stud Profile; ...
SMITH BEARING PCR-4-1/2 Track Roller,Stud,Roller Dia ... - Walmart
Item Type: Track Roller; Brand: SMITH BEARING; Manufacturer Part Number: PCR-4-1/2. We aim to show you accurate product information.
Smith Bearing | PCR-4-1/2 | PCR Series Smith-Trax | Applied
Shop Smith Bearing PCR-4-1/2 at Applied.com, which includes; Cam Follower, 4 1/2" OD Straight Roller, 1 1/4" Standard Stud, 1 1/4-12 Thread, Metal Plug End, ...
Track Roller, Stud, Roller Dia. 4-1/2 In. - Zoro Tools
Smith Bearing #PCR-4-1/2 Specifications ; Roller Style: Stud ; Roller Shape: Flat ; Face Design: Plain ; Roller Dia.: 4.5 in ; Roller Width: 2.0 in ...Bearing Type: Tapered RollerRoller Type: PlainRoller Width (In.): 2.0000Roller Width: 2.0 in$235.49 · In stock
PCR: Plain Stud Type - Products - Manufacturer of Smith ...
PCR series bearings are designed to handle both axial and radial loads by using Tapered Roller Bearings ... 4-1/2. 35,800. PCR-6. 6.000. 3.000. 2.500. 5-1/2.
SMITH PCR-4-1/2 Cam Follower and Track Roller - Stud Type Video